John Deere 4400 Specs, Weight, Price & Review ❤


John Deere 4400 Specs, Weight, Price & Review

Here in this post, I have gathered information about the John Deere 4400 from its official website, including its specifications, weight, price, and dimensions.

We believe in providing reliable information to our readers, therefore we prefer to obtain information on the John Deere 4400 from authentic sources.


This article, which has been updated, has all the information you require about the John Deere 4400.

John Deere 4400 Specs

John Deere 4400 Overview

John Deere’s 4400 is a 4WD compact utility tractor. From 1998 to 2001, John Deere made this tractor in Augusta, Georgia.


The John Deere 4400 tractor has a 1.6 L three-cylinder diesel engine and one of two transmissions: partially synchronized with 12 forward and 12 reverse gears or hydrostatic with infinite forward and reverse.


John Deere 4400’s Yanmar 3TNE88 engine. It’s a 1.6 L, 1624 cm2 (99.1 cuin) three-cylinder natural aspirated diesel engine with a 3.46-inch bore and a 3.54-inch stroke. It’s 18.0:1. This engine produced 36.2 PS at 2,700 pm.

The John Deere 4400 has power steering, differential wet disc brakes, an open operator station with two-post ROPS, and a 37.9-liter fuel tank.

John Deere 4400 price

price = $17,500.00 USD

John Deere 4400 weight

weight = 1,315 kg (2,899 lbs)

John Deere 4400 Horsepower

Horsepower = 26.6 kW; 35.7 HP

John Deere 4400 Height

Height = 2,130 mm (83.9 in)


John Deere 4400 Specs


Engine model Yanmar 3TNE88
Cylinders 3
Engine type Four-stroke, liquid-cooled, inline
Displacement 100.2 ci
1.6 L
Fuel system direct injection
Pre-heating air heat
Rated RPM 2700
Operating RPM 950-2700
Starter power 1.9 hp
1.4 kW
Power (gross) 35.7 hp
26.6 kW
Air cleaner dry
Compression 18:1
Idle RPM 950-2810
Starter volts 12
Coolant capacity 6.1 qts
5.8 L


Hydraulic system 6.3 gal
23.8 L (gear)
  6.8 gal
25.7 L (hydro)
Fuel 10 gal
37.9 L
Front axle 4.7 qts
4.4 L


Type open center
Pressure 2500 psi
172.4 bar
Pump flow 8.3 gpm
31.4 lpm
Steering flow 5 gpm
18.9 lpm
Capacity 6.3 gal
23.8 L (gear)
  6.8 gal
25.7 L (hydro)
Valves 2
Total flow 13.3 gpm
50.3 lpm
Steering flow 5 gpm
18.9 lpm


Chassis 4×4 MFWD 4WD
Steering power
Cab Two-post ROPS
Differential lock mechanical
Brakes differential wet disc
Transmissions 12-speed partially synchronized


Wheelbase 68 inches
172 cm
Width 50 inches
127 cm
Length 117 inches
297 cm
Clearance (rear axle) 13.4 inches
34 cm


Shipping: 2,900 lbs
1315 kg
Max front axle: 3,197 lbs
1450 kg
Max Drawbar: 562 lbs
254 kg
Max rear axle: 4,409 lbs
1999 kg


ROPS 84 inches
213 cm (fixed)
  90 inches
228 cm (folding)
Hood 53.3 inches
135 cm

Power Take-off (PTO)

Rear PTO independent
Rear RPM 540
Mid PTO optional
Engine RPM 2100@2700
Clutch wet disc
Engine RPM 540@2700
Mid RPM 2100

Tractor hitch

Rear lift (at 24″/610mm) 2,200 lbs
997 kg
Rear Type I

John Deere 4400 Review 

The John Deere 4400 model is a compact tractor that is well-known for its reliability, adaptability, and simplicity of use. It’s powered by a 35-horsepower Yanmar diesel engine and has a hydrostatic three-range transmission. For a full review, please check this YouTube video Here.

John Deere 4400 Serial Numbers

1998 140000
1999 240001
2000 340001
2001 440001

John Deere 4400 Attachments

  • 60″ Mower deck
  • 72″ Mower deck
  • Blade
  • 59″ Snow blower
  • John Deere 420 Loader
  • John Deere 430 Loader
  • John Deere 47 Backhoe
  • John Deere 48 Backhoe

Final Thoughts

After research, I have provided information about John Deere 4400 Specs, Weight, Price & Review in this post.

So I hope you liked this article. If you liked then share this article with your friends, family, and relatives.

And if you still feel that I have left out something in this post then you can tell me in the comment box below.

FAQs For John Deere 4400 


Q. What motor is in a John Deere 4400?

John Deere, a 4400 compact utility tractor, used the Yanmar 3TNE88 diesel engine. It is a three-cylinder, naturally aspirated, 1.6 L, 1624cm2 (99.1 cuin) diesel engine. The bore and stroke are 88.0mm (3.46in) and 90.0mm (3.54in), respectively.

Q. How much can a John Deere 4400 lift?

1,259 lbs 571 kg

Q. How many horsepower is a 4400 John Deere?

26.6 kW; 35.7 HP

Notify of

Inline Feedbacks
View all comments