Challenger MT600D Series Row Crop Tractors Price, Specs & Features

Challenger MT600D Series Tractors Prices, Specification, Overview

The robust, modern Challenger MT600D Series tractor is specially built to provide excellent mileage without compromising on power or strength.

The Challenger MT600D Series tractors are fitted with AGCO Power™ engines that ensure precision power and high performance.

The TechStar™ CVT (Continuously Variable Transmission) is standard on all Challenger MT600D Series models, providing variable speed control with optimum power, engine speed, and fuel efficiency.

After an overview, you can check below  Challenger MT600D Series all models price, Specifications, Key features, images and more.

Challenger MT600D Series Row Crop Tractors Models:

  1. Challenger MT645D Tractor
  2. Challenger MT655D Tractor
  3. Challenger MT665D Tractor
  4. Challenger MT675D Tractor
  5. Challenger MT685D Tractor

Also Read: 

Challenger MT645D Tractor

Challenger MT645D Tractor

Challenger MT645D Tractor Price

  • $263,455 USD

Challenger MT645D Tractor Key facts

  • Engine: AGCO Power™
  • Displacement: 8.4L
  • Number of Cylinders: 6
  • Maximum Engine HP: 270
  • PTO HP: 205
  • Transmission: Techstar™ CVT with Power Management (PM) – 25 mph (40 kph)
  • Hydraulics System: Closed Center Load Sensing (CCLS)
  • Maximum Lift Capacity At Link End: 5000 kg
  • Fuel tank capacity: 630 L

