John Deere 2510 Specs, Price, Attachments Information

John Deere 2510 Specs: The John Deere 2510 is a row crop tractor with a Weight ranging from 6,350 lbs to 7,380 lbs, depending on the specific model. The price of a new John Deere X739 varies depending on the Location but is generally around $15,600.

Below are the key Specs, price, weight, Horsepower, and details about the John Deere 2510:

John Deere 2510 Specs

John Deere 2510 Specs Price

Production

Manufacturer John Deere
Row-Crop tractor
Built in Waterloo, Iowa, USA
Total built 14,869 (total row-crop)
  8,023 (gas Syncro)
  5,516 (diesel Syncro)
  817 (diesel Power Shift)
  513 (gas Power Shift)
The John Deere model 2510 used a 2020 engine fitted to a modified 3020 chassis. The tractor met the need for a smaller row-crop tractor, still popular in the United States in the late 1960s.

John Deere 2510 Serial Numbers

1966 1000
1967 8958
1968 14291
Final 16501

 John Deere 2510 Variants   

2510 row-crop
2510HC high-crop

2510 John Deere Engines

John Deere 3.0L 4-cyl gasoline
John Deere 3.3L 4-cyl diesel

John Deere 2510 Gasoline Engine Detail

4-cylinder 8-valve
liquid-cooled inline valve-in-head
Displacement 180.43 ci
3.0 L
Bore/Stroke 3.86×3.86 inches
98 x 98 mm
Fuel system carburetor
Air cleaner dry
Compression 7.5:1
Rated RPM 2500
Idle RPM 800-2650
Operating RPM 1500-2500
Firing order 1-3-4-2
Starter volts 12
Coolant capacity 14 qts
13.2 L
Sparkplug gap 0.025 inches
0.635 mm
Point gap 0.020 inches
0.508 mm
Intake valve clearance 0.014 inches
0.356 mm
Exhaust valve clearance 0.022 inches
0.559 mm

John Deere 2510 Diesel Engine Detail

John Deere
4-cylinder 8-valve
liquid-cooled inline valve-in-head
Displacement 202.68 ci
3.3 L
Bore/Stroke 3.86×4.33 inches
98 x 110 mm
Air cleaner oil bath
Pre-heating ether injection
  block heater (optional)
Compression 16.3:1
Rated RPM 2500
Idle RPM 800-2650
Operating RPM 1500-2500
Firing order 1-3-4-2
Starter volts 12
Coolant capacity 14 qts
13.2 L
Intake valve clearance 0.014 inches
0.356 mm
Exhaust valve clearance 0.018 inches
0.457 mm

John Deere 2510 Transmissions

8-speed partially synchronized
8-speed full power shift

John Deere 2510 Power

Drawbar (tested) 46.82 hp
34.9 kW
PTO (tested) 54.9 hp
40.9 kW

John Deere 2510 Mechanical

Two-wheel drive
Differential lock mechanical rear
Power steering
Hydraulic wet disc brakes
Open operator station.

John Deere 2510 Capacity

Fuel 26 gal
98.4 L
Hydraulic system 11 gal (SyncroRange)
41.6 L
  14 gal (PowerShift)
53.0 L

John Deere 2510 Hydraulics

Type closed center constant pressure
Capacity 11 gal (SyncroRange)
41.6 L
  14 gal (PowerShift)
53.0 L
Pressure 2250 psi
155.1 bar
Valves 1 or 2
Oil type
  Deere 303

John Deere 2510 Tractor hitch

Rear Type II/I
Control position and lower-link draft control

John Deere 2510 Power Take-off (PTO)

Rear PTO independent
Rear RPM 540/1000 (1.375)
  1000 (1.375)
Engine RPM 540@2100
1000@2100
Front PTO optional
Front RPM 1000
Engine RPM 1000@2100

John Deere 2510 Dimensions & Tires

Wheelbase 90 inches
228 cm
Weight 6200 to 6745 pounds
Front tire 6.00-16
Rear tire 13.6-38

John Deere 2510 Electrical

Ground negative
Batteries 1 (gas)
  2 (diesel)
Battery volts 12
Battery AH 75

Also, Check here: John Deere 4430

John Deere 2510 Transmissions Overview

8-speed partially synchronized
8-speed full power shift

John Deere 2510 Syncro-Range Transmission 

Type partially synchronized
Gears 8 forward and 2 reverse
Clutch dry disc
Oil capacity 44 qts (dry)
41.6 L
  32 qts (service)
30.3 L
Oil type
  Deere 303
Oil change 1200 h
Four shift stations with two forward gears gear. A reverse gear is also available in stations one and two. Synchronized shifting between gears within each station. Tractor must be stopped to shift between stations

John Deere 2510 Power Shift Transmission

Type full power shift
Gears 8 forward and 4 reverse
Clutch hydraulic wet disc
Oil capacity 56 qts (dry)
53.0 L
  44 qts (service)
41.6 L
Oil type
  Deere 303
Oil change 1200 h

John Deere 2510 Tires

Standard tires (ag) Front: 6.00-16. Rear: 13.6-38
Check here: John Deere 3020

John Deere 2510 Dimensions

Wheelbase 90 inches
228 cm
Length 140 inches
355 cm
Width 86.2 inches
218 cm
Height (steering wheel) 74.4 inches
188 cm
Front tread 48.5 to 72.5 inches
123 to 184 cm (wheels in)
Front tread 58.25 to 82.25 inches
147 to 208 cm (wheels out)
Rear tread 56 to 88 inches
142 to 223 cm
Rear tread 56 to 104 inches
142 to 264 cm (long axle)

John Deere 2510 Weight

  6,245 lbs (gas Syncro-Range)
2832 kg
  6,745 lbs (diesel Power-Shift)
3059 kg
Shipping 6200 lbs (gas Syncro)
2812 kg
  6350 lbs (diesel Syncro)
2880 kg

John Deere 2510 Loader Attachments

Attachment Category
Loader Front-end
Backhoe Rear-end
Rotary Cutter PTO-driven
Tiller PTO-driven
Snow Blower PTO-driven
Blade Rear-mounted
Post Hole Digger PTO-driven
Pallet Forks Rear-mounted
Bale Spear Rear-mounted
Manure Bucket Rear-mounted
Grapple Bucket Rear-mounted
Utility Bucket Rear-mounted

 

Subscribe
Notify of
guest

0 Comments
Inline Feedbacks
View all comments