TATA Hitachi EH 3500AC-3 Dump Truck Price in India, Specifications, Features
TATA Hitachi EH 3500AC-3 Rigid Dump Truck is a mid-range truck with 181 tonnes nominal payload and has reputation for excellent hauling capabilities. The TATA Hitachi-designed AC drives make the hauler a more valuable asset in mining works.
Today here in this article, I am going to introduce the TATA Hitachi EH 3500AC-3 Dump Truck Information such that price list, engine performance, Drive axle, Transmission, Hydraulics system, steering system, Body capacity, and more,
That all kinds of information, are genuine and reliable. I hope it will be helpful to you to buy or sell this model Dump Truck. Ok friends, So Let’s start it.
Also Check:
- TATA Hitachi ZAXIS 120 H
- TATA Hitachi EX 200 LC Super
- TATA Hitachi ZAXIS 220 LC
- TATA Hitachi EX 110 Super
- TATA Hitachi EH 3500AC-3
- TATA Hitachi EH 4000AC-3
- TATA Hitachi EH 1700-3 Dump Truck
- TATA Hitachi Motor Graders TG 160
- TATA Hitachi EH 5000AC-3 Dump Truck
- TATA Hitachi EH 1100-5 Dump Truck
- Tata Hitachi Dump Trucks
- TATA Hitachi EX 210 LC
- TATA Hitachi EH 1700-3 Dump Truck
TATA Hitachi EH 3500AC-3 Main Facts
- Model Code: EH 3500AC-3
- Engine Power: 1491 KW (2000 HP)
- Max GMW: 322,000 kg
- Max Payload: 200 Ton
TATA Hitachi EH 3500AC-3 Dump Truck Price in India
I haven’t a genuine price so friends please contact on this Toll-Free Number and Also any other Inquiry 1800 3456 500.
TATA Hitachi EH 3500AC-3 Dump Truck Specifications
| ENGINE | |
| Model | Cummins QSKTA50-CE |
| Type | 4 Cycle Diesel w/ MCR fuel system |
| Aspiration | 2 stage Turbocharged & Low-Temperature Aftercooled |
| Emission Certification | U.S. EPA Tier 2 |
| Gross Power @1900 min-1 (rpm) SAE J1995 | 1 491 kW (2 000 HP) |
| Net power @1900 min-1 (rpm) | 1 398 kW (1 874 HP) |
| Maximum Torque @1 500 min-1 (rpm) SAE J1995 | 7 871 N.m (803 kgf.m) |
| No. of Cylinders | 16 |
| Bore & Stroke | 159 x 159 mm |
| Displacement | 50.3 L |
| Starting | 24 Volt Electric |
| Optional: | |
| Model | MTU 12V4000 C21 |
| Type | 4 Cycle Diesel w/ DDEC |
| Aspiration | 1 stage Turbocharged & Low-Temperature Aftercooled |
| Emission Certification | Not Certified |
| Gross Power @1900 min-1 (rpm) SAE J1995 | 1 510 kW (2 025 HP) |
| Net power @1900 min-1 (rpm) | 1 417 kW (1 900 HP) |
| Maximum Torque @1 500 min-1 (rpm) SAE J1995 | 8 199 N.m (836 kgf.m) |
| No. of Cylinders | 12 |
| Bore & Stroke | 165 x 190 mm |
| Displacement | 48.8 L |
| Starting | 24 Volt Electric |
| ELECTRIC DRIVE | |
| HITACHI AC-Drive System | |
| AC Control Cabinet | |
| Rectifier | |
| Number of units | 1 |
| Rated capacity | 1340 kW |
| IGBT Inverter | |
| Number of units | 2 |
| Rated capacity per unit | 800 kVA |
| Chopper | |
| Number of units | 2 |
| Rated capacity per unit | 1300 kW |
| Alternator | |
| Number of units | 1 |
| Capacity | 1500 kVA at 1 900min-1 (rpm) |
| AC Wheel Motor | |
| Number of units | 2 |
| Capacity per unit | 620 kW |
| Air-cooled by an inverter-controlled AC drive blower. | |
| Grid Box (Electric Brake) | |
| Number of modules | 4 |
| Capacity per unit | 625 kW (3 min.) |
| Equipped with inverter-controlled variable speed cooling fan. | |
| Axle | |
| Planetary Ratio | 35.2 : 1 |
| Maximum Speed (Continuous) | 56 km/h |
| TIRES | |
| Front and Rear | Rim Width |
| 37.00R57 (standard) | 736.6 mm (29 in) |
| 40.00R57 | 736.6 mm (29 in) |
| ELECTRICAL SYSTEM | |