Challenger MT645D Tractor Specifications

ENGINE PERFORMANCE
PTO HP @ 2,100-rated engine rpm (kW) 205 (153)
ISO engine HP @ 2,100-rated engine rpm (kW) 240 (179)
Maximum ISO engine HP @ 1,950 engine rpm (kW) 270 (201)
ENGINE
Rated speed (rpm) 2,100
Maximum torque rise 29-38%
Maximum power bulge 24-29 hp
Type AGCO POWER ™
Number of cylinders 6
Aspiration Turbocharged with air/air intercooler
Displacement liters (CID) 8.4 (514)
Compression Ratio 16.7 : 1
Fuel Injection System Bosch High-Pressure Common-Rail, Electronic; Injectors with Variable Injection Timing and Duration
Fuel Diesel
Fuel Filter Replaceable Filter – 30μ Prefilter – 5μ Main Filter
Lubrification System Gear Pump at Bottom of Timing Gear
Oil Filter Single, Spin On
Starting Aid Thermostart
ELECTRICAL SYSTEM
Battery 12V (X2)
Alternator 240 Amps
ISO BUS Connector 50 Amps
TRANSMISSION
Type Techstar™ CVT with Power Management (PM) – 25 mph (40 kph)
Clutches None
Field speed range 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse)
Road speed range 0.02 – 25 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse
Road speed range – 50 kph (optional) Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse)
Forward Speeds Infinite
Cruise Control Speeds 2
BRAKES AND FINAL DRIVES
Type of Final Drives Inboard Planetary
Type of Brakes Wet Disc
Brake Actuation Hydraulic
Pneumatic Trailer Brakes psi (bar) – Optional 94 – 116 (6.5 – 8)
Hydraulic Trailer Brakes psi (bar) – Optional 0 – 2,175 (0 – 150)
HYDRAULICS
System type Closed Center Load Sensing (CCLS)
Total flow rate – US standard gallon (L) 46 (175)
Maximum pressure PSI (bar) 2,900 (200)
Available flow rate per spool valves gpm (L/min) 26.4 (100)
Remotes – standard / optional Standard – 4 fingertip spool valves; Optional – up to 6 fingertip spool valves available
Hydraulic Couplers Decompression Couplers with Connect/Disconnect Under Pressure Function
Coupler Size ISO 1/2”
STEERING WHEEL
Steering Wheel Tilt and Telescopic
Tru Trak Standard
REAR AXLE
4.33 x 118 in. (110 x 2999 mm) Long Axle Standard
4.33 x 118 in. (110 x 2999 mm) Long Axle with Dual Wheel Provision Optional
4.33 x 118 in. (110 x 2999 mm) Long Axle with Dual Wheel Provision and Spacers Optional
4.33 x 105 in (110 x 2550 mm) Short Axle Optional
4.33 x 105 in (110 x 2550 mm) Short Axle with Dual Wheel Provision and Spacers Optional
Differential Lock – Full-locking, Electro-hydraulic Standard
FRONT AXLE
2-wheel drive N/A
4-wheel drive differential lock Full-locking, electrohydraulic standard
4-wheel drive maximum steering angle 55°
Quadlink front axle suspension Optional
Quadlink differential lock Full-locking, electrohydraulic
Quadlink front axle suspension Optional
Quadlink differential lock Full-locking, electrohydraulic
THREE-POINT HITCH – REAR
Category 3 Standard
Stabilizers Sway block
Maximum lift capacity lbs. (kg) – through full stroke 22,760 (10,323)
Quick Hitch Standard
THREE-POINT HITCH – FRONT (OPTIONAL)
Category 3 Standard
Integrated Front Hitch Standard with front three-point Hitch
Maximum Lift Capacity At Link End lbs (kg) 11,000 (5,000)
DRAWBAR
Category 3 with Drop Pin Standard
Category 3 Heavy-Duty with Drop Pin Optional
Category 4 with Drop Pin Optional
PTO
Speeds – standard rpm 1,000/1,000E
Engagement Electro-hydraulic
540E Optional
Shaft Diameter in (mm) 1.75 in (45 mm) Shaft, 20 spline
Engine Speed if PTO at 1000 rpm / 1000E rpm / 540E rpm 1,970 / 1,605 / 1,577
OPERATOR AREA
Cab Volume ft³ (m³) 116.5 (3.3)
Cab glass area ft² (m²) 67.3 (6.22)
Noise level dB(A) 71
OptiRide™ Plus hydraulic suspended cab Standard
Operator seat – air suspension Standard
Deluxe VRS Operator Seat Optional
Transmission Control(s) Right Console/Armrest
Forward Control(s) Left-hand Control
Cab Doors (2) Standard
TMC Display Standard
GUIDANCE SYSTEM
AGCO System 150 AutoSteering™ Precision Technology Optional
CAPACITY
Fuel tank capacity US gallon (L) 167 (630)
DEF (AdBlue) usable tank capacity US gallon (L) (optional) 16 (60)
Hydraulic Reservoir Capacity Gallon (L) 29.1 (110)
DIMENSIONS & WEIGHT*
Wheelbase in (mm) 122 (3,100)
Overall Length in (mm) 215.7 (5,480)
Maximum Height Over Cab in (mm) 141 (3,584)
Approx. Shipping Weight lbs (kg) 24,250 (11,000)
Max. Allowable Weight lbs (kg) 33,070 (15,000)
 

Challenger MT655D Tractor

Challenger MT655D Tractor

Challenger MT655D Tractor Price

  • $279,539 USD

Challenger MT655D Tractor Key facts

  • Engine: AGCO Power™
  • Displacement: 8.4L
  • Number of Cylinders: 6
  • Maximum Engine HP: 295
  • PTO HP: 225
  • Transmission: Techstar™ CVT with Power Management (PM) -40 kph
  • Hydraulics System: Closed Center Load Sensing (CCLS)
  • Maximum Lift Capacity At Link End: 5000 kg
  • Fuel tank capacity: 630 L

