0

Challenger MT 800C | MT 900C Series Articulated 4-WD Tractors Details

Challenger MT 800C | MT 900C Series Articulated 4-WD Tractors Specs Overview

Hey, Friends Hi!! hope You all doing well and Most Welcome to our site. Today here in this article, I am going to share with you Challenger MT 800C / MT 900C Series Articulated 4-Wheel Drive Tractors information such as price List, Specifications, Key Features, and Images, I assure that all kinds of information are genuine and reliable, I hope it is useful to you my friends.

The Challenger is raising the bar even higher with the debut of the Challenger MT800C Series track tractors and MT900C 4WD articulated tractors. Both lines are designed with new features and improvements designed to make you even more productive and efficient. Check out it’s more details below. 

Also Check: 

Model Engine hp PTO hp
MT835C 410 (306 kW) 335 (249 kW)
MT845C/MT945C 440 (328 kW) 360 (268 kW)
MT855C/MT955C 475 (354 kW) 385 (287 kW)
MT865C/MT965C 525 (391 kW) 425 (316 kW)
MT875C/MT975C 585 (436 kW) 425 (316 kW)
 

Challenger MT945C Tractor

Challenger MT945C Tractor


Challenger MT945C Tractor Price

  • $203,800 USD

Challenger MT945C Tractor Key facts

  • Engine: Cat® C15 ACERT™ Tier III
  • Engine Power: 440 HP
  • PTO Power: 360 HP
  • Transmission: Cat® Powershift 16F / 4R
  • Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
  •  Lift Capacity: 8845 kg
  • Fuel tank capacity: 1476 L

Challenger MT945C Tractor Specifications

ENGINE
Engine Type Cat® C15 ACERT™ Tier III
Rated Engine Power – hp (kW) 440 (328)
PTO Power @ rated 2100 rpm – hp (kW 360 (268)
Engine Power Growth @ 1800 rpm 8%
Peak Engine Power – hp (kW) 475 (354)
Engine Torque Rise @ rpm 42%@1400
# Cylinders / # Valves 6 / 24
Displacement – cubic in. (L) 928 (15.2 L)
Aspiration Turbocharged / Air-to-Air Aftercooled
FUEL SYSTEM
Fuel System MEUI – ADEM™ 4 Full Electronic Control
Fuel Tank Capacity – US gal. (L) 390 (1,476)
TRANSMISSION
Type Cat® Powershift 16F / 4R
Maximum Speed – mph (kph) 24.6 (39.6)
PTO
Independent PTO 1000 rpm 20-spline 1.75” (45 mm)
(Optional) Electronic Control
ELECTRICAL SYSTEM
Alternator 185 amp
Batteries (4) 1,000 cca 12 V
HYDRAULIC SYSTEM
Type of System Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
Standard Pump Flow – gpm (lpm) 43.5 (164.7)
Optional Pump Flow – gpm (lpm) 59 (224.2)
Hydraulic Remotes 4 Standard / up to 6 Optional
Max Flow at 1 Remote – gpm (lpm) 36 (136.3)
Maximum System Pressure – psi (bar 2,900 (200)
STEERING
Steering Hydraulic Articulation
Optional System Electro-hydraulic Enhancement
Turning Angle 42°
Oscillation Angle 13°
Centerline Turning Radius – ft. (m) 16 (4.9)
AXLES & FINAL DRIVE
Manufacturer GIMA
Drive Line Torque Rating: ft.-lbs. (N*m) 9C: 13,720 (18,600)
Final Drive Double Inboard Planetary
Bar Diameter – in. (mm) 5.7 (145)
Standard Tires 710 / 70R42 Duals
Service Brakes (Front & Rear Axle) Wet Disk Spring Released
DRAWBAR
Std. Wide Swing Drawbar Swinging +/- 9°
Drawbar Load Rating – lbs. (kg) 10,000 (4,536)
Category Cat 4 (Std.)
3-POINT HITCH
Lift Capacity – lbs. (kg) 19,500 (8,845)
Category Category 3/4N
DIMENSIONS
Wheelbase – in. (mm) 156 (3,950)
Overall Width w/ Standard Tires – in. (mm) 190 (4,828)
Overall Length – in. (mm) 298 (7,569.2)
Overall Height to Top of Cab – in. (mm) 150 (3,800)
Approx. Shipping Weight – lbs. (kg)* 39,266 (17,810)
Base Operating Weight – lbs. (kg) 47,500 (21,546)
Maximum Operating Weight – lbs. (kg) 50,000 (22,680)
 

