Challenger MT600E Series Tractors Price, Specs & Review
Challenger MT600E Series Tractors Specifications, Prices, Overview
The hydraulic system of the Challenger MT600E Series tractors has a substantially bigger pump that can supply 54 gallons per minute to the auxiliary SCVs, which results in a high degree of productivity and ease.
I’ve provided all the details you might possibly need to know about it below, including the cost, the features, the specifications, and the images. It truly will benefit you, in my opinion.
The price of a tractor from Challenger’s MT600E Series will vary according to the options and trim level that you select. If you are looking for up-to-date price information, your best bet is to speak with a Caterpillar dealer or visit the company’s website.
Challenger MT600E Series Tractors include the following highlighted features and specifications
Challenger MT645E Tractor
Challenger MT645E Tractor Price
- $161,000 USD
Challenger MT645E Tractor Key facts
- Engine: AGCO Power™ 8.4L
- Maximum ISO engine HP @ 2,000 engine rpm: 270 hp
- ISO engine HP @ 2,100 rated engine rpm: 240 hp
- PTO HP @ 2,100 rated engine rpm: 205 hp
- Number of Cylinders: 6
- Closed Center Load Sensing (CCLS) Hydraulic system
- Fuel tank capacity: 630 L
- Maximum lift capacity at Link Ends: 4,976 kg
Challenger MT645E Tractor Specifications
| ENGINE PERFORMANCE | |
| Maximum ISO engine HP @ 2,000 engine rpm (kW) | 270 (199) |
| ISO engine HP @ 2,100 rated engine rpm (kW) | 240 (177) |
| PTO HP @ 2,100 rated engine rpm (kW) | 205 (151) |
| ENGINE | |
| Type | AGCO POWER 8.4L |
| Number of Cylinders | 6 |
| Displacement liters (CID) | 8.4 (514) |
| Aspiration | Twin Turbo Chargers with eWastegate |
| ELECTRICAL SYSTEM | |
| Alternator / battery (standard) | 240 amps / 12 V (twin 120 amp alternators) |
| TRANSMISSION | |
| Type | Techstar CVT with Power Management (PM) 31 mph (50 kph) |
| Field speed range | 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse) |
| Road speed range | 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse) |
| Road speed range – 40 kph -optional | Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse) |
| Speeds forward | Infinite |
| Cruise control speeds | 4 |
| REAR AXLE | |
| 4.33 x 118 in. (110 x 2,999 mm) long axle | Standard |
| 4.33 x 105 in (110 x 2,550 mm) short axle | Optional |
| Differential lock – full-locking, electrohydraulic | Standard |
| FRONT AXLE | |
| 4-wheel drive differential lock | Standard – Full-locking, Electro-hydraulic |
| 4-wheel drive maximum steering angle | 55º |
| HYDRAULICS | |
| System type | Closed Center Load Sensing (CCLS) |
| Total flow rate – US standard gallon (L) | 54 (205) |
| Maximum pressure PSI (bar) | 2,900 (200) |
| Remote Valves – Standard/Optional | Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves |
| THREE POINT HITCH – REAR | |
| Category 3/4N Quick Hitch | Standard |
| Maximum lift capacity at Link Ends – lbs. (kg) | 20,345 (9,228) |
| THREE POINT HITCH – FRONT (OPTIONAL) | |
| Category 3 | Standard |
| Maximum lift capacity at Link Ends – lbs. (kg) | 10,970 (4,976) |
| DRAWBAR | |
| Category 3 with drop pin | Standard |
| Category 3 heavy duty with drop pin | Optional |
| Category 4 with drop pin | Optional |
| PTO | |
| Speeds RPM – standard | 1,000/1,000E |
| Shaft diameter in. (mm) | 1.75 (45) shaft, 20 spline |
| OPERATOR AREA | |
| Cab glass area ft2 (m2 ) | 67.3 (6.22) |
| Noise level dB(A) | 71 |
| OptiRide Plus hydraulic suspended cab | Standard |