Challenger MT655D Tractor Specifications

ENGINE PERFORMANCE
PTO HP @ 2,100-rated engine rpm (kW) 225 (168)
ISO engine HP @ 2,100-rated engine rpm (kW) 265 (198)
Maximum ISO engine HP @ 1,950 engine rpm (kW) 295 (220)
ENGINE
Rated speed (rpm) 2,100
Maximum torque rise 29-38%
Maximum power bulge 24-29 hp
Type AGCO POWER ™
Number of cylinders 6
Aspiration Turbocharged with air/air intercooler
Displacement liters (CID) 8.4 (514)
Compression Ratio 16.7 : 1
Fuel Injection System Bosch High-Pressure Common-Rail, Electronic; Injectors with Variable Injection Timing and Duration
Fuel Diesel
Fuel Filter Replaceable Filter – 30μ Prefilter – 5μ Main Filter
Lubrification System Gear Pump at Bottom of Timing Gear
Oil Filter Single, Spin On
Starting Aid Thermostart
ELECTRICAL SYSTEM
Battery 12V (X2)
Alternator 240 Amps
ISO BUS Connector 50 Amps
TRANSMISSION
Type Techstar™ CVT with Power Management (PM) – 25 mph (40 kph)
Clutches None
Field speed range 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse)
Road speed range 0.02 – 25 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse
Road speed range – 50 kph (optional) Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse)
Forward Speeds Infinite
Cruise Control Speeds 2
BRAKES AND FINAL DRIVES
Type of Final Drives Inboard Planetary
Type of Brakes Wet Disc
Brake Actuation Hydraulic
Pneumatic Trailer Brakes psi (bar) – Optional 94 – 116 (6.5 – 8)
Hydraulic Trailer Brakes psi (bar) – Optional 0 – 2,175 (0 – 150)
HYDRAULICS
System type Closed Center Load Sensing (CCLS)
Total flow rate – US standard gallon (L) 46 (175)
Maximum pressure PSI (bar) 2,900 (200)
Available flow rate per spool valves gpm (L/min) 26.4 (100)
Remotes – standard / optional Standard – 4 fingertip spool valves; Optional – up to 6 fingertip spool valves available
Hydraulic Couplers Decompression Couplers with Connect/Disconnect Under Pressure Function
Coupler Size ISO 1/2”
STEERING WHEEL
Steering Wheel Tilt and Telescopic
Tru Trak Standard
REAR AXLE
4.33 x 118 in. (110 x 2999 mm) Long Axle Standard
4.33 x 118 in. (110 x 2999 mm) Long Axle with Dual Wheel Provision Optional
4.33 x 118 in. (110 x 2999 mm) Long Axle with Dual Wheel Provision and Spacers Optional
4.33 x 105 in (110 x 2550 mm) Short Axle Optional
4.33 x 105 in (110 x 2550 mm) Short Axle with Dual Wheel Provision and Spacers Optional
Differential Lock – Full-locking, Electro-hydraulic Standard
FRONT AXLE
2-wheel drive N/A
4-wheel drive differential lock Full-locking, electrohydraulic standard
4-wheel drive maximum steering angle 55°
Quadlink front axle suspension Optional
Quadlink differential lock Full-locking, electrohydraulic
Quadlink front axle suspension Optional
Quadlink differential lock Full-locking, electrohydraulic
THREE-POINT HITCH – REAR
Category 3 Standard
Stabilizers Sway block
Maximum lift capacity lbs. (kg) – through full stroke 22,760 (10,323)
Quick Hitch Standard
THREE-POINT HITCH – FRONT (OPTIONAL)
Category 3 Standard
Integrated Front Hitch Standard with front three-point Hitch
Maximum Lift Capacity At Link End lbs (kg) 11,000 (5,000)
DRAWBAR
Category 3 with Drop Pin Standard
Category 3 Heavy-Duty with Drop Pin Optional
Category 4 with Drop Pin Optional
PTO
Speeds – standard rpm 1,000/1,000E
Engagement Electro-hydraulic
540E Optional
Shaft Diameter in (mm) 1.75 in (45 mm) Shaft, 20 spline
Engine Speed if PTO at 1000 rpm / 1000E rpm / 540E rpm 1,970 / 1,605 / 1,577
OPERATOR AREA
Cab Volume ft³ (m³) 116.5 (3.3)
Cab glass area ft² (m²) 67.3 (6.22)
Noise level dB(A) 71
OptiRide™ Plus hydraulic suspended cab Standard
Operator seat – air suspension Standard
Deluxe VRS Operator Seat Optional
Transmission Control(s) Right Console/Armrest
Forward Control(s) Left-hand Control
Cab Doors (2) Standard
TMC Display Standard
GUIDANCE SYSTEM
AGCO System 150 AutoSteering™ Precision Technology Optional
CAPACITY
Fuel tank capacity US gallon (L) 167 (630)
DEF (AdBlue) usable tank capacity US gallon (L) (optional) 16 (60)
Hydraulic Reservoir Capacity Gallon (L) 29.1 (110)
DIMENSIONS & WEIGHT*
Wheelbase in (mm) 122 (3,100)
Overall Length in (mm) 215.7 (5,480)
Maximum Height Over Cab in (mm) 141 (3,584)
Approx. Shipping Weight lbs (kg) 24,250 (11,000)
Max. Allowable Weight lbs (kg) 33,070 (15,000)
 

