Husqvarna 350 Chainsaw Specs ,Review & Prices

Husqvarna 350 Chainsaw Specs

If you want to buy Husqvarna 350 Chainsaw  but aren’t sure about Husqvarna 350 Chainsaw Specs, Weight, Price & Review, then here I have given details in this post.

We prefer you save your precious energy and time. Our team has compiled complete and step-by-step information about Husqvarna 350 Chainsaw Specs, Weight, Price & Review.

Husqvarna 350 Chainsaw

We confirmed this information with Husqvarna 350 Chainsaw representatives and associates. In this article, we’ll take a look at Husqvarna 350 Chainsaw Specs, Weight, Price and a detailed review.

Husqvarna 350 Chainsaw Overview

Husqvarna 350 Chainsaw

At first, the Husqvarna 350 Chainsaw was a wood-burning vertical plate saw with a muffler.

Each of the Husqvarna 350 Chainsaw had a shaft that was attached to the top of the motor casing and could be turned on and off with a push-button.

Once the chain drive has been muzzled, the muzzle power could be turned on and off with a crank handle.

To make the saw better at cutting, more oil or grease could be pumped through the muffler’s port. The second version didn’t have an exhaust pipe and instead had a chain-driven chain.

Instead of a crank, you had to turn a handle with your foot. The second version was powered by a chain wheel, and the same steps could be used to change the oil and exhaust.

To cut more material with the same tools, you could change how fast the chain moves.

Husqvarna 350 Chainsaw Prices

Husqvarna 350 Chainsaw

Many Husqvarna 350 models can be bought from online stores like Amazon and eBay for between $200 and $500.

Even for regular chainsaws, that’s a big price difference.

It’s cheap, and depending on how often you’ve used or seen one of these chainsaws, it might not be too hard to use.

Husqvarna 350 chainsaw manual

If you want to get the most out of your chainsaw, you need the Husqvarna 350 chainsaw manual. This is an easy-to-read guide with pictures, diagrams, and information on how to take care of it.

This manual is also a great resource for mechanics and repair shops because it explains what each Husqvarna 350 part does and how it works.

You can save it to your computer as a PDF and use it as a guide for other Husqvarna models.

The Husqvarna 350 chainsaw comes with a manual that tells you step-by-step how to put the saw’s parts together.

Never take the motor cover off the saw, because it could hurt the electric parts. When using the saw, you should always wear safety gear and never use more amperage than is recommended.

There are also safety tips in the manual, such as wearing gloves.

How to start a Husqvarna 350 chainsaw?

Turning on the engine and moving the choke lever forward is the first step in starting a Husqvarna chainsaw. You’ll have to push the button more than once.

Then, pull on the chain brake to start the saw. When it’s going, you have to hold the front handguard and your left palm.

To start the saw, you have to put the choke lever in the right spot and press it. The next step in starting a Husqvarna chainsaw is to make sure the carburetor is clean and free of any debris.

Then you can start the engine by pulling the choke lever back. Make sure to always use fresh gas and check the oil level.

It is best to use gas or oil that has just been mixed. Also, pull the handle back and make sure it doesn’t get stuck.

Then, pull the choke cord to start the chainsaw. It can also get clogged up with grease or oil. If the engine won’t start, you should take it to a Husqvarna repair center.

Also, make sure the fuel is new and in the right proportions. You can then put oil or gas in the gas tank. If the gas is new and the engine still won’t start, check to make sure the handle isn’t stuck.

Husqvarna 350 chainsaw Horsepower

The engine’s 3.1 horsepower is more than enough, and the NGK BPMR7A spark plug works better in hotter conditions.

Husqvarna 350 Chainsaw

The Husqvarna 350 chainsaw is a strong tool with a 16-inch bar and a 40-volt, 4-ah lithium-ion battery that can be used for many different tasks.

Husqvarna 350 chainsaw Maximum Power Speed

The Husqvarna 350 has a 49.4-cc engine with a 32-millimeter stroke and a 44-millimeter cylinder bore.

Husqvarna 350 Chainsaw

The most power the engine can make is at 13,000 RPM.

Husqvarna 350 chainsaw Chain Size

8TEN Chainsaw Chain for Husqvarna 350 Rancher Jonsered 18″ Bar.050 Gauge.

Husqvarna 350 Chainsaw

Husqvarna 350 chainsaw weight

The weight of a Husqvarna 350 chainsaw is 4.7 kg.

Husqvarna 350 Chainsaw

Husqvarna 350 chainsaw Specs

Model Name Husqvarna 350
Engine Type single-cylinder two-stroke
Engine Capacity 45.0cc /
Cylinder Bore 42 mm / 1.65in
Piston Stroke 32 mm / 1.28in
Ignition Type Electronic (Breakerless) magneto
Spark Plug Type NGK BPMR 7A (eBay) or Champion RCJ 7Y (eBay)
Spark Plug Gap 0.5mm, 0.02in
Carburetor Type Walbro HDA 195 (eBay)
Fuel Tank Capacity 0.5 liter
Fuel Mixture 50:1 with Husqvarna two-stroke engine oil (eBay)
Weight 4.7kg
Catalytic Converter n/a
Chain Lubrication Type Automatic oil pump
Oil Tank Capacity 0.25 liter

Husqvarna 350 Chainsaw Specs Chart

You will also find other more detailed Husqvarna model specifications by clicking on the Husqvarna links on this page

Is the Husqvarna 350 for you?

On paper, the Husqvarna model 350 chainsaw is the real deal when it comes to cutting quickly and effectively without being too big.

