John Deere 630 Specs, Price, HP, Attachments Information
John Deere 630 Specs: The John Deere 630 is a two-cylinder, 30-series row-crop tractor, that was produced from 1958 to 1960.
The John Deere 630 was powered by a 2.8-liter gasoline engine that produced 49.19 horsepower (36.7 kW) at 2200 RPM. It had a four-speed transmission with a top speed of 11 mph. The 630 Weighed 5,858 pounds (2,657 kg) and had a wheelbase of 90 inches (229 cm).
The price of a new John Deere 630 varies depending on the age, Condition, and Location but generally around $2,955.
John Deere 630 Specs
Production |
|
| Manufacturer | John Deere |
| Row-Crop tractor | |
| Factories | Waterloo, Iowa, USA |
| Monterrey, Mexico | |
| Total built | 17,307 |
| Original price: $2,955 in 1958 | |
| The John Deere model 630 was available in row-crop, standard, orchard, and high-crop variants. | |
John Deere 630 Serial Numbers |
|
| 1958 | 6300000 |
| 1959 | 6302749 |
| 1960 | 6314381 |
| Final | 6318206 |
John Deere 630 Variants |
|
| 630 | row-crop |
| 630S | standard |
| 630HC | high-crop |
John Deere 630 Engines |
|
| John Deere 5.0L 2-cyl gasoline | |
| John Deere 5.0L 2-cyl all-fuel | |
| John Deere 5.0L 2-cyl LP gas | |
| Fuel tank | 20.5 gal (all-fuel) 77.6 L |
| 22.25 gal (gasoline) 84.2 L |
|
| 33 gal (LP gas) 124.9 L |
|
| Aux. fuel | 1 gal 3.8 L |
John Deere 630 Gasoline Engine Detail |
|
| 2-cylinder | |
| liquid-cooled | |
| Displacement | 302.9 ci 5.0 L |
| Bore/Stroke | 5.50×6.375 inches 140 x 162 mm |
| Rated RPM | 1125 |
| Firing order | 1-2 |
| Starter volts | 12 |
| Oil capacity | 8 qts 7.6 L |
| Coolant capacity | 26 qts 24.6 L |
Check here: John Deere 5020
John Deere 630 All-fuel Engine Detail |
|
| 2-cylinder | |
| liquid-cooled | |
| Displacement | 302.9 ci 5.0 L |
| Bore/Stroke | 5.50×6.375 inches 140 x 162 mm |
| Rated RPM | 1125 |
| Firing order | 1-2 |
| Starter volts | 12 |
| Oil capacity | 8 qts 7.6 L |
John Deere 630 LP gas Engine Detail |
|
| 2-cylinder | |
| liquid-cooled | |
| Displacement | 302.9 ci 5.0 L |
| Bore/Stroke | 5.50×6.375 inches 140 x 162 mm |
| Rated RPM | 1125 |
| Firing order | 1-2 |
| Starter volts | 12 |
| Oil capacity | 8 qts 7.6 L |
John Deere 630 Power |
|
| Drawbar (claimed) | 44 hp 32.8 kW |
| PTO (claimed) | 48 hp 35.8 kW |
| Plows | 4 |
| Drawbar (tested) | 44.81 hp 33.4 kW |
| Belt (tested) | 49.19 hp 36.7 kW |
Check here: John Deere 310C
John Deere 630 Mechanical |
|
| Two-wheel drive | |
| Steering | manual |
| Steering | power Opt |
| Differential mechanical drum brakes | |
| Open operator station. | |
John Deere 630 Hydraulics |
|
| Pressure | 1200 psi 82.7 bar |
| Valves | 1 or 2 |
| Pump flow | 8.9 gpm 33.7 lpm |
John Deere 630 Tractor hitch |
|
| Rear Type |
II |
John Deere 630 Power Take-off (PTO) |
|
| Rear PTO | independent |
| Rear RPM | 540 |
John Deere 630 Dimensions & Tires |
|
| Wheelbase | 90 inches 228 cm |
| Weight | 5,858 lbs 2657 kg |
| Front tire | 6.00-16 |
| Rear tire |
12.4-38 |
John Deere 630 Electrical |
|
| Ground | positive |
| Batteries | 2 |
| Battery volts | 6 |
John Deere 630 Transmission |
|
| Type | unsynchronized gear |
| Gears | 6 forward and 1 reverse |
John Deere 630 Tires |
|
| Ag front | 6.00-16 |
| Ag rear | 12.4-38 |
| Ag rear | 13.6-38 |
| 15.5-38 | |
| 11-38 | |
| 12-38 | |
John Deere 630 Dimensions |
|
| Wheelbase | 90 inches 228 cm |
| Length | 135.25 inches 343 cm |
| Width | 86.625 inches 220 cm |
| Height | 88.125 inches 223 cm |
| Shipping weight | 5,858 lbs 2657 kg |
| Front tread | 48 to 80 inches 121 to 203 cm |
| Rear tread | 58 to 88 inches 147 to 223 cm (regular axle) |
| Rear tread | 58 to 104 inches 147 to 264 cm (long axle) |
John Deere 630 Attachments
45 Loader |
| 2,000 lbs lift (full at pin) 907 kg |
| 126 inches height (at pin) 320 cm |