Challenger MT665D Tractor

Challenger MT665D Tractor

Challenger MT665D Tractor Price

  •    $300,971 USD

Challenger MT665D Tractor Key facts

  • Engine: AGCO Power™
  • Displacement: 8.4L
  • Number of Cylinders: 6
  • Maximum Engine HP: 320
  • PTO HP: 250
  • Transmission: Techstar™ CVT with Power Management (PM) -40 kph
  • Hydraulics System: Closed Center Load Sensing (CCLS)
  • Maximum Lift Capacity At Link End: 5000 kg
  • Fuel tank capacity: 630 L

Challenger MT665D Tractor Specifications

ENGINE PERFORMANCE
PTO HP @ 2,100-rated engine rpm (kW) 250 (186)
ISO engine HP @ 2,100-rated engine rpm (kW) 290 (216)
Maximum ISO engine HP @ 1,950 engine rpm (kW) 320 (239)
ENGINE
Rated speed (rpm) 2,100
Maximum torque rise 29-38%
Maximum power bulge 24-29 hp
Type AGCO POWER ™
Number of cylinders 6
Aspiration Turbocharged with air/air intercooler
Displacement liters (CID) 8.4 (514)
Compression Ratio 16.7 : 1
Fuel Injection System Bosch High-Pressure Common-Rail, Electronic; Injectors with Variable Injection Timing and Duration
Fuel Diesel
Fuel Filter Replaceable Filter – 30μ Prefilter – 5μ Main Filter
Lubrification System Gear Pump at Bottom of Timing Gear
Oil Filter Single, Spin On
Starting Aid Thermostart
ELECTRICAL SYSTEM
Battery 12V (X2)
Alternator 240 Amps
ISO BUS Connector 50 Amps
TRANSMISSION
Type Techstar™ CVT with Power Management (PM) – 25 mph (40 kph)
Clutches None
Field speed range 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse)
Road speed range 0.02 – 25 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse
Road speed range – 50 kph (optional) Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse)
Forward Speeds Infinite
Cruise Control Speeds 2
BRAKES AND FINAL DRIVES
Type of Final Drives Inboard Planetary
Type of Brakes Wet Disc
Brake Actuation Hydraulic
Pneumatic Trailer Brakes psi (bar) – Optional 94 – 116 (6.5 – 8)
Hydraulic Trailer Brakes psi (bar) – Optional 0 – 2,175 (0 – 150)
HYDRAULICS
System type Closed Center Load Sensing (CCLS)
Total flow rate – US standard gallon (L) 46 (175)
Maximum pressure PSI (bar) 2,900 (200)
Available flow rate per spool valves gpm (L/min) 26.4 (100)
Remotes – standard / optional Standard – 4 fingertip spool valves; Optional – up to 6 fingertip spool valves available
Hydraulic Couplers Decompression Couplers with Connect/Disconnect Under Pressure Function
Coupler Size ISO 1/2”
STEERING WHEEL
Steering Wheel Tilt and Telescopic
Tru Trak Standard
REAR AXLE
4.33 x 118 in. (110 x 2999 mm) Long Axle Standard
4.33 x 118 in. (110 x 2999 mm) Long Axle with Dual Wheel Provision Optional