The chainsaw is easy to use because the engine is small and light. It also moves faster because of this.

The Husqvarna 350 chainsaw has great features like a vibration-dampening system, an automatic chain lubrication pump, and great safety features like a double-acting chain brake, a right-hand guard, and a chain catcher. All of this for a price that isn’t too high.

The Husqvarna 350 Chainsaw Engine

The 49.4-cc engine in the Husqvarna 350 chainsaw has a 32-millimeter stroke and a 44-millimeter cylinder bore.

The engine can make 13,000 RPM of power, which is a lot.

If you’re into specs or know how machines work, you’ll know that 13,000 RPM is enough to power for a core household job, like cutting down that annoying oak tree. It also has a horsepower rating of 3.1.


Husqvarna 350 Chainsaw

Husqvarna started with their ignition system, which worked well at the time. However, most people around the world agree that simpler and more effective ignition systems are now the norm.

Today, the Husqvarna 350 has the best ignition system, which is made by SEM, which has the most ignition systems on the market.

A standard NGK BPMR7A spark plug is used in the Husqvarna 350 chainsaw as well.

These spark plugs have been changed so that they can work at a higher temperature than other spark plugs. Every single one of these NGK BPMR7A spark plugs.


Husqvarna 350 Chainsaw

The Husqvarna 350 chainsaw has great fuel circulation and is well-tuned.

The chainsaw has a Zama C3-EL18 carburetor, which is made to make sure that the machine’s engines get the right mix of fuel.


Husqvarna 350 Chainsaw

Here’s the part where most people want to start.

Warranties. Everyone wants to know they’ve spent their money well, and nobody likes getting less for their money.

But the Husqvarna 350 is a totally different story.

Husqvarna 350 Chainsaw Bar length & Chain

Bar Length:

Chainsaw Bar Length Inch / CM  Chain Pitch Inch Guage Inch / MM .325″ X-Force Laminated Bar
340 / 340e /345 / 345e / 350 13/33 .325 .050/1.3
340 / 340e /345 / 345e / 350 15/38 .325 .050/1.3
340 / 340e /345 / 345e / 350 18/45 .325 .050/1.3


Chain  Type Cutter Drive Links File Kits File Size
X-Cut SP33G Pixel – Semi Chisel 56 4.8mm / 3/16″
X- Cut SP33G Pixel – Semi Chisel 64 4.8mm / 3/16″
X- Cut SP33G Pixel – Semi Chisel 72 4.8mm / 3/16″

Husqvarna 350 Chainsaw Parts Diagram

Husqvarna 350 Chainsaw

Husqvarna 350 Chainsaw

Husqvarna 350 Engine Failure Issues

There are a lot of people who didn’t do as well. Overheating is a common cause of engine failures that are so bad that they can’t be fixed.

This often happens in the first few hours of use.

This was made worse by the fact that some Husky dealers gave really bad customer service, blaming customers for the failure and saying that they had mixed the fuel wrong.

Some customers will always be like this. When it comes to two-stroke fuel mixture, there will always be people who think they know more than the manufacturer.

Even though it’s unlikely that all of them broke down because of bad mixture, it’s clear that the Husqvarna 350 has some design flaws that could cause the engine to overheat and break down.

When you look at how the engine is put together, you can see how simple it is.

It has a light, unlined cylinder and a single piston ring, which is great for getting a low-mass engine but is a recipe for early failure.

Husqvarna 350 Exhaust Muffler Issues

A very common complaint is that the exhaust muffler just falls off when it shakes loose. Customers put the muffler back on and tighten the bolts again.

The muffler falls off again, so the customer tightens the bolts even more. The cycle keeps going until the screw thread in the cylinder body is stripped and the machine is almost useless.

It does make you wonder if the two things have anything to do with each other.

As the muffler gets loose, the exhaust port is exposed directly to the air. Does this change the way the fuel is mixed, making it burn hot and lean? Maybe!

Preventing or Repairing the Husqvarna 350 Muffler Problem

If you’ve been lucky and your Husqvarna 350 hasn’t had the exhaust silencer problem yet, now is the time to take precautions.

You might be able to avoid this common problem and keep your machine running for many more years.

If the bolt threads on the muffler are still in good shape, you can easily install an aftermarket muffler support bracket (listed below), as shown in this very helpful video.

It’s important to only tighten the muffler bolts to 8-10Nm when putting them back on.

Then, run the saw for at least a minute to warm up the cylinder and muffler, and then tighten the silencer bolts to 8-10Nm again.

If you were really unlucky and stripped the bolt holes in the cylinder body, you can fix it by drilling out the stripped bolt holes and putting in 5mm thread repair inserts.

This is a cheap fix if you know how to do it yourself, but if you take it to a shop, it could cost half as much as a new saw.

Muffler Repair Ebay Parts

Husqvarna 350 Chainsaw

Exhaust Muffler Bracket

Husqvarna 350 Chainsaw

5mm Thread Repair Insert

Husqvarna 350 chainsaw

The Husqvarna 350 is an all-purpose chainsaw that is lightweight and perfect for various tasks such as felling trees, cutting firewood, and limbing.

It is equipped with a 3.1 cubic inch (52cc) two-stroke engine that generates 3.2 horsepower, and it comes with an 18-inch guide bar and chain. For a full review, please check this YouTube video Here.


Positive Comments About Husqvarna 350

  • After 12 years of use, it’s still going strong.
  • This Husqvarna chainsaw is definitely made on the cheap, but it has good power for the price.
  • This chainsaw is great, and I would recommend it for home or semi-professional use.

Negative Comments About Husqvarna 350

