John Deere 8270R Specs, Price, HP, Weight & Features

Hello Guys!! Do you want to know about the John Deere 8270R Specs, New Price, Review, and Features? Then here in this post, you will get all kinds of information that you want to know about it. I hope it will be useful to you. So let’s check it out.

Advertisement

John Deere 8270R New Price, Specs, Weight, Features

John Deere 8270R Tractor For Sale Price, Specification, Review, Overview

The price of the John Deere 8270R is $347,928 USD. John Deere 8270R Tractor powered by 6-cylinder, in-line, wet-sleeve cylinder liners with four head Diesel engine valves, producing 270HP power at rated rpm 2100.

Advertisement

John Deere 8270R Tractor Key Facts: 

  • 270 Engine horsepower
  • John Deere PowerTech™ 9.0L PSS
  • Choice of 16-speed PowerShift, e23™ PowerShift, or Infinitely Variable Transmission
  • MFWD, or Independent Link Suspension
  • 6-speed PowerShift with APS; e23™ PowerShift with Efficiency Manager; available AutoPowr™ IVT™, Independent Link Suspension,
  • 225 hp Rated PTO power and Hydrostatic power-steering with electric pump back-up
  • 12,124 kg Maximum lift capacity behind lift points.

John Deere 8270R Specs

ENGINE

Description John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Engine family JJDXL09.0308
Rated speed 2100 rpm
Aspiration Dual series turbocharger with fixed geometry first stage-variable geometry second stage – air-to-air aftercooling and cooled exhaust gas recirculation
Emission level Final Tier 4
After treatment type DOC/DPF/SCR
Displacement 9 L
549 cu in.
Engine performance  
Rated power (97/68EC): 199 kW
270 hp
Rated PTO power (hp SAE) 167 kW
225 hp
Power boost 10 percent
Engine peak torque At 1600 rpm: 1,264 Nm
932 lb-ft
PTO torque rise 40 percent

Transmission

Type Standard: e23 Powershit with Efficiency Manager™ 40K, 40 km/h
26 mph
Optional: 16-speed PowerShift 40 km/h
e23 Powershift with Efficiency Manager™ 50K, 50 km/h
31 mph
John Deere AutoPowr™ IVT™ 40K, 26 mph (0.05-42 km/h)
John Deere AutoPowr™ IVT™ 50K, 31 mph (0.05-50 km/h)

Hydraulic system

Type Closed-center, pressure/flow compensated
Pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 321 L/min
85 gpm
Available flow at a single rear SCV 0.5 in. couplers: 132 L/min
35 gpm
0.75 in. couplers: 159 L/min
42 gpm
Available flow at front SCVs 96 L/min
25 gpm
Number of rear selective control valves (SCVs) Standard: 0.5 in. ISO couplers: 5
Optional: 0.5 in. ISO Couplers: 5 and 6 available
0.75 in. ISO coupler: 2
SCV control Electronic

Rear hitch

Hitch category (SAE designation) Standard: Category 3/3N: 6,350 kg (14,000 lb) standard lift at 610 mm behind hitchpoint
Optional: Category 3/3N: 8,391 kg (18,500 lb) at 610 mm behind hitchpoint
Category 4N/3 9,072 kg (20,000 lb) at 610 mm behind hitchpoint
Maximum lift capacity behind lift points Standard: 12,124 kg (26,729 lb) at 610 mm behind hitchpoint
Sensing type Electrohydraulic

Drawbar

Drawbar category Standard: Category 3
Optional: Category 4
Category 4 with heavy duty support
Maximum vertical load 1,837 kg (4,050 lb) – 2,700 kg (6,000 lb) (dependent on drawbar position)
Optional: 2,245 kg
4,950 lb
Optional: 4,990 kg
11,000 lb

Rear power take-off (PTO)

Type Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm
44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm
Engine rpm (at rated PTO speeds) 16-speed PST: 1,000 PTO rpm at 2,003 engine rpm 1,000 ECO PTO rpm at 1,596 engine rpm 540 PTO rpm at 1,817 engine rpm
IVT: 1,000 PTO rpm at 2,000 engine rpm 1,000 ECO PTO at 1594 engine rpm 540 PTO rpm at 1,814 engine rpm
e23 PST: 1,000 PTO rpm at 1,995 engine rpm 1,000 ECO PTO at 1,590 engine rpm 540 PTO rpm at 1,810 engine rpm
Front hitch  
Category Category 3N
Standard lift capacity Category 3N ground engaging front hitch: lift capacity: 5,200 kg
11,464 lb
Front power take-off (PTO) 44 mm (1.75 in) 20 spline, 1,000 rpm
35 mm (1.375 in) 21 spline, 1,000 rpm
5 mm (1.375 in) 6 spline, 1,000 rpm (available dependent on location)
PTO speed 1,000 PTO rpm at 2,000 engine rpm

