John Deere 8100 Specs, Price, Attachments Information
John Deere 8100 Specs: The John Deere 8100 is a row-crop tractor, that was manufactured by John Deere in Waterloo, Iowa, USA from 1995 to 1999.
Story continues below advertisement
It is equipped with a 7.6 L six cylinder diesel engine or an 8.1 L six-cylinder diesel engine and a full power shift transmission with 16 forward and 4 reverse gears and a hydraulic wet disc clutch.
The John Deere 8100 has a rear lift capacity of 10,400 lbs (4717 kg) and a rear PTO RPM of 1000 (1.75). The weight of the tractor ranges from 16,435 lbs to 17,879 lbs depending on the configuration. The price for the John Deere 8100 was $82,500.
Story continues below advertisement
Here are the key Specs, price, weight, Horsepower, and details about the John Deere 8100:
John Deere 8100 Specs
Production |
|
| Manufacturer: | John Deere |
| Type: | Row-Crop tractor |
| Factory: | Waterloo, Iowa, USA |
John Deere 8100 Power |
|
| PTO (claimed): | 160 hp 119.3 kW |
| Drawbar (tested): | 141.81 hp 105.7 kW |
| PTO (tested): | 179.15 hp 133.6 kW |
John Deere 8100 Engine Detail |
|
| John Deere | |
| turbocharged diesel | |
| 6-cylinder | |
| liquid-cooled | |
| Displacement: | 466 ci 7.6 L |
| Bore/Stroke: | 4.5625×4.75 inches 116 x 121 mm |
| Air cleaner: | dual paper elements with aspirator |
| Compression: | 15.1:1 |
| Rated RPM: | 2200 |
| Firing order: | 1-5-3-6-2-4 |
| Starter volts: | 12 |
| Oil capacity: | 22.7 qts 21.5 L |
| Coolant capacity: | 28.8 qts 27.3 L |
John Deere 8100 Mechanical |
|
| Chassis: | 4×2 2WD |
| 4×4 MFWD 4WD | |
| Final drives: | inboard planetary |
| Differential lock: | electro-hydraulic |
| Steering: | hydrostatic power |
| Brakes: | differential hydraulic wet disc |
| Cab: | CommandView Cab standard. Row-Trak guidance optional. |
| Transmission: | 16-speed full power shift |
John Deere 8100 Capacity |
|
| Fuel: | 135 gal 511.0 L |
| Hydraulic system: | 37 gal 140.0 L |
| Front hubs: | 3.2 qts 3.0 L (each) |
| Front diff.: | 11.5 qts 10.9 L |
John Deere 8100 Hydraulics |
|
| Type: | closed center pressure-flow compensated (PFC) |
| Capacity: | 37 gal 140.0 L |
| Pressure: | 2900 psi 200.0 bar |
| Valves: | 3 to 5 |
| SCV flow: | 30 gpm 113.6 lpm |
John Deere 8100 Tractor hitch |
|
| Rear Type: | 3/3N |
| Control: | electro-hydraulic draft sensing |
| Rear lift: | 10,400 lbs 4717 kg |
| 14,165 lbs 6425 kg (optional) |
|
John Deere 8100 Power Take-off (PTO) |
|
| Rear PTO: | independent |
| Rear RPM: | 1000 (1.75) |
| 540/1000 (1.375 optional) | |
John Deere 8100 Dimensions & Tires |
|
| 2WD Wheelbase: | 122.8 inches 311 cm |
| 4WD Wheelbase: | 116.1 inches 294 cm |
| Weight: | 16435 to 18914 pounds |
| Front tire: | 11.00-24 |
| 2WD Rear tire: | 18.4R46 |
Check here: John Deere M
Story continues below advertisement
John Deere 8100 Serial Numbers |
|
| Location: | Serial number plate on the rear of the tractor, above the PTO shaft. |
| 1995: | 1001 |
| 1996: | 4001 |
| 1997: | 10001 |
| 1998: | 20001 |
| 1999: | 24001 |
John Deere 8100 Electrical |
|
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 140 |
| Batteries: | 2 |
| Battery CCA: | 925 |
| Battery volts: | 12 |
John Deere 8100 Transmission |
|
| Transmission: | John Deere PowerShift |
| Type: | full power shift |
| Gears: | 16 forward and 4 reverse |
| Clutch: | hydraulic wet disc |
| Oil capacity: | 148 qts 140.1 L |
John Deere 8100 Tires |
|
| 2WD Standard tires (ag): | Front: 11.00-24. Rear: 18.4R46 |
| Front: 14.9R34. Rear: 18.4R46 | |
Check here: John Deere 3320
John Deere 8100 Dimensions |
|
| 2WD Wheelbase: | 122.8 inches 311 cm |
| 4WD Wheelbase: | 116.1 inches 294 cm |
| Length: | 206.5 inches 524 cm |
| Height: | 120.2 inches 305 cm |
| 4WD Ground clearance: | 23.2 inches 58 cm |
| 2WD Ground clearance: | 31.5 inches 80 cm |
| Rear axle: | Optional short axle: 3.937 by 110.5 inches 99 by 2806 mm |
| Rear axle: | Standard axle: 3.937 by 118.5 inches 99 by 3009 mm |
| Rear axle: | Optional large axle: 4.331 by 118.5 inches 110 by 3009 mm |
| 2WD Front tread: | 60 to 84 inches 152 to 213 cm |
| 4WD Front tread: | 60 to 88 inches 152 to 223 cm |
John Deere 8100 Weight |
|
| 2WD Shipping: | 16435 lbs 7454 kg |
| 4WD Shipping: | 17876 lbs 8108 kg |
| Operating: | 18,914 lbs 8579 kg |
John Deere 8100 Loader Attachments
| Attachment | Description |
|---|---|
| Bucket | Used for scooping and transporting materials |
| Grapple | Used for gripping and lifting materials |
| Pallet Forks | Used for lifting and transporting pallets |
| Bale Spear | Used for lifting and transporting bales of hay or straw |
| Auger | Used for drilling holes in the ground |
| Broom | Used for sweeping and cleaning |
| Snow Blade | Used for removing snow |
| Backhoe | Used for digging and trenching |
| Dozer Blade | Used for grading and leveling |
Story continues below advertisement