Challenger MT955C Tractor

Challenger MT955C Tractor

Challenger MT955C Tractor Price

  • $289,000 USD

Challenger MT955C Tractor Key facts

  • Engine: Cat® C15 ACERT™ Tier III
  • Engine Power: 475 HP
  • PTO Power: 385 HP
  • Transmission: Cat® Powershift 16F / 4R
  • Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
  •  Lift Capacity: 8845 kg
  • Fuel tank capacity: 1476 L

Challenger MT955C Tractor Specifications

ENGINE
Engine Type Cat® C15 ACERT™ Tier III
Rated Engine Power – hp (kW) 475 (354)
PTO Power @ rated 2100 rpm – hp (kW 385 (287)
Engine Power Growth @ 1800 rpm 8%
Peak Engine Power – hp (kW) 513 (382)
Engine Torque Rise @ rpm 42%@1400
# Cylinders / # Valves 6 / 24
Displacement – cubic in. (L) 928 (15.2 L)
Aspiration Turbocharged / Air-to-Air Aftercooled
FUEL SYSTEM
Fuel System MEUI – ADEM™ 4 Full Electronic Control
Fuel Tank Capacity – US gal. (L) 390 (1,476)
TRANSMISSION
Type Cat® Powershift 16F / 4R
Maximum Speed – mph (kph) 24.6 (39.6)
PTO
Independent PTO 1000 rpm 20-spline 1.75” (45 mm)
(Optional) Electronic Control
ELECTRICAL SYSTEM
Alternator 185 amp
Batteries (4) 1,000 cca 12 V
HYDRAULIC SYSTEM
Type of System Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
Standard Pump Flow – gpm (lpm) 43.5 (164.7)
Optional Pump Flow – gpm (lpm) 59 (224.2)
Hydraulic Remotes 4 Standard / up to 6 Optional
Max Flow at 1 Remote – gpm (lpm) 36 (136.3)
Maximum System Pressure – psi (bar 2,900 (200)
STEERING
Steering Hydraulic Articulation
Optional System Electro-hydraulic Enhancement
Turning Angle 42°
Oscillation Angle 13°
Centerline Turning Radius – ft. (m) 16 (4.9)
AXLES & FINAL DRIVE
Manufacturer GIMA
Drive Line Torque Rating: ft.-lbs. (N*m) 9C: 13,720 (18,600)
Final Drive Double Inboard Planetary
Bar Diameter – in. (mm) 5.7 (145)
Standard Tires 710 / 70R42 Duals
Service Brakes (Front & Rear Axle) Wet Disk Spring Released
DRAWBAR
Std. Wide Swing Drawbar Swinging +/- 9°
Drawbar Load Rating – lbs. (kg) 10,000 (4,536)
Category Cat 4 (Std.)
3-POINT HITCH
Lift Capacity – lbs. (kg) 19,500 (8,845)
Category Category 3/4N
DIMENSIONS
Wheelbase – in. (mm) 156 (3,950)
Overall Width w/ Standard Tires – in. (mm) 190 (4,828)
Overall Length – in. (mm) 298 (7,569.2)
Overall Height to Top of Cab – in. (mm) 150 (3,800)
Approx. Shipping Weight – lbs. (kg)* 39,266 (17,810)
Base Operating Weight – lbs. (kg) 47,500 (21,546)
Maximum Operating Weight – lbs. (kg) 54,000 (24,494)
 

Challenger MT965C Tractor

Challenger MT965C Tractor

Challenger MT965C Tractor Price

  • $270,550 USD

Challenger MT965C Tractor Key facts

  • Engine: Cat® C15 ACERT™ Tier III
  • Engine Power: 525 HP
  • PTO Power: 425 HP
  • Transmission: Cat® Powershift 16F / 4R
  • Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
  •  Lift Capacity: 8845 kg
  • Fuel tank capacity: 1476 L