4.33 x 118 in. (110 x 2999 mm) Long Axle with Dual Wheel Provision and Spacers Optional
4.33 x 105 in (110 x 2550 mm) Short Axle Optional
4.33 x 105 in (110 x 2550 mm) Short Axle with Dual Wheel Provision and Spacers Optional
Differential Lock – Full-locking, Electro-hydraulic Standard
FRONT AXLE
2-wheel drive N/A
4-wheel drive differential lock Full-locking, electrohydraulic standard
4-wheel drive maximum steering angle 55°
Quadlink front axle suspension Optional
Quadlink differential lock Full-locking, electrohydraulic
Quadlink front axle suspension Optional
Quadlink differential lock Full-locking, electrohydraulic
THREE-POINT HITCH – REAR
Category 3 Standard
Stabilizers Sway block
Maximum lift capacity lbs. (kg) – through full stroke 22,760 (10,323)
Quick Hitch Standard
THREE-POINT HITCH – FRONT (OPTIONAL)
Category 3 Standard
Integrated Front Hitch Standard with front three-point Hitch
Maximum Lift Capacity At Link End lbs (kg) 11,000 (5,000)
DRAWBAR
Category 3 with Drop Pin Standard
Category 3 Heavy-Duty with Drop Pin Optional
Category 4 with Drop Pin Optional
PTO
Speeds – standard rpm 1,000/1,000E
Engagement Electro-hydraulic
540E Optional
Shaft Diameter in (mm) 1.75 in (45 mm) Shaft, 20 spline
Engine Speed if PTO at 1000 rpm / 1000E rpm / 540E rpm 1,970 / 1,605 / 1,577
OPERATOR AREA
Cab Volume ft³ (m³) 116.5 (3.3)
Cab glass area ft² (m²) 67.3 (6.22)
Noise level dB(A) 71
OptiRide™ Plus hydraulic suspended cab Standard
Operator seat – air suspension Standard
Deluxe VRS Operator Seat Optional
Transmission Control(s) Right Console/Armrest
Forward Control(s) Left-hand Control
Cab Doors (2) Standard
TMC Display Standard
GUIDANCE SYSTEM
AGCO System 150 AutoSteering™ Precision Technology Optional
CAPACITY
Fuel tank capacity US gallon (L) 167 (630)
DEF (AdBlue) usable tank capacity US gallon (L) (optional) 16 (60)
Hydraulic Reservoir Capacity Gallon (L) 29.1 (110)
DIMENSIONS & WEIGHT*
Wheelbase in (mm) 122 (3,100)
Overall Length in (mm) 215.7 (5,480)
Maximum Height Over Cab in (mm) 141 (3,584)
Approx. Shipping Weight lbs (kg) 24,250 (11,000)
Max. Allowable Weight lbs (kg) 33,070 (15,000)
 

Challenger MT675D Tractor

Challenger MT675D Tractor

Challenger MT675D Tractor Price

  •      $325,382 USD

Challenger MT675D Tractor Key facts

  • Engine: AGCO Power™
  • Displacement: 8.4L
  • Number of Cylinders: 6
  • Maximum Engine HP: 350
  • PTO HP: 275
  • Transmission: Techstar™ CVT with Power Management (PM) -40 kph
  • Hydraulics System: Closed Center Load Sensing (CCLS)
  • Maximum Lift Capacity At Link End: 5000 kg
  • Fuel tank capacity: 630 L