| Operator seat – air suspension | Standard |
| TMC Display | Standard |
| TECHNOLOGY | |
| Auto-Guide 3000 | Standard |
| AgCommand | AgCommand-Ready Standard, Subscription Optional |
| DIMENSION& WEIGHT* | |
| Wheelbase – in. (mm) | 122 (3,100) |
| Overall length-front wt. frame to rear link arms – in. (mm) | 218.6 (5,552) |
| Maximum height over cab – in. (mm) | 141 (3,584) |
| Approx. shipping weight – lbs. (kg) | 23,810 (10,800) |
| Max Allowable Weight – lbs. (kg) | 33,070 (15,000) |
| CAPACITY | |
| Fuel tank capacity US gallon (L) | 166 (630) |
| DEF (AdBlue) usable tank capacity – US gallon (L) | 15.8 (60) |
Challenger MT655E Tractor
Challenger MT655E Tractor Price
- $ 150,700 USD
Challenger MT655E Tractor Key facts
- Engine: AGCO Power™ 8.4L
- Maximum ISO engine HP @ 2,000 engine rpm: 295 hp
- ISO engine HP @ 2,100 rated engine rpm: 265 hp
- PTO HP @ 2,100 rated engine rpm: 225 hp
- Number of Cylinders: 6
- Closed Center Load Sensing (CCLS) Hydraulic system
- Fuel tank capacity: 630 L
- Maximum lift capacity at Link Ends: 4,976 kg
Challenger MT655E Tractor Specifications
| ENGINE PERFORMANCE | |
| Maximum ISO engine HP @ 2,000 engine rpm (kW) | 295 (220) |
| ISO engine HP @ 2,100 rated engine rpm (kW) | 265 (198) |
| PTO HP @ 2,100 rated engine rpm (kW) | 225 (168) |
| ENGINE | |
| Type | AGCO POWER 8.4L |
| Number of Cylinders | 6 |
| Displacement liters (CID) | 8.4 (514) |
| Aspiration | Twin Turbo Chargers with eWastegate |
| ELECTRICAL SYSTEM | |
| Alternator / battery (standard) | 240 amps / 12 V (twin 120 amp alternators) |
| TRANSMISSION | |
| Type | Techstar CVT with Power Management (PM) 31 mph (50 kph) |
| Field speed range | 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse) |
| Road speed range | 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse) |
| Road speed range – 40 kph -optional | Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse) |
| Speeds forward | Infinite |
| Cruise control speeds | 4 |
| REAR AXLE | |
| 4.33 x 118 in. (110 x 2,999 mm) long axle | Standard |
| 4.33 x 105 in (110 x 2,550 mm) short axle | Optional |
| Differential lock – full-locking, electrohydraulic | Standard |
| FRONT AXLE | |
| 4-wheel drive differential lock | Standard – Full-locking, Electro-hydraulic |
| 4-wheel drive maximum steering angle | 55º |
| HYDRAULICS | |
| System type | Closed Center Load Sensing (CCLS) |
| Total flow rate – US standard gallon (L) | 54 (205) |
| Maximum pressure PSI (bar) | 2,900 (200) |
| Remote Valves – Standard/Optional | Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves |
| THREE POINT HITCH – REAR | |
| Category 3/4N Quick Hitch | Standard |
| Maximum lift capacity at Link Ends – lbs. (kg) | 20,345 (9,228) |
| THREE POINT HITCH – FRONT (OPTIONAL) | |
| Category 3 | Standard |
| Maximum lift capacity at Link Ends – lbs. (kg) | 10,970 (4,976) |
| DRAWBAR | |
| Category 3 with drop pin | Standard |
| Category 3 heavy duty with drop pin | Optional |
| Category 4 with drop pin | Optional |
| PTO | |
| Speeds RPM – standard | 1,000/1,000E |
| Shaft diameter in. (mm) | 1.75 (45) shaft, 20 spline |
| OPERATOR AREA | |
| Cab glass area ft2 (m2 ) | 67.3 (6.22) |
| Noise level dB(A) | 71 |
| OptiRide Plus hydraulic suspended cab | Standard |
| Operator seat – air suspension | Standard |
| TMC Display | Standard |
| TECHNOLOGY | |
| Auto-Guide 3000 | Standard |
| AgCommand | AgCommand-Ready Standard, Subscription Optional |
| DIMENSION& WEIGHT* | |
| Wheelbase – in. (mm) | 122 (3,100) |