Challenger MT965C Tractor Specifications

ENGINE
Engine Type Cat® C15 ACERT™ Tier III
Rated Engine Power – hp (kW) 525 (391)
PTO Power @ rated 2100 rpm – hp (kW 425 (316)
Engine Power Growth @ 1800 rpm 8%
Peak Engine Power – hp (kW) 567 (422)
Engine Torque Rise @ rpm 42%@1400
# Cylinders / # Valves 6 / 24
Displacement – cubic in. (L) 1,105 (18.1 L)
Aspiration Turbocharged / Air-to-Air Aftercooled
FUEL SYSTEM
Fuel System MEUI – ADEM™ 4 Full Electronic Control
Fuel Tank Capacity – US gal. (L) 390 (1,476)
TRANSMISSION
Type Cat® Powershift 16F / 4R
Maximum Speed – mph (kph) 24.6 (39.6)
PTO
Independent PTO 1000 rpm 20-spline 1.75” (45 mm)
(Optional) Electronic Control
ELECTRICAL SYSTEM
Alternator 185 amp
Batteries (4) 1,000 cca 12 V
HYDRAULIC SYSTEM
Type of System Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
Standard Pump Flow – gpm (lpm) 43.5 (164.7)
Optional Pump Flow – gpm (lpm) 59 (224.2)
Hydraulic Remotes 4 Standard / up to 6 Optional
Max Flow at 1 Remote – gpm (lpm) 36 (136.3)
Maximum System Pressure – psi (bar 2,900 (200)
STEERING
Steering Hydraulic Articulation
Optional System Electro-hydraulic Enhancement
Turning Angle 42°
Oscillation Angle 13°
Centerline Turning Radius – ft. (m) 16 (4.9)
AXLES & FINAL DRIVE
Manufacturer GIMA
Drive Line Torque Rating: ft.-lbs. (N*m) 9C: 13,720 (18,600)
Final Drive Double Inboard Planetary
Bar Diameter – in. (mm) 5.7 (145)
Standard Tires 710 / 70R42 Duals
Service Brakes (Front & Rear Axle) Wet Disk Spring Released
DRAWBAR
Std. Wide Swing Drawbar Swinging +/- 9°
Drawbar Load Rating – lbs. (kg) 10,000 (4,536)
Category Cat 4 (Std.)
3-POINT HITCH
Lift Capacity – lbs. (kg) 19,500 (8,845)
Category Category 3/4N
DIMENSIONS
Wheelbase – in. (mm) 156 (3,950)
Overall Width w/ Standard Tires – in. (mm) 190 (4,828)
Overall Length – in. (mm) 298 (7,569.2)
Overall Height to Top of Cab – in. (mm) 150 (3,800)
Approx. Shipping Weight – lbs. (kg)* 39,767 (18,038)
Base Operating Weight – lbs. (kg) 47,500 (21,546)
Maximum Operating Weight – lbs. (kg) 60,000 (27,215)
 

Challenger MT975C Tractor

Challenger MT975C Articulated 4-Wheel Drive Tractor


Challenger MT975C Tractor Price

  • $260,000 USD

Challenger MT975C Tractor Key facts

  • Engine: Cat® C15 ACERT™ Tier III
  • Engine Power: 585 HP
  • PTO Power: 425 HP
  • Transmission: Cat® Powershift 16F / 4R
  • Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
  •  Lift Capacity:NA
  • Fuel tank capacity: 1476 L