| Twenty-four-volt system. 140 ampere Cummins engine driven or 260 ampere MTU engine driven alternator. Four 245H52, 12 volts, heavy-duty batteries connected in series/parallel. | |
| BODY CAPACITIES | |
| Struck (SAE) | 80.4 m3 |
| Heaped 3:1 | 105 m3 |
| Heaped 2:1 (SAE) | 117 m3 |
| Body capacity and payload are subject to change based on customer-specific material density and application. | |
| STEERING SYSTEM | |
| Closed-center, full-time hydrostatic power steering system using two double-acting cylinders and a variable displacement piston pump. Hitachi accumulators provide supplementary steering in accordance with ISO 5010 (SAE J1511), supplying a constant steering rate under all conditions. A tilt/telescopic steering wheel with 35 degrees of tilt and 57 mm telescopic travel is standard. | |
| Turning Diameter (ISO 7457 | 29.3 m |
| HYDRAULIC SYSTEM | |
| Body Raise Travel | 59.0 degrees |
| Body Raise Time | 17.5 sec |
| Body Down Time (Float) | 15.0 sec |
| BRAKE SYSTEM | |
| The Brake system complies with ISO 3450 (SAE J1473). | |
| Service Brake | |
| Service braking for the EH3500AC-3 is made up of front and rear hydraulically applied brakes and the electric brake. | |
| Front Axle – Dry Disc | |
| Disc Diameter Each (2 discs/axle, 3 calipers/disc) | 121.7 cm |
| Rear Axle – Dry Disc | |
| Disc Diameter Each (2 discs/axle, 3 calipers/disc) | 109 cm |
| Secondary | |
| Two of the front hydraulic, rear hydraulic, and electric brakes within the service brake system provide modulated reserve braking capability. Both front and rear hydraulic brakes are automatically applied when loss of pressure is detected. | |
| Parking Brake | |
| This system is designed to use spring-applied, hydraulically released brake calipers to hold the truck stationary | |
| Electric Brake | |
| The Electric Brake is used for the usual operating brake for the EH3500AC-3. | |
| Maximum dynamic braking (Standard). | 2 800 kW |
| Load/Dump Brake Apply | |
| Through activation of a switch by the operator, a solenoid is energized, sending full brake pressure to apply the rear Wet Disc brakes. For use during the load and dump cycles. | |
| WEIGHTS (Approximate) | |
| With Standard 37.00R57 Tires | |
| Chassis with Hoist & Body parts | 118 000 kg |
| Body excluding body parts | 23 000 kg |
| Net Machine Weight | 141 000 kg |
| The Net Machine Weight specification includes operator and 100 % fuel. | |
| Nominal Payload | 181 tonnes |
| Target GMOW | 322 000 kg |
| Weight Distribution | FRONT REAR |
| Empty | 48 % 52 % |
| Loaded | 33 % 67 % |
| With Optional 40.00R57 Tires | |
| Chassis with Hoist & Body parts | 123 000 kg |
| Body excluding body parts | 23 000 kg |
| Net Machine Weight | 146 000 kg |
| The Net Machine Weight specification includes operator and 100 % fuel. | |
| Nominal Payload | 178 tonnes |
| Target GMOW | 324 000 kg |
| SERVICE CAPACITIES | |
| Crankcase (includes filters): Cummins | 200 L |
| Crankcase (includes filters): MTU | 190 L |
| Engine Cooling System: Cummins | 531 L |
| Engine Cooling System: MTU | 543 L |
| Fuel Tank (Standard) | 2 040 L |
| Fuel Tank (Optional) | 3 690 L |
| Hydraulic system | 750 L |
| Planetary Drives (L & R) | 218 L |
| Front Wheels (L & R) | 17 L |
| Windshield Washer | 20 L |
| Main Accumulator | 70 L |
Final Words
I hope you like this article, but if you have any problem regarding this article, then please comment on us. If you have any suggestions for this article, then please tell us. We will immediately apply it. Thanks for visiting our site and staying with me for more stuff like this.