| Overall length-front wt. frame to rear link arms – in. (mm) | 218.6 (5,552) |
| Maximum height over cab – in. (mm) | 141 (3,584) |
| Approx. shipping weight – lbs. (kg) | 23,810 (10,800) |
| Max Allowable Weight – lbs. (kg) | 33,070 (15,000) |
| CAPACITY | |
| Fuel tank capacity US gallon (L) | 166 (630) |
| DEF (AdBlue) usable tank capacity – US gallon (L) | 15.8 (60) |
Challenger MT665E Tractor
Challenger MT665E Tractor Price
- $196,135 USD (approx)
Challenger MT665E Tractor Key facts
- Engine: AGCO Power™ 8.4L
- Maximum ISO engine HP @ 2,000 engine rpm: 320 hp
- ISO engine HP @ 2,100 rated engine rpm: 290 hp
- PTO HP @ 2,100 rated engine rpm: 250 hp
- Number of Cylinders: 6
- Closed Center Load Sensing (CCLS) Hydraulic system
- Fuel tank capacity: 630 L
- Maximum lift capacity at Link Ends: 4,976 kg
Challenger MT665E Tractor Specifications
| ENGINE PERFORMANCE | |
| Maximum ISO engine HP @ 2,000 engine rpm (kW) | 320 (220) |
| ISO engine HP @ 2,100 rated engine rpm (kW) | 290 (198) |
| PTO HP @ 2,100 rated engine rpm (kW) | 250 (168) |
| ENGINE | |
| Type | AGCO POWER 8.4L |
| Number of Cylinders | 6 |
| Displacement liters (CID) | 8.4 (514) |
| Aspiration | Twin Turbo Chargers with eWastegate |
| ELECTRICAL SYSTEM | |
| Alternator / battery (standard) | 240 amps / 12 V (twin 120 amp alternators) |
| TRANSMISSION | |
| Type | Techstar CVT with Power Management (PM) 31 mph (50 kph) |
| Field speed range | 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse) |
| Road speed range | 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse) |
| Road speed range – 40 kph -optional | Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse) |
| Speeds forward | Infinite |
| Cruise control speeds | 4 |
| REAR AXLE | |
| 4.33 x 118 in. (110 x 2,999 mm) long axle | Standard |
| 4.33 x 105 in (110 x 2,550 mm) short axle | Optional |
| Differential lock – full-locking, electrohydraulic | Standard |
| FRONT AXLE | |
| 4-wheel drive differential lock | Standard – Full-locking, Electro-hydraulic |
| 4-wheel drive maximum steering angle | 55º |
| HYDRAULICS | |
| System type | Closed Center Load Sensing (CCLS) |
| Total flow rate – US standard gallon (L) | 54 (205) |
| Maximum pressure PSI (bar) | 2,900 (200) |
| Remote Valves – Standard/Optional | Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves |
| THREE POINT HITCH – REAR | |
| Category 3/4N Quick Hitch | Standard |
| Maximum lift capacity at Link Ends – lbs. (kg) | 20,345 (9,228) |
| THREE POINT HITCH – FRONT (OPTIONAL) | |
| Category 3 | Standard |
| Maximum lift capacity at Link Ends – lbs. (kg) | 10,970 (4,976) |
| DRAWBAR | |
| Category 3 with drop pin | Standard |
| Category 3 heavy duty with drop pin | Optional |
| Category 4 with drop pin | Optional |
| PTO | |
| Speeds RPM – standard | 1,000/1,000E |
| Shaft diameter in. (mm) | 1.75 (45) shaft, 20 spline |
| OPERATOR AREA | |
| Cab glass area ft2 (m2 ) | 67.3 (6.22) |
| Noise level dB(A) | 71 |
| OptiRide Plus hydraulic suspended cab | Standard |
| Operator seat – air suspension | Standard |
| TMC Display | Standard |
| TECHNOLOGY | |
| Auto-Guide 3000 | Standard |
| AgCommand | AgCommand-Ready Standard, Subscription Optional |
| DIMENSION& WEIGHT* | |
| Wheelbase – in. (mm) | 122 (3,100) |
| Overall length-front wt. frame to rear link arms – in. (mm) | 218.6 (5,552) |
| Maximum height over cab – in. (mm) | 141 (3,584) |
| Approx. shipping weight – lbs. (kg) | 23,810 (10,800) |
| Max Allowable Weight – lbs. (kg) | 33,070 (15,000) |
| CAPACITY | |
