John Deere 3320 Specs, Weight, Price & Review ❤

John Deere 3320 Specs, Weight, Price & Review 

If you want to purchase a John Deere 3320 but are unsure of its specifications, weight, price, or review, I have provided information in this post.

Complete and detailed information on the John Deere 3320 Specs, Weight, Price & Review has been gathered by our team.

With associates and representatives of John Deere 3320, we validated this information. We’ll look at the John Deere 3320 Specs, Weight, Price, and a thorough evaluation in this article.

john deere 3320

John Deere 3320 Price

Price:$24,900 USD

John Deere 3320 Speed

Speed: 21 miles per hour

John Deere 3320 Height

Height: 2,360 mm (92.9 in)

John Deere 3320 Weight

Weight: 2900 lbs or 1315 kg

John Deere 3320 Specs

Dimensions

Wheelbase 5.7 ft (2 m)

Engine

Aspiration natural
Displacement 100.1 cu in (0 m)
Engine Model 3TNV88
Gross Power 32.5 hp (24 kw)
Max Torque 61.6 lbs/ft
Number of Cylinders 3
Power Measured  2600 rpm
PTO Power 25 hp (19 kw)
Torque Measured  2600 rpm

Hydraulic System

Number of Remote Control Valves 5
Pump Flow Capacity 13.9 gal/min (49 l/min)
Relief Valve Setting 2500 psi

Operating Specifications

3 Point Hitch Lift Capacity @ 24 inches 2202.5 lbs (999 kg)
Alternator Supplied Amperage 40 A
Cooling System Fluid Capacity 0.4 gal (0 l)
Engine Oil Capacity 1.3 gal (4 l)
Fuel Capacity 13.5 gal (49 l)
Operating Voltage 12 V V
Tire Size Front – 2wd / 4wd 7-14/6PR/R1
Turning Radius 8.8 ft (2 m)

Tires

Rear Tires Size 11.2-24/6PR/R1

Transmission

Number of Forward Gears 12
Number of Reverse Gears 12
Transmission Type PowrReverser

Hydraulics

Type  Open Center
Pump rated output 52.5 L/min/13.9 gpm Steering – 20.0 L/min/5.3 gpm Implement – 32.5 L/min/8.6 gpm
Pump type Dual gear
Maximum operating pressure 2500 psi
Draft control sensing Position control
Remote control valves available 5

3-Point Hitch

Category Category I
Lift capacity, 24-in. behind link arms 999 kg/2200 lb

Power Take-Off (PTO)

Standard  Rear 540 RPM
Optional  Mid 2100 RPM
Control  Independent
Clutch  Multi-disk, wet
Brake (for mid and rear PTO) Multi-disk, wet

Fluid Capacities

Crankcase with filter 4.8 L/5.1 qt
Transmission and hydraulic system 23.8 L/6.3 gal.

Final Drive

Type Spur Gear
Differential lock Yes

Cab

Compliance Complies with OSHA, SAE and CSA standards for roll-over protection
Visibility 360 degree (angle)
Air conditioning, temperature differential Yes, up to 30 degrees
Doors 2
Noise rating 80
Seat equipment Scissor-link

John Deere 3320 Review

Official Page: Click Here

Final Words

That was all about the John Deere 3320 Specs,Price, and Review, but if you have any queries regarding this post, then please comment below in the comment box, We will solve your problem as soon as possible, thanks for visiting our site, and stay tuned to our site for more new stuff like this.

John Deere 3320 FAQs

What size belt for John Deere?

If you’re looking to replace the belt of your riding lawn mower, think about the John Deere 48-inch. Mower Belt for the L120 and L130 models. Built for strength, these Kevlar cords can meet the high requirements for horsepower. This belt is compatible with model L120 as well as L130.

What is the John Deere tractor used for?

These John Deere compact loaders include models 204K, 244J, 324J, 304K and 344K. Compact loaders are the smaller John Deere wheel loaders on the market. They are generally employed for smaller projects like stacking hoppers, transferring seed and hay bales and other agricultural chores. YouTube.

How much does a John Deere tractor loader cost?

What will the John Deere 1025r price be? Price and warranty. The 1025R’s RRP is $18,990, including GST, but not the implements and attachments. The loader is priced at $5480, while the 54-inch AutoConnect mower deck has an estimated cost of $3950.

How much does a John Deere riding mower weigh?

The riding lawn mower can weigh between 805 and 900 pounds. What engine is John Deere 425? The Kawasaki FD620D engine powers it to ensure effortless mowing. How long will John Deere’s riding mowers run?

What size is the deck belt for Mower model number?

Zero-turn mowers come with large decks and require more driveshafts to the deck than conventional riding mowers, which have the same width as balconies. Snapper models 355Z 360Z, 355Z, and 400Z have the deck drive belt 1/2…

Author

  • Editorial Team

    Editorial Team has written articles on a range of topics, including tractor maintenance, farming practices, and industry news. All articles are well-researched, accurate, and written in a clear and concise manner. Articles are fact-checked by our team of independent editors so that readers will find them useful.