Rear axle

Type Standard: Rack-and-pinion, double flat, or flange axles
Optional: Long, single taper hub: Diameter: 110 x 3010 mm
4.33 x 118.5 in.
Optional: Long, dual taper hub: Diameter: 110 x 3010 mm
Long, dual taper hub: Diameter: 120 x 3010 mm
4.72 x 118.5 in.
Short, double flat axle with single taper hub: Diameter: 120 x 2550 mm
4.72 x 100.4 in.
Final drive type Inboard planetary three pinion
Rear differential lock Full-locking electrohydraulic

Front axle

Typ Standard: 1300 Series MFWD
Optional: 1500 Series MFWD
ILS
Front axle differential lock 1300 Series MFWD: Limited Slip
1500 Series MFWD: Full-locking electrohydraulic
ILS: Full-locking electrohydraulic

John Deere 8270R Tires

Wheel tread range 1300 Series MFWD: 1,524-2,235 mm
60-88 in.
1500 Series MFWD: 1,524-3,657 mm
60-144 in.
ILS: 1,524-3,657 mm
Turning radius without brakes 1300 Series with 380/85R34 group 42 tires at 60 in. spacing, 5.4 m
17.7 ft
ILS with 380/85R34 group 42 tires at 60 in. spacing, 5.42 m
17.8 ft

Steering

Type Standard: Hydrostatic power-steering with electric pump back-up
Optional: ActiveCommand™ Steering (ACS) with electric pump back-up

Electrical system

Alternator size Standard: 200 a
Battery options 12 V
Total cold cranking amps 1850 CCA

Operator station

Rollover protective structure, OOS
Seat Standard: ComfortCommand™
Optional: ActiveSeat™
Cab suspension Optional
Instructional seat Standard
Display Standard: 4100 Generation 4 CommandCenter™ with 7 in. display
Optional: 4600 Generation 4 CommandCenter™ with 10 in. display
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume 3.597 m3
127 cu ft
Cab glass area 6.52 m2
70.18 sq ft

John Deere 8270R Dimensions & weight

Wheelbase MFWD: 3,080 mm
121.3 in.
ILS: 3,050 mm
120.1 in.
Overall length 6,636 mm
261.3 in.
Drawbar clearance 376 mm
14.8 in.
Front axle center MFWD: 686 mm
27 in.
ILS: 590 mm
23.2 in.
Base machine weight MFWD/PST: 12,680 kg
27,953 lb
ILS/e23: 14,270 kg
31,459 lb
Maximum ballast level SAE PTO kW: 88.6 kg
SAE PTO hp: 145 lb

Capacities

Crankcase oil volume 1300 MFWD: 25 L
6.6 U.S. gal.
1500 MFWD: 28 L
7.4 U.S. gal.
ILS: 27.5 L
7.3 U.S. gal.
Fuel tank Group 47/48: 615 L
162.5 U.S. gal.
Group 49: 676 L
178.6 U.S. gal.
Diesel exhaust fluid (DEF) tank 23 L
6 U.S. gal.
Cooling system 32.6 L
8.6 U.S. gal.
Transmission-hydraulic system MFWD: 140 L
37 U.S. gal.
ILS: 165 L
43.6 U.S. gal.

Serviceability

Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine coolant change 6,000 hours

Loaders

Loader H480
Lift capacity at full height 2,486 kg
5469 lb
measured at 800 mm ahead of pivot
Maximum lift height 4735 mm
186 in.

Precision AG

Guidance AutoTrac Ready
Telematic Available with JDLink™ hardware, activations, and Ethernet Harnesses (availability dependent upon destination)
Remote diagnostics Available with activated JDLink™ hardware and activations
   

Also Check:

That was all about the John Deere 8270R Price, Specs, Review and features. I hope you like this post cause I assure that all kinds of information are genuine and reliable but if you have any query regarding this post, then please comment below in the comment box, I will solve your problem as soon as possible, thanks for visiting our site and stay tuned to our site for more new stuff like this my friends.

Advertisement
Advertisement

Similar Posts

Subscribe
Notify of
guest

0 Comments
Inline Feedbacks
View all comments