| Fuel tank capacity US gallon (L) | 166 (630) |
| DEF (AdBlue) usable tank capacity – US gallon (L) | 15.8 (60) |
Challenger MT675E Tractor
Challenger MT675E Tractor Price
- $ 170,700 USD (approx)
Challenger MT675E Tractor Key facts
- Engine: AGCO Power™ 8.4L
- Maximum ISO engine HP @ 2,000 engine rpm: 350 hp
- ISO engine HP @ 2,100 rated engine rpm: 320 hp
- PTO HP @ 2,100 rated engine rpm: 275 hp
- Number of Cylinders: 6
- Closed Center Load Sensing (CCLS) Hydraulic system
- Fuel tank capacity: 630 L
- Maximum lift capacity at Link Ends: 4,976 kg
Check Here:
Challenger MT675E Tractor Specifications
| ENGINE PERFORMANCE | |
| Maximum ISO engine HP @ 2,000 engine rpm (kW) | 350 (261) |
| ISO engine HP @ 2,100 rated engine rpm (kW) | 320 (239) |
| PTO HP @ 2,100 rated engine rpm (kW) | 275 (205) |
| ENGINE | |
| Type | AGCO POWER 8.4L |
| Number of Cylinders | 6 |
| Displacement liters (CID) | 8.4 (514) |
| Aspiration | Twin Turbo Chargers with eWastegate |
| ELECTRICAL SYSTEM | |
| Alternator / battery (standard) | 240 amps / 12 V (twin 120 amp alternators) |
| TRANSMISSION | |
| Type | Techstar CVT with Power Management (PM) 31 mph (50 kph) |
| Field speed range | 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse) |
| Road speed range | 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse) |
| Road speed range – 40 kph -optional | Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse) |
| Speeds forward | Infinite |
| Cruise control speeds | 4 |
| REAR AXLE | |
| 4.33 x 118 in. (110 x 2,999 mm) long axle | Standard |
| 4.33 x 105 in (110 x 2,550 mm) short axle | Optional |
| Differential lock – full-locking, electrohydraulic | Standard |
| FRONT AXLE | |
| 4-wheel drive differential lock | Standard – Full-locking, Electro-hydraulic |
| 4-wheel drive maximum steering angle | 55º |
| HYDRAULICS | |
| System type | Closed Center Load Sensing (CCLS) |
| Total flow rate – US standard gallon (L) | 54 (205) |
| Maximum pressure PSI (bar) | 2,900 (200) |
| Remote Valves – Standard/Optional | Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves |
| THREE POINT HITCH – REAR | |
| Category 3/4N Quick Hitch | Standard |
| Maximum lift capacity at Link Ends – lbs. (kg) | 20,345 (9,228) |
| THREE POINT HITCH – FRONT (OPTIONAL) | |
| Category 3 | Standard |
| Maximum lift capacity at Link Ends – lbs. (kg) | 10,970 (4,976) |
| DRAWBAR | |
| Category 3 with drop pin | Standard |
| Category 3 heavy duty with drop pin | Optional |
| Category 4 with drop pin | Optional |
| PTO | |
| Speeds RPM – standard | 1,000/1,000E |
| Shaft diameter in. (mm) | 1.75 (45) shaft, 20 spline |
| OPERATOR AREA | |
| Cab glass area ft2 (m2 ) | 67.3 (6.22) |
| Noise level dB(A) | 71 |
| OptiRide Plus hydraulic suspended cab | Standard |
| Operator seat – air suspension | Standard |
| TMC Display | Standard |
| TECHNOLOGY | |
| Auto-Guide 3000 | Standard |
| AgCommand | AgCommand-Ready Standard, Subscription Optional |
| DIMENSION& WEIGHT* | |
| Wheelbase – in. (mm) | 122 (3,100) |
| Overall length-front wt. frame to rear link arms – in. (mm) | 218.6 (5,552) |
| Maximum height over cab – in. (mm) | 141 (3,584) |
| Approx. shipping weight – lbs. (kg) | 23,810 (10,800) |
| Max Allowable Weight – lbs. (kg) | 33,070 (15,000) |
| CAPACITY | |
| Fuel tank capacity US gallon (L) | 166 (630) |
| DEF (AdBlue) usable tank capacity – US gallon (L) | 15.8 (60) |
Challenger MT685E Tractor
Challenger MT685E Tractor Price
- $199,900 USD (approx)
Challenger MT685E Tractor Key facts