Challenger MT975C Tractor Specifications

ENGINE
Engine Type Cat® C15 ACERT™ Tier III
Rated Engine Power – hp (kW) 585 (436)
PTO Power @ rated 2100 rpm – hp (kW 425 (316)
Engine Power Growth @ 1800 rpm 8%
Peak Engine Power – hp (kW) 631 (470)
Engine Torque Rise @ rpm 42%@1400
# Cylinders / # Valves 6 / 24
Displacement – cubic in. (L) 1,105 (18.1 L)
Aspiration Turbocharged / Air-to-Air Aftercooled
FUEL SYSTEM
Fuel System MEUI – ADEM™ 4 Full Electronic Control
Fuel Tank Capacity – US gal. (L) 390 (1,476)
TRANSMISSION
Type Cat® Powershift 16F / 4R
Maximum Speed – mph (kph) 24.6 (39.6)
PTO
Independent PTO 1000 rpm 20-spline 1.75” (45 mm)
(Optional) Electronic Control
ELECTRICAL SYSTEM
Alternator 185 amp
Batteries (4) 1,000 cca 12 V
HYDRAULIC SYSTEM
Type of System Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
Standard Pump Flow – gpm (lpm) 43.5 (164.7)
Optional Pump Flow – gpm (lpm) 59 (224.2)
Hydraulic Remotes 4 Standard / up to 6 Optional
Max Flow at 1 Remote – gpm (lpm) 36 (136.3)
Maximum System Pressure – psi (bar 2,900 (200)
STEERING
Steering Hydraulic Articulation
Optional System Electro-hydraulic Enhancement
Turning Angle 42°
Oscillation Angle 13°
Centerline Turning Radius – ft. (m) 16 (4.9)
AXLES & FINAL DRIVE
Manufacturer GIMA
Drive Line Torque Rating: ft.-lbs. (N*m) 9C: 13,720 (18,600)
Final Drive Double Inboard Planetary
Bar Diameter – in. (mm) 5.7 (145)
Standard Tires 710 / 70R42 Duals
Service Brakes (Front & Rear Axle) Wet Disk Spring Released
DRAWBAR
Std. Wide Swing Drawbar Swinging +/- 9°
Drawbar Load Rating – lbs. (kg) 10,000 (4,536)
Category Cat 4 (Std.)
3-POINT HITCH
Lift Capacity – lbs. (kg) N/A
Category N/A
DIMENSIONS
Wheelbase – in. (mm) 156 (3,950)
Overall Width w/ Standard Tires – in. (mm) 190 (4,828)
Overall Length – in. (mm) 298 (7,569.2)
Overall Height to Top of Cab – in. (mm) 150 (3,800)
Approx. Shipping Weight – lbs. (kg)* 39,767 (18,038)
Base Operating Weight – lbs. (kg) 47,500 (21,546)
Maximum Operating Weight – lbs. (kg) 60,000 (27,215)
 

Challenger MT835C Track Tractor

Challenger MT835C Tractor

Challenger MT835C Tractor Price

  • $249,000 USD

Challenger MT835C Tractor Key facts

  • Engine: Cat® C15 ACERT™ Tier III
  • Engine Power: 410 HP
  • PTO Power: 335 HP
  • Transmission: Cat® Powershift 16F / 4R
  • Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
  •  Lift Capacity: 8845
  • Fuel tank capacity: 1155 L