Challenger MT675D Tractor Specifications

ENGINE PERFORMANCE
PTO HP @ 2,100-rated engine rpm (kW) 275 (205)
ISO engine HP @ 2,100-rated engine rpm (kW) 320 (239)
Maximum ISO engine HP @ 1,950 engine rpm (kW) 350 (261)
ENGINE
Rated speed (rpm) 2,100
Maximum torque rise 29-38%
Maximum power bulge 24-29 hp
Type AGCO POWER ™
Number of cylinders 6
Aspiration Turbocharged with air/air intercooler
Displacement liters (CID) 8.4 (514)
Compression Ratio 16.7 : 1
Fuel Injection System Bosch High-Pressure Common-Rail, Electronic; Injectors with Variable Injection Timing and Duration
Fuel Diesel
Fuel Filter Replaceable Filter – 30μ Prefilter – 5μ Main Filter
Lubrification System Gear Pump at Bottom of Timing Gear
Oil Filter Single, Spin On
Starting Aid Thermostart
ELECTRICAL SYSTEM
Battery 12V (X2)
Alternator 240 Amps
ISO BUS Connector 50 Amps
TRANSMISSION
Type Techstar™ CVT with Power Management (PM) – 25 mph (40 kph)
Clutches None
Field speed range 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse)
Road speed range 0.02 – 25 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse
Road speed range – 50 kph (optional) Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse)
Forward Speeds Infinite
Cruise Control Speeds 2
BRAKES AND FINAL DRIVES
Type of Final Drives Inboard Planetary
Type of Brakes Wet Disc
Brake Actuation Hydraulic
Pneumatic Trailer Brakes psi (bar) – Optional 94 – 116 (6.5 – 8)
Hydraulic Trailer Brakes psi (bar) – Optional 0 – 2,175 (0 – 150)
HYDRAULICS
System type Closed Center Load Sensing (CCLS)
Total flow rate – US standard gallon (L) 46 (175)
Maximum pressure PSI (bar) 2,900 (200)
Available flow rate per spool valves gpm (L/min) 26.4 (100)
Remotes – standard / optional Standard – 4 fingertip spool valves; Optional – up to 6 fingertip spool valves available
Hydraulic Couplers Decompression Couplers with Connect/Disconnect Under Pressure Function
Coupler Size ISO 1/2”
STEERING WHEEL
Steering Wheel Tilt and Telescopic
Tru Trak Standard
REAR AXLE
4.33 x 118 in. (110 x 2999 mm) Long Axle Standard
4.33 x 118 in. (110 x 2999 mm) Long Axle with Dual Wheel Provision Optional
4.33 x 118 in. (110 x 2999 mm) Long Axle with Dual Wheel Provision and Spacers Optional
4.33 x 105 in (110 x 2550 mm) Short Axle Optional
4.33 x 105 in (110 x 2550 mm) Short Axle with Dual Wheel Provision and Spacers Optional
Differential Lock – Full-locking, Electro-hydraulic Standard
FRONT AXLE
2-wheel drive N/A
4-wheel drive differential lock Full-locking, electrohydraulic standard
4-wheel drive maximum steering angle 55°
Quadlink front axle suspension Optional
Quadlink differential lock Full-locking, electrohydraulic
Quadlink front axle suspension Optional
Quadlink differential lock Full-locking, electrohydraulic
THREE-POINT HITCH – REAR
Category 3 Standard
Stabilizers Sway block
Maximum lift capacity lbs. (kg) – through full stroke 22,760 (10,323)
Quick Hitch Standard
THREE-POINT HITCH – FRONT (OPTIONAL)
Category 3 Standard
Integrated Front Hitch Standard with front three-point Hitch
Maximum Lift Capacity At Link End lbs (kg) 11,000 (5,000)
DRAWBAR
Category 3 with Drop Pin Standard
Category 3 Heavy-Duty with Drop Pin Optional
Category 4 with Drop Pin Optional
PTO
Speeds – standard rpm 1,000/1,000E
Engagement Electro-hydraulic
540E Optional
Shaft Diameter in (mm) 1.75 in (45 mm) Shaft, 20 spline
Engine Speed if PTO at 1000 rpm / 1000E rpm / 540E rpm 1,970 / 1,605 / 1,577
OPERATOR AREA
Cab Volume ft³ (m³) 116.5 (3.3)
Cab glass area ft² (m²) 67.3 (6.22)
Noise level dB(A) 71
OptiRide™ Plus hydraulic suspended cab Standard
Operator seat – air suspension Standard
Deluxe VRS Operator Seat Optional
Transmission Control(s) Right Console/Armrest
Forward Control(s) Left-hand Control
Cab Doors (2) Standard
TMC Display Standard
GUIDANCE SYSTEM
AGCO System 150 AutoSteering™ Precision Technology Optional
CAPACITY
Fuel tank capacity US gallon (L) 167 (630)
DEF (AdBlue) usable tank capacity US gallon (L) (optional) 16 (60)
Hydraulic Reservoir Capacity Gallon (L) 29.1 (110)
DIMENSIONS & WEIGHT*
Wheelbase in (mm) 122 (3,100)
Overall Length in (mm) 215.7 (5,480)
Maximum Height Over Cab in (mm) 141 (3,584)
Approx. Shipping Weight lbs (kg) 24,250 (11,000)
Max. Allowable Weight lbs (kg) 33,070 (15,000)
 

