John Deere 8R 410 For Sale Price, Specs, Review, Overview
The John Deere 8R 410 Tractor is the perfect match if you require a versatile machine that excels in the delights and field on the road.
The John Deere 8R 410 Tractor is the best mix of pulling power, low cost of purchase and all-round performance.
John Deere 8R 410 Tractor powered by 6-cylinder, in-line, wet-sleeve cylinder liners with four valves in head powerful diesel engine, which produces 410hp power at rated rpm 2100.
John Deere 8R 410 Tractor PowerTech™ PSS 9.0L engine and choice of transmissions deliver record-setting pulling power while assuring superior total fluid economy.
So, guys!! Are you looking for John Deere 8R 410 Tractor Price in the USA, Specifications, Review, and features? Then here in this post, you will get all kinds of information that you want to know about it. I hope it will be useful to you. So let’s check it out.
John Deere 8R 410 Tractor Price in The USA
John Deere 8R 410 Tractor Key Facts
- 370HP engine power
- John Deere PowerTech™ 9.0L engine
- Choice of e23™ PowerShift or Infinitely Variable Transmission
- Independent Link Suspension
- Our most spacious, comfortable cab
John Deere 8R 410 Tractor Specifications
|Description||John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)|
|Engine type||Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head|
|Rated speed||2100 rpm|
|Aspiration||Dual turbochargers, variable geometry turbo with fixed geometry turbo in series; air-to-air aftercooling and cooled exhaust gas recirculation|
|Emission level||Final Tier 4|
|After treatment type||Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)|
549 cu in.
|Rated power||ECE-R120: 302 kW
|Rated PTO power (hp SAE)||231 kW
|Power boost||8 percent|
|Maximum engine power||ECE-R120: 326 kW
|Engine peak torque||At 1600 rpm: 1851 Nm
|PTO torque rise||40 percent|
|Type||Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h
Optional: e23 PowerShift with Efficiency Manager 50K, 50 km/h
|Type||Closed-center, pressure/flow compensated system with load sensing|
|Pump rated output||Standard: 85-cc pump: 227.1 L/min
Optional: 85-cc plus 35-cc dual pump: 321
|Available flow at a single rear SCV||1.3-cm (1/2-in.) couplers: 132 L/min
1.9-cm (3/4-in.) coupler: 159 L/min
|Available flow at front SCVs||96 L/min
|Number of rear selective control valves (SCVs)||Standard: 1.3-cm (1/2-in.) ISO couplers: 10
Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available
1.9-cm (3/4-in.) ISO coupler: 7
|Hitch category (SAE designation)||Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg
Optional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg
|Maximum lift capacity behind lift points||Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg
|Rear axle differential lock||Electrohydraulic|
|Drawbar category||Standard: Category 4
Optional: Category 4 with heavy-duty support
|Maximum vertical load||Dependent on drawbar position: 1837 to 2700 kg
4050 to 6000 lb
Optional: 2,245 kg
|Rear power take-off (PTO)|
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm
|Engine rpm (at rated PTO speeds)||e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm|
|Multispeed PTO option availability||Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable|
|PTO actuation||Electrohydraulic with adjustable modulation|
|Standard lift capacity||Category 3N ground-engaging front hitch: 5200 kg
|Front power take-off (PTO)||44 mm (1.75 in.) 20 spline, 1000 rpm
35 mm (1.375 in.) 21 spline, 1000 rpm
35 mm (1.375 in.) 6 spline, 1000 rpm (available dependent on location)
|PTO speed||1,000 PTO rpm at 2000 engine rpm|
|Type||Standard: Rack-and-pinion, double flat, or flange axles
Optional: short, double flat axle with single taper hub: Diameter: 120 x 2550 mm
4.72 x 100.4 in.
Long, double flat axle with single taper hub: Diameter: 120 x 3010 mm
4.72 x 118.5 in.
|Final drive type||Inboard planetary three pinion|
|Rear differential lock||Full-locking electrohydraulic|
Optional: 1500 Series MFWD
|Front axle differential lock||1500 Series MFWD: Full-locking electrohydraulic
ILS: Full-locking electrohydraulic
|Wheel tread range||1500 Series MFWD: 1524-3657 mm
ILS: 1524-3657 mm
|Turning radius without brakes||ILS with 380/85R34 group 42 tires at 152.4-cm (60-in.) spacing, 5.42 m
|Type||Standard: Hydraulic power-steering with electric pump back-up
Optional: ActiveCommand Steering (ACS™) with electric pump back-up
|Alternator size||Standard: 200 amp
Optional: 330 amp
|Battery options||12 V|
|Working lights||Standard: 18 halogen
Available: 18 LED
|Type of bulb in headlight (Halogen, Zenon, LED)||Standard: halogen, 65 W
|Type of bulb in beacon (Halogen, Zenon, LED)||—|
|Total cold cranking amps||1,850 CCA|
|Rollover protective structure, OOS||—|
|Seat||Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Optional: ActiveSeat™ II
|Display||Standard: Generation 4 4100 CommandCenter™ with 17.8-cm (7-in.) display
Optional: Generation 4 4600 CommandCenter with 25.4-cm (10-in.) display
|Radio||Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna|
|Inner cab volume||3.24 m3
114 cu ft
|Cab glass area||6.52 m2
70.18 sq ft
|Dimensions and weight|
|Wheelbase||MFWD: 3,080 mm
ILS: 3,050 mm
|Overall length||6,636 mm
|Drawbar clearance||376 mm
|Front axle center||MFWD: 686 mm
ILS: 590 mm
|Base machine weight||ILS™/e23: 12,700 kg
|Maximum ballast level||SAE PTO kW: 88.6 kg
SAE PTO hp: 145 lb
|Crankcase oil volume||1500 MFWD: 28 L
7.4 U.S. gal.
ILS: 27.5 L
7.3 U.S. gal.
|Fuel tank||727 L
192 U.S. gal.
|Diesel exhaust fluid (DEF) tank||37.2 L
9.8 U.S. gal.
|Cooling system||40.3 L
10.6 U.S. gal.
|Transmission-hydraulic system||MFWD: 140 L
37 U.S. gal.
ILS: 165 L
43.6 U.S. gal.
|Interval for engine oil change||500 hours|
|Interval for hydraulic/transmission oil change||1,500 hours|
|Interval for engine coolant change||6,000 hours|
|Lift capacity at full height||2,486 kg
measured at 800 mm (31.5 in.) ahead of pivot
|Maximum lift height||4735 mm
|Telematic||Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)|
|Remote diagnostics||Available with activated JDLink hardware and activations|
John Deere 8R 410 Tractor Review Video
That was all about the John Deere 8R 410 Tractor Price, Specs, Review & Features. I hope you like this post cause I assure that all kinds of information are genuine and reliable but if you have any query regarding this post, then please comment below in the comment box, I will solve your problem as soon as possible, thanks for visiting our site and stay tuned to our site for more new stuff like this my friends.