Challenger MT835C Tractor Specifications

ENGINE
Engine Type Cat® C15 ACERT™ Tier III
Rated Engine Power – hp (kW) 410 (306)
PTO Power @ rated 2100 rpm – hp (kW 335 (249)
Engine Power Growth @ 1800 rpm 8%
Peak Engine Power – hp (kW) 442 (329)
Engine Torque Rise @ rpm 42%@1400
# Cylinders / # Valves 6 / 24
Displacement – cubic in. (L) 928 (15.2 L)
Aspiration Turbocharged / Air-to-Air Aftercooled
FUEL SYSTEM
Fuel System MEUI – ADEM™ 4 Full Electronic Control
Fuel Tank Capacity – US gal. (L) 305 (1,155)
TRANSMISSION
Type Cat® Powershift 16F / 4R
Maximum Speed – mph (kph) 24.6 (39.6)
Steering Cat® Differential Steering
GAUGE OPTIONS
GAUGE Infinitely adjustable bar axle with smooth hardbar
Standard – in. (mm) 90 – 128 (2,286 – 3,251)
BELT OPTIONS
General Ag Belts – in. (mm) 27.5, 30, 36 (698.5, 762, 914)
Extreme Application Belts – in. (mm) 18, 30, 36 (457, 762, 914)
MOBIL-TRAC UNDERCARRIAGE
Hardbar Suspension Two Marsh Mellow® Springs
Undercarriage Suspension Oscillating Bogie System w/ Suspended Midwheels
Hardbar Oscillation Stabilizer Bar with 8° Range of Motion
PTO
Independent PTO 1000 RPM, 20 Spline, 1.75” (45 mm)
(Optional) Electronically Controlled
ELECTRICAL SYSTEM
Alternator 185 amp
Batteries (4) 1,000 cca 12 V
HYDRAULIC SYSTEM
Type of System Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
Standard Pump Flow – gpm (lpm) 43.5 (164.7)
Optional Pump Flow – gpm (lpm) 59 (224.2)
Hydraulic Remotes 4 Standard / up to 6 Optional
Max Flow at 1 Remote – gpm (lpm) 36 (136.3)
Maximum System Pressure – psi (bar 2,900 (200)
DRAWBAR
Std. Wide Swing Drawbar Roller Type +/- 32° Swing
Opt. Wide Swing Controlled Drawbar Hydraulic Position Control / Dampening
Drawbar Load Rating – lbs. (kg) 10,000 (4,536)
Category Cat 4 (Std.)
3-POINT HITCH
Lift Capacity – lbs. (kg) 19,500 (8,845)
Category Category 3/4N
DIMENSIONS
Wheelbase – in. (mm) 118 (2,997)
Overall Width Wide Gauge – in. (mm) 141.8 (3,601)
Overall Length – in. (mm) 266 (6755)
Overall Height to Top of Cab – in. (mm) 136 (3460)
Drawbar Clearance – in. (mm) 14.4 (366)
Approx. Shipping Weight – lbs. (kg) 41,000 (18,597)
Maximum Operating Weight – lbs. (kg) 50,000 (22,680)
 

Challenger MT845C Track Tractor

Challenger MT845C Tractor

Challenger MT845C Tractor Price

  • $235,000 USD

Challenger MT845C Tractor Key facts

  • Engine: Cat® C15 ACERT™ Tier III
  • Engine Power: 440 HP
  • PTO Power: 360 HP
  • Transmission: Cat® Powershift 16F / 4R
  • Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
  •  Lift Capacity: 8845
  • Fuel tank capacity: 1155 L

Challenger MT845C Tractor Specifications

ENGINE
Engine Type Cat® C15 ACERT™ Tier III
Rated Engine Power – hp (kW) 440 (328)
PTO Power @ rated 2100 rpm – hp (kW 360 (268)
Engine Power Growth @ 1800 rpm 8%
Peak Engine Power – hp (kW) 475 (354)
Engine Torque Rise @ rpm 42%@1400
# Cylinders / # Valves 6 / 24
Displacement – cubic in. (L) 928 (15.2 L)
Aspiration Turbocharged / Air-to-Air Aftercooled
FUEL SYSTEM
Fuel System MEUI – ADEM™ 4 Full Electronic Control
Fuel Tank Capacity – US gal. (L) 305 (1,155)
TRANSMISSION
Type Cat® Powershift 16F / 4R
Maximum Speed – mph (kph) 24.6 (39.6)
Steering Cat® Differential Steering
GAUGE OPTIONS
GAUGE Infinitely adjustable bar axle with smooth hardbar
Standard – in. (mm) 90 – 128 (2,286 – 3,251)
BELT OPTIONS
General Ag Belts – in. (mm) 27.5, 30, 36 (698.5, 762, 914)
Extreme Application Belts – in. (mm) 18, 30, 36 (457, 762, 914)
MOBIL-TRAC UNDERCARRIAGE
Hardbar Suspension Two Marsh Mellow® Springs
Undercarriage Suspension Oscillating Bogie System w/ Suspended Midwheels
Hardbar Oscillation Stabilizer Bar with 8° Range of Motion
PTO
Independent PTO 1000 RPM, 20 Spline, 1.75” (45 mm)
(Optional) Electronically Controlled
ELECTRICAL SYSTEM
Alternator 185 amp
Batteries (4) 1,000 cca 12 V
HYDRAULIC SYSTEM
Type of System Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
Standard Pump Flow – gpm (lpm) 43.5 (164.7)
Optional Pump Flow – gpm (lpm) 59 (224.2)
Hydraulic Remotes 4 Standard / up to 6 Optional
Max Flow at 1 Remote – gpm (lpm) 36 (136.3)
Maximum System Pressure – psi (bar 2,900 (200)
DRAWBAR
Std. Wide Swing Drawbar Roller Type +/- 32° Swing
Opt. Wide Swing Controlled Drawbar Hydraulic Position Control / Dampening
Drawbar Load Rating – lbs. (kg) 10,000 (4,536)
Category Cat 4 (Std.)
3-POINT HITCH
Lift Capacity – lbs. (kg) 19,500 (8,845)
Category Category 3/4N
DIMENSIONS
Wheelbase – in. (mm) 118 (2,997)
Overall Width Wide Gauge – in. (mm) 141.8 (3,601)
Overall Length – in. (mm) 266 (6755)
Overall Height to Top of Cab – in. (mm) 136 (3460)
Drawbar Clearance – in. (mm) 14.4 (366)
Approx. Shipping Weight – lbs. (kg) 41,000 (18,597)
Maximum Operating Weight – lbs. (kg) 50,000 (22,680)
 