Challenger MT685D Tractor

Challenger MT685D Tractor

Challenger MT685D Tractor Price

  •      $335,497 USD

Challenger MT685D Tractor Key facts

  • Engine: AGCO Power™
  • Displacement: 8.4L
  • Number of Cylinders: 6
  • Maximum Engine HP: 290
  • PTO HP: 370
  • Transmission: Techstar™ CVT with Power Management (PM) -40 kph
  • Hydraulics System: Closed Center Load Sensing (CCLS)
  • Maximum Lift Capacity At Link End: 5000 kg
  • Fuel tank capacity: 630 L

Challenger MT685D Tractor Specifications

ENGINE PERFORMANCE
PTO HP @ 2,100-rated engine rpm (kW) 290 (216)
ISO engine HP @ 2,100-rated engine rpm (kW) 340 (254)
Maximum ISO engine HP @ 1,950 engine rpm (kW) 370 (276)
ENGINE
Rated speed (rpm) 2,100
Maximum torque rise 29-38%
Maximum power bulge 24-29 hp
Type AGCO POWER ™
Number of cylinders 6
Aspiration Turbocharged with air/air intercooler
Displacement liters (CID) 8.4 (514)
Compression Ratio 16.7 : 1
Fuel Injection System Bosch High-Pressure Common-Rail, Electronic; Injectors with Variable Injection Timing and Duration
Fuel Diesel
Fuel Filter Replaceable Filter – 30μ Prefilter – 5μ Main Filter
Lubrification System Gear Pump at Bottom of Timing Gear
Oil Filter Single, Spin On
Starting Aid Thermostart
ELECTRICAL SYSTEM
Battery 12V (X2)
Alternator 240 Amps
ISO BUS Connector 50 Amps
TRANSMISSION
Type Techstar™ CVT with Power Management (PM) – 25 mph (40 kph)
Clutches None
Field speed range 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse)
Road speed range 0.02 – 25 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse
Road speed range – 50 kph (optional) Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse)
Forward Speeds Infinite
Cruise Control Speeds 2
BRAKES AND FINAL DRIVES
Type of Final Drives Inboard Planetary
Type of Brakes Wet Disc
Brake Actuation Hydraulic
Pneumatic Trailer Brakes psi (bar) – Optional 94 – 116 (6.5 – 8)
Hydraulic Trailer Brakes psi (bar) – Optional 0 – 2,175 (0 – 150)
HYDRAULICS
System type Closed Center Load Sensing (CCLS)
Total flow rate – US standard gallon (L) 46 (175)
Maximum pressure PSI (bar) 2,900 (200)
Available flow rate per spool valves gpm (L/min) 26.4 (100)
Remotes – standard / optional Standard – 4 fingertip spool valves; Optional – up to 6 fingertip spool valves available
Hydraulic Couplers Decompression Couplers with Connect/Disconnect Under Pressure Function
Coupler Size ISO 1/2”
STEERING WHEEL
Steering Wheel Tilt and Telescopic
Tru Trak Standard
REAR AXLE
4.33 x 118 in. (110 x 2999 mm) Long Axle Standard
