John Deere 2950 Specs, Price, Attachments Information
John Deere 2950 Specs: The John Deere 2950 is a 48-horsepower tractor, that was produced from 1983 to 1986. It has a 32.3-gallon fuel tank and a 23 gpm hydraulic pump. The 2950 Weights 9,100 pounds and has a wheelbase of 101.6 inches. The price of a John Deere 2950 in 1983 was $28,706.
The John Deere 2950 is a versatile tractor that can be used for a variety of tasks, including mowing, tilling, and hauling. It is a popular choice for small farms and hobbyists.
Here are the key Specs, price, weight, Horsepower, and details about the John Deere 2950:
John Deere 2950 Specs
Production |
|
| Manufacturer | John Deere |
| Utility tractor | |
| Built in Mannheim, Baden-Württemberg, Germany | |
| Original price | $28,706 (1983 ROPS 2WD ) |
| $40,456 (1983 Cab 4WD ) | |
John Deere 2950 Serial Numbers |
|
| Location: | Right side of main tractor frame, above front axle. |
| 1983 | 433508 |
| 1984 | 505001 |
| 1985 | 532000 |
| 1986 | 562001 |
| 1987 | 587950 |
| 1988 | 592001 |
John Deere 2950 Engine |
|
| John Deere 5.9L 6-cyl diesel | |
| Fuel tank | 32.3 gal 122.3 L |
Check here: John Deere 310C
John Deere 2950 Diesel Engine Detail |
|
| 6-cylinder | |
| liquid-cooled | |
| Displacement | 359 ci 5.9 L |
| Bore/Stroke | 4.19×4.33 inches 106 x 110 mm |
| Air cleaner | two paper elements |
| Compression | 17.4:1 |
| Rated RPM | 2500 |
| Starter volts | 12 |
| Coolant capacity | 20 qts 18.9 L |
John Deere 2950 Transmissions |
|
| 16-speed partial power shift | |
| 12-speed partially synchronized |
John Deere 2950 Hi-Lo TSS Transmission |
|
| Type | partial power shift |
| Gears | 16 forward and 8 reverse |
| Four gears in two ranges, plus reverse range with left-hand high-low power shift. Synchronized shifting between gears in a given range. | |
John Deere 2950 TSS Creeper Transmission |
|
| Type | partially synchronized |
| Gears | 12 forward and 8 reverse |
| Adds a creeper to the low and reverse ranges of the Top-Shaft Synchronized transmission. | |
John Deere 2950 Power |
|
| PTO (claimed) | 85 hp 63.4 kW |
| Drawbar (tested) | 72.12 hp 53.8 kW |
| PTO (tested) | 85.37 hp 63.7 kW |
John Deere 2950 Mechanical |
|
| Two- or four-wheel drive | |
| Differential lock | mechanical rear |
| Power steering | |
| Differential hydraulic wet disc brakes | |
| Two-post ROPS. Canopy available. Sound-Gard cab optional with available heat and air-conditioning. | |
Check here: John Deere 2510
John Deere 2950 Hydraulics |
|
| Type | closed center |
| Rear valves | 2 |
| Pump flow | 23 gpm 87.1 lpm |
John Deere 2950 Tractor hitch |
|
| Rear Type | II |
| Control | load and depth control |
| Rear lift | 4868 lbs 2208 kg |
John Deere 2950 Power Take-off (PTO) |
|
| Rear PTO | independent |
| Rear RPM | 540/1000 |
John Deere 2950 Dimensions & Tires |
|
| 2WD Wheelbase | 100.4 inches 255 cm |
| 4WD Wheelbase | 101.6 inches 258 cm |
| Weight | 10100 lbs 4581 kg |
| Front tire | 10.00-16 |
| 2WD Rear tire | 18.4-34 |
John Deere 2950 Tires |
||
|---|---|---|
| Tires | Front Tire Size | Rear Tire Size |
| 2WD Standard tires | 10.00-16 | 18.4-34 |
| 4WD Standard tires | 13.6-24.8 | 18.4-34 |
| 4WD Optional tires | 12.4-28 | 16.9-38 |
| 4WD Optional tires | 13.6-28 | 18.4-38 |
John Deere 2950 Electrical |
|
| Ground | negative |
| Charging system | alternator |
| ROPS Charging amps | 33 |
| Cab Charging amps | 55 |
| Battery volts | 12 |
John Deere 2950 Dimensions |
|
| 2WD Wheelbase | 100.4 inches 255 cm |
| 4WD Wheelbase | 101.6 inches 258 cm |
| Length | 153.2 inches 389 cm |
| Height (steering wheel) | 73 inches 185 cm |
| Height (cab) | 108.3 inches 275 cm |
| Operating weight | 10100 lbs (4WD cab) 4581 kg |
| Ballasted weight | 11045 lbs 5010 kg |
| 2WD Clearance (front axle) | 25.9 inches 65 cm |
| 4WD Clearance (front axle) | 18.9 inches 48 cm |
| Rack-and-pinion rear axle | |
John Deere 2950 Loader Attachments
John Deere 148 loader |
| 3100 lbs lift (full at pin) 1406 kg |
| 4700 lbs breakout 2131 kg |
| 38° dump |
| 32 inches reach (dumped) 81 cm |
| 11° rollback |
| 126 inches height (at pin) 320 cm |
| 102 inches clearance (dumped) 259 cm |
| 121 inches clearance (level) 307 cm |
| boom cyl: 2.5 inches 6 cm |
| bucket cyl: 2.5 inches 6 cm |
| weight: 1350 lbs 612 kg |
| Bucket width: 60 inches 152 cm Bucket width: 72 inches 182 cm Bucket width: 84 inches 213 cm Bucket width: 96 inches 243 cm |
| Bucket capacity: 0.5 cu yd 0.4 cu m Bucket capacity: 0.6 cu yd 0.5 cu m Bucket capacity: 0.8 cu yd 0.6 cu m Bucket capacity: 0.9 cu yd 0.7 cu m |
John Deere 260 loader |
| 3186 lbs lift (full at pin) 1445 kg |
| 4871 lbs breakout 2209 kg |
| 46° dump |
| 40 inches reach (dumped) 101 cm |
| 42° rollback |
| 154 inches height (at pin) 391 cm |
| 126 inches clearance (dumped) 320 cm |
| 147 inches clearance (level) 373 cm |
| boom cyl: 3.25 inches 8 cm |
| bucket cyl: 2.75 inches 6 cm |
| weight: 2178 lbs 987 kg |
| Bucket width: 61 inches 154 cm Bucket width: 73 inches 185 cm Bucket width: 85 inches 215 cm Bucket width: 97 inches 246 cm |
John Deere 265 loader |
| 3920 lbs lift (full at pin) 1778 kg |
| 5730 lbs breakout 2599 kg |
| 25.6 inches reach (dumped) 65 cm |
| 43° rollback |
| 157 inches height (at pin) 398 cm |
| 123 inches clearance (dumped) 312 cm |
| 150 inches clearance (level) 381 cm |
| boom cyl: 3.125 inches 7 cm |
| bucket cyl: 2.75 inches 6 cm |
| weight: 2619 lbs 1187 kg |
| Bucket width: 61 inches 154 cm Bucket width: 73 inches 185 cm Bucket width: 85 inches 215 cm Bucket width: 97 inches 246 cm |