Challenger MT855C Track Tractor

Challenger MT855C Tractor

Challenger MT855C Tractor Price

  • $311,000 USD

Challenger MT855C Tractor Key facts

  • Engine: Cat® C15 ACERT™ Tier III
  • Engine Power: 475 HP
  • PTO Power: 385 HP
  • Transmission: Cat® Powershift 16F / 4R
  • Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
  •  Lift Capacity: 8845
  • Fuel tank capacity: 1155 L

Challenger MT855C Tractor Specifications

ENGINE
Engine Type Cat® C15 ACERT™ Tier III
Rated Engine Power – hp (kW) 475 (354)
PTO Power @ rated 2100 rpm – hp (kW 385 (287)
Engine Power Growth @ 1800 rpm 8%
Peak Engine Power – hp (kW) 513 (382)
Engine Torque Rise @ rpm 42%@1400
# Cylinders / # Valves 6 / 24
Displacement – cubic in. (L) 928 (15.2 L)
Aspiration Turbocharged / Air-to-Air Aftercooled
FUEL SYSTEM
Fuel System MEUI – ADEM™ 4 Full Electronic Control
Fuel Tank Capacity – US gal. (L) 305 (1,155)
TRANSMISSION
Type Cat® Powershift 16F / 4R
Maximum Speed – mph (kph) 24.6 (39.6)
Steering Cat® Differential Steering
GAUGE OPTIONS
GAUGE Infinitely adjustable bar axle with smooth hardbar
Standard – in. (mm) 90 – 128 (2,286 – 3,251)
BELT OPTIONS
General Ag Belts – in. (mm) 27.5, 30, 36 (698.5, 762, 914)
Extreme Application Belts – in. (mm) 18, 30, 36 (457, 762, 914)
MOBIL-TRAC UNDERCARRIAGE
Hardbar Suspension Two Marsh Mellow® Springs
Undercarriage Suspension Oscillating Bogie System w/ Suspended Midwheels
Hardbar Oscillation Stabilizer Bar with 8° Range of Motion
PTO
Independent PTO 1000 RPM, 20 Spline, 1.75” (45 mm)
(Optional) Electronically Controlled
ELECTRICAL SYSTEM
Alternator 185 amp
Batteries (4) 1,000 cca 12 V
HYDRAULIC SYSTEM
Type of System Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
Standard Pump Flow – gpm (lpm) 43.5 (164.7)
Optional Pump Flow – gpm (lpm) 59 (224.2)
Hydraulic Remotes 4 Standard / up to 6 Optional
Max Flow at 1 Remote – gpm (lpm) 36 (136.3)
Maximum System Pressure – psi (bar 2,900 (200)
DRAWBAR
Std. Wide Swing Drawbar Roller Type +/- 32° Swing
Opt. Wide Swing Controlled Drawbar Hydraulic Position Control / Dampening
Drawbar Load Rating – lbs. (kg) 10,000 (4,536)
Category Cat 4 (Std.)
3-POINT HITCH
Lift Capacity – lbs. (kg) 19,500 (8,845)
Category Category 3/4N
DIMENSIONS
Wheelbase – in. (mm) 118 (2,997)
Overall Width Wide Gauge – in. (mm) 141.8 (3,601)
Overall Length – in. (mm) 266 (6755)
Overall Height to Top of Cab – in. (mm) 136 (3460)
Drawbar Clearance – in. (mm) 14.4 (366)
Approx. Shipping Weight – lbs. (kg) 41,000 (18,597)
Maximum Operating Weight – lbs. (kg) 50,000 (22,680)
 