- Engine: AGCO Power™ 8.4L
- Maximum ISO engine HP @ 2,000 engine rpm: 370 hp
- ISO engine HP @ 2,100 rated engine rpm: 340 hp
- PTO HP @ 2,100 rated engine rpm: 290 hp
- Number of Cylinders: 6
- Closed Center Load Sensing (CCLS) Hydraulic system
- Fuel tank capacity: 630 L
- Maximum lift capacity at Link Ends: 4,976 kg
Challenger MT685E Tractor Specifications
| ENGINE PERFORMANCE | |
| Maximum ISO engine HP @ 2,000 engine rpm (kW) | 370 (276) |
| ISO engine HP @ 2,100 rated engine rpm (kW) | 340 (254) |
| PTO HP @ 2,100 rated engine rpm (kW) | 290 (216) |
| ENGINE | |
| Type | AGCO POWER 8.4L |
| Number of Cylinders | 6 |
| Displacement liters (CID) | 8.4 (514) |
| Aspiration | Twin Turbo Chargers with eWastegate |
| ELECTRICAL SYSTEM | |
| Alternator / battery (standard) | 240 amps / 12 V (twin 120 amp alternators) |
| TRANSMISSION | |
| Type | Techstar CVT with Power Management (PM) 31 mph (50 kph) |
| Field speed range | 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse) |
| Road speed range | 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse) |
| Road speed range – 40 kph -optional | Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse) |
| Speeds forward | Infinite |
| Cruise control speeds | 4 |
| REAR AXLE | |
| 4.33 x 118 in. (110 x 2,999 mm) long axle | Standard |
| 4.33 x 105 in (110 x 2,550 mm) short axle | Optional |
| Differential lock – full-locking, electrohydraulic | Standard |
| FRONT AXLE | |
| 4-wheel drive differential lock | Standard – Full-locking, Electro-hydraulic |
| 4-wheel drive maximum steering angle | 55º |
| HYDRAULICS | |
| System type | Closed Center Load Sensing (CCLS) |
| Total flow rate – US standard gallon (L) | 54 (205) |
| Maximum pressure PSI (bar) | 2,900 (200) |
| Remote Valves – Standard/Optional | Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves |
| THREE POINT HITCH – REAR | |
| Category 3/4N Quick Hitch | Standard |
| Maximum lift capacity at Link Ends – lbs. (kg) | 20,345 (9,228) |
| THREE POINT HITCH – FRONT (OPTIONAL) | |
| Category 3 | Standard |
| Maximum lift capacity at Link Ends – lbs. (kg) | 10,970 (4,976) |
| DRAWBAR | |
| Category 3 with drop pin | Standard |
| Category 3 heavy duty with drop pin | Optional |
| Category 4 with drop pin | Optional |
| PTO | |
| Speeds RPM – standard | 1,000/1,000E |
| Shaft diameter in. (mm) | 1.75 (45) shaft, 20 spline |
| OPERATOR AREA | |
| Cab glass area ft2 (m2 ) | 67.3 (6.22) |
| Noise level dB(A) | 71 |
| OptiRide Plus hydraulic suspended cab | Standard |
| Operator seat – air suspension | Standard |
| TMC Display | Standard |
| TECHNOLOGY | |
| Auto-Guide 3000 | Standard |
| AgCommand | AgCommand-Ready Standard, Subscription Optional |
| DIMENSION& WEIGHT* | |
| Wheelbase – in. (mm) | 122 (3,100) |
| Overall length-front wt. frame to rear link arms – in. (mm) | 218.6 (5,552) |
| Maximum height over cab – in. (mm) | 141 (3,584) |
| Approx. shipping weight – lbs. (kg) | 23,810 (10,800) |
| Max Allowable Weight – lbs. (kg) | 33,070 (15,000) |
| CAPACITY | |
| Fuel tank capacity US gallon (L) | 166 (630) |
| DEF (AdBlue) usable tank capacity – US gallon (L) | 15.8 (60) |
Overall Challenger MT600E Series Row Crop Tractors are the perfect farming machine for heavy tasks and with affordable maintenance cost and modern technology. I hope you would like my article on Challenger MT600E Series muscular and outstanding tractors made ever. If you have any questions about it, please tell us (comment below) we will solve it. Thank you.