TATA Hitachi Motor Graders TG 160 Price, Specification & Review
TATA Hitachi Motor Graders TG 160 Price in India, Specification, Review, Overview
The long blade TATA Hitachi Motor Graders TG 160 is the best for flattening surfaces during the grading process. TATA Hitachi TG 160 Motor Grader is best used in the construction and maintenance of roads.
Are you willing to buy TATA Hitachi Motor Graders TG 160? And do you want to know about the Price, Key features, Hydraulic system, Transmission, Travel speed, images, and more? if yes, then don’t worry my friends, cause Here in this article of mine, I am going to share with you all kinds of information which you need to know about it.
Also Check:
- TATA Hitachi ZAXIS 120 H
- TATA Hitachi EX 200 LC Super
- TATA Hitachi ZAXIS 220 LC
- TATA Hitachi EX 110 Super
- TATA Hitachi EH 3500AC-3
- TATA Hitachi EH 4000AC-3
- TATA Hitachi EH 1700-3 Dump Truck
- TATA Hitachi Motor Graders TG 160
- TATA Hitachi EH 5000AC-3 Dump Truck
- TATA Hitachi EH 1100-5 Dump Truck
- Tata Hitachi Dump Trucks
- TATA Hitachi EX 210 LC
- TATA Hitachi EH 1700-3 Dump Truck
TATA Hitachi Motor Graders TG 160 Quick Facts
- Model Code: TG 160
- Engine Power: 155 hp
- Operating Weight: 14,980 kg
- Cylinders: 6
- Fuel: diesel
- Steering: Hydrostatic
Also Read:
- TATA Hitachi EH 4000 AC-3 Dump Truck
- TATA Hitachi EH 5000AC-3 Dump Truck
- TATA Hitachi EH 1100-5 Dump Truck
- TATA Hitachi EH 1700-3 Dump Truck
- TATA Hitachi EH 3500AC-3 Dump Truck
TATA Hitachi Motor Graders TG 160 Price
TATA Hitachi Motor Graders TG 160 price Starts at 20 Lakh if you have any query so please contact us on this toll-free number 1800 3456 500.
TATA Hitachi Motor Graders TG 160 Specifications
| ENGINE | |
| Make | Cummins |
| Model | 6BTAA 5.9-150CC |
| Max Power | 155 HP @ 2000RPM |
| Rated power | 150 HP @ 2200RPM |
| Fuel | Diesel |
| Cylinders | 6 |
| Type | 4 stroke, direct injection |
| Aspiration | Turbo charged & inter cooled |
| Max torque | 655 Nm@ 1500-1600 rpm |
| TRANSMISSION | |
| Type | ZF ERGPOWER Transmission, automatic and manual gear shift |
| Model | 6 WG 160 |
| Control | Electric, signal lever selector switch |
| TRAVEL SPEED | |
| 6F | 5.23/8.07/12.41/18.47/27.29/40.00 KMPH |
| 3R | 5.5/13.08/28.78 KMPH |
| DRAWBAR PULL | |
| Drawbar pull | 137105 N |
| HYDRAULIC SYSTEM | |
| Pump | Load sensing gear pump |
| Max Flow | 200 lpm @ 2200 rpm |
| Max working pressure | 190 bar |
| STEERING | |
| Type | Hydrostatic |
| Pump | Vane type |
| Flow | 25 cc/rev |
| Steering cylinders | 2 Nos |
| Wheel steer angle | +/-480 |
| Articulation cylinders | 2 Nos |
| Hydraulic actuated artculation | +/-250 |
| Min, turning radius | 7.3 m |
| REAR TANDEM DRIVE HOUSING | |
| Tandem oscilliation | +/-180 |
| FRONT AXLE | |
| Front axle oscillation | 190 |
| Wheel lean | 180 |
| Min. ground clearance at the front axle | 622 mm |
| REAR AXLE | |
| Type | ZF tandem axle |
| Model | MTG 3085 |
| Min. ground clearance | 622 MM |
| Differential | 100 % Differential lock |
| BLADE | |
| Blade size | 3658 x 620 x 25 mm |
| Lift above ground | 430 mm |
| Blade side shift with articulation | Left 1803 mm Right 1119 mm |
| Blade side shift without articulation | Left 1948 mm Right 1246 mm |
| Blade pitch range Backword | 50 |
| Blade pitch range Forward | 400 |
| BRAKE SYSTEM | |
| Service Brake | Foot operated air over hydraulic wet disc brake on rear four wheels, with two independent circuits |
| Emergency Brake | Failsafe spring actuated hydraulic release enclosed wet disc brake built-in axle. |
| Parking Brake | Failsafe spring actuated hydraulic release enclosed wet disc brake built-in axle. |
| CAPACITIES | |
| Fuel tank | 290 L |
| Cooling system | 45 L |
| Crank case | 14.3 L |
| Transmission | 21 L |
| Tandem case(each) | 43 L |
| Hydraulic system & tank | 200 L |
| Rear axle | 21 L |
| Worm gear reduction | 3 L |
| OPERATING WEIGHT | |
| Front wheels | 4990 kg |
| Rear Wheels | 9990 kg |
| Total | 14980 kg |
| TYRE SIZE | |
| Front | 17.5 x 25 – 16 PR |
| Rear | 17.5 x 25 – 16 PR |
| ATTACHMENTS | |
| Scarifier front V-type-weight | 660 kg |
| Working width | 1148 mm |
| Scarifying depth | 318 mm |
| Scarifier shank holders | 5 Nos |
| OPTIONAL ATTACHMENTS | |
| Ripper attachments | |
| Dozer Blade | |
| Counter weight | |
| DIMENSIONAL DETAILS | |
| Overall height | 3500 mm |
| Tread width | 2300 mm |
| Overall width | 2725 mm |
| Blade width | 3658 mm |
| Height to top of exhaust | 3087 mm |
| Mid tandem to center pivot | 1974 mm |
| Blade base | 2560 mm |
| Height of top of blade life cylinders | 3034 mm |
| Mid tandem to rear wheel center | 816 mm |
| Tandem axle spacing | 1632 mm |
| Wheel base | 6325 mm |
| Mid-tandem to end of the rear frame | 1669 mm |
| Height to axle or front | 650 mm |
| End to rear frame to the front of the front frame | 7884 mm |
| Overall length | 8566 mm |
Final Words
I hope you like this article, but if you have any queries about this article, then please comment below in the comment box my friends, we will solve your problem as soon as. And Stay tuned with me for more stuff like this friend, Thanks for visiting our site.