Challenger MT865C Track Tractor

Challenger MT865C Tractor

Challenger MT865C Tractor Price

  •  $443,568 USD

Challenger MT865C Tractor Key facts

  • Engine: Cat® C18 ACERT™ Tier III
  • Engine Power: 525 HP
  • PTO Power: 425 HP
  • Transmission: Cat® Powershift 16F / 4R
  • Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
  •  Lift Capacity: 8845
  • Fuel tank capacity: 1,249 L

Challenger MT865C Tractor Specifications

ENGINE
Engine Type Cat® C18 ACERT™ Tier III
Rated Engine Power – hp (kW) 525 (391)
PTO Power @ rated 2100 rpm – hp (kW 425 (316)
Engine Power Growth @ 1800 rpm 8%
Peak Engine Power – hp (kW) 567 (422)
Engine Torque Rise @ rpm 42%@1400
# Cylinders / # Valves 6 / 24
Displacement – cubic in. (L) 1,105 (18.1 L)
Aspiration Turbocharged / Air-to-Air Aftercooled
FUEL SYSTEM
Fuel System MEUI – ADEM™ 4 Full Electronic Control
Fuel Tank Capacity – US gal. (L) 330 (1,249)
TRANSMISSION
Type Cat® Powershift 16F / 4R
Maximum Speed – mph (kph) 24.6 (39.6)
Steering Cat® Differential Steering
GAUGE OPTIONS
GAUGE Infinitely adjustable bar axle with smooth hardbar
Standard – in. (mm) 90 – 128 (2,286 – 3,251)
BELT OPTIONS
General Ag Belts – in. (mm) 27.5, 30, 36 (698.5, 762, 914)
Extreme Application Belts – in. (mm) 18, 30, 36 (457, 762, 914)
MOBIL-TRAC UNDERCARRIAGE
Hardbar Suspension Two Marsh Mellow® Springs
Undercarriage Suspension Oscillating Bogie System w/ Suspended Midwheels
Hardbar Oscillation Stabilizer Bar with 8° Range of Motion
PTO
Independent PTO 1000 RPM, 20 Spline, 1.75” (45 mm)
(Optional) Electronically Controlled
ELECTRICAL SYSTEM
Alternator 185 amp
Batteries (4) 1,000 cca 12 V
HYDRAULIC SYSTEM
Type of System Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
Standard Pump Flow – gpm (lpm) 43.5 (164.7)
Optional Pump Flow – gpm (lpm) 59 (224.2)
Hydraulic Remotes 4 Standard / up to 6 Optional
Max Flow at 1 Remote – gpm (lpm) 36 (136.3)
Maximum System Pressure – psi (bar 2,900 (200)
DRAWBAR
Std. Wide Swing Drawbar Roller Type +/- 32° Swing
Opt. Wide Swing Controlled Drawbar Hydraulic Position Control / Dampening
Drawbar Load Rating – lbs. (kg) 10,000 (4,536)
Category Cat 4 (Std.)
3-POINT HITCH
Lift Capacity – lbs. (kg) 19,500 (8,845)
Category Category 3/4N
DIMENSIONS
Wheelbase – in. (mm) 118 (2,997)
Overall Width Wide Gauge – in. (mm) 141.8 (3,601)
Overall Length – in. (mm) 266 (6755)
Overall Height to Top of Cab – in. (mm) 136 (3460)
Drawbar Clearance – in. (mm) 14.4 (366)
Approx. Shipping Weight – lbs. (kg) 42,200 (19,142)
Maximum Operating Weight – lbs. (kg) 50,000 (22,680)
 

Challenger MT875C Track Tractor

Challenger MT875C Tractor

Challenger MT875C Tractor Price

  • $473,854 USD

Challenger MT875C Tractor Key facts

  • Engine: Cat® C18 ACERT™ Tier III
  • Engine Power: 585 HP
  • PTO Power: 425 HP
  • Transmission: Cat® Powershift 16F / 4R
  • Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
  •  Lift Capacity: N/A
  • Fuel tank capacity: 1,249 L

Challenger MT875C Tractor Specifications

ENGINE
Engine Type Cat® C18 ACERT™ Tier III
Rated Engine Power – hp (kW) 585 (436)
PTO Power @ rated 2100 rpm – hp (kW 425 (316)
Engine Power Growth @ 1800 rpm 8%
Peak Engine Power – hp (kW) 631 (470)
Engine Torque Rise @ rpm 42%@1400
# Cylinders / # Valves 6 / 24
Displacement – cubic in. (L) 1,105 (18.1 L)
Aspiration Turbocharged / Air-to-Air Aftercooled
FUEL SYSTEM
Fuel System MEUI – ADEM™ 4 Full Electronic Control
Fuel Tank Capacity – US gal. (L) 330 (1,249)
TRANSMISSION
Type Cat® Powershift 16F / 4R
Maximum Speed – mph (kph) 24.6 (39.6)
Steering Cat® Differential Steering
GAUGE OPTIONS
GAUGE Infinitely adjustable bar axle with smooth hardbar
Standard – in. (mm) 90 – 128 (2,286 – 3,251)
BELT OPTIONS
General Ag Belts – in. (mm) 27.5, 30, 36 (698.5, 762, 914)
Extreme Application Belts – in. (mm) 18, 30, 36 (457, 762, 914)
MOBIL-TRAC UNDERCARRIAGE
Hardbar Suspension Two Marsh Mellow® Springs
Undercarriage Suspension Oscillating Bogie System w/ Suspended Midwheels
Hardbar Oscillation Stabilizer Bar with 8° Range of Motion
PTO
Independent PTO 1000 RPM, 20 Spline, 1.75” (45 mm)
(Optional) Electronically Controlled
ELECTRICAL SYSTEM
Alternator 185 amp
Batteries (4) 1,000 cca 12 V
HYDRAULIC SYSTEM
Type of System Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
Standard Pump Flow – gpm (lpm) 43.5 (164.7)
Optional Pump Flow – gpm (lpm) 59 (224.2)
Hydraulic Remotes 4 Standard / up to 6 Optional
Max Flow at 1 Remote – gpm (lpm) 36 (136.3)
Maximum System Pressure – psi (bar 2,900 (200)
DRAWBAR
Std. Wide Swing Drawbar Roller Type +/- 32° Swing
Opt. Wide Swing Controlled Drawbar Hydraulic Position Control / Dampening
Drawbar Load Rating – lbs. (kg) 10,000 (4,536)
Category Cat 4 (Std.)
3-POINT HITCH
Lift Capacity – lbs. (kg) N/A
Category N/A
DIMENSIONS
Wheelbase – in. (mm) 118 (2,997)
Overall Width Wide Gauge – in. (mm) 141.8 (3,601)
Overall Length – in. (mm) 266 (6755)
Overall Height to Top of Cab – in. (mm) 136 (3460)
Drawbar Clearance – in. (mm) 14.4 (366)
Approx. Shipping Weight – lbs. (kg) 42,200 (19,142)
Maximum Operating Weight – lbs. (kg) 50,000 (22,680)
 

We are thankful to all people who visited our site if you have any query regarding this article then please leave a comment from below the comment box. We welcome your suggestion and apply changes immediately. We can update this model’s information if we have new information about it.

zala suraj

Leave a Reply

Your email address will not be published. Required fields are marked *