4.33 x 118 in. (110 x 2999 mm) Long Axle with Dual Wheel Provision Optional
4.33 x 118 in. (110 x 2999 mm) Long Axle with Dual Wheel Provision and Spacers Optional
4.33 x 105 in (110 x 2550 mm) Short Axle Optional
4.33 x 105 in (110 x 2550 mm) Short Axle with Dual Wheel Provision and Spacers Optional
Differential Lock – Full-locking, Electro-hydraulic Standard
FRONT AXLE
2-wheel drive N/A
4-wheel drive differential lock Full-locking, electrohydraulic standard
4-wheel drive maximum steering angle 55°
Quadlink front axle suspension Optional
Quadlink differential lock Full-locking, electrohydraulic
Quadlink front axle suspension Optional
Quadlink differential lock Full-locking, electrohydraulic
THREE-POINT HITCH – REAR
Category 3 Standard
Stabilizers Sway block
Maximum lift capacity lbs. (kg) – through full stroke 22,760 (10,323)
Quick Hitch Standard
THREE-POINT HITCH – FRONT (OPTIONAL)
Category 3 Standard
Integrated Front Hitch Standard with front three-point Hitch
Maximum Lift Capacity At Link End lbs (kg) 11,000 (5,000)
DRAWBAR
Category 3 with Drop Pin Standard
Category 3 Heavy-Duty with Drop Pin Optional
Category 4 with Drop Pin Optional
PTO
Speeds – standard rpm 1,000/1,000E
Engagement Electro-hydraulic
540E Optional
Shaft Diameter in (mm) 1.75 in (45 mm) Shaft, 20 spline
Engine Speed if PTO at 1000 rpm / 1000E rpm / 540E rpm 1,970 / 1,605 / 1,577
OPERATOR AREA
Cab Volume ft³ (m³) 116.5 (3.3)
Cab glass area ft² (m²) 67.3 (6.22)
Noise level dB(A) 71
OptiRide™ Plus hydraulic suspended cab Standard
Operator seat – air suspension Standard
Deluxe VRS Operator Seat Optional
Transmission Control(s) Right Console/Armrest
Forward Control(s) Left-hand Control
Cab Doors (2) Standard
TMC Display Standard
GUIDANCE SYSTEM
AGCO System 150 AutoSteering™ Precision Technology Optional
CAPACITY
Fuel tank capacity US gallon (L) 167 (630)
DEF (AdBlue) usable tank capacity US gallon (L) (optional) 16 (60)
Hydraulic Reservoir Capacity Gallon (L) 29.1 (110)
DIMENSIONS & WEIGHT*
Wheelbase in (mm) 122 (3,100)
Overall Length in (mm) 215.7 (5,480)
Maximum Height Over Cab in (mm) 141 (3,584)
Approx. Shipping Weight lbs (kg) 24,250 (11,000)
Max. Allowable Weight lbs (kg) 33,070 (15,000)
 

The Challenger MT600D Series tractor is purpose-built for agribusiness professionals looking for a big-time productivity edge. This Challenger tractor is your high-capacity, high-power choice for matchless performance day after day, season after season, year after year

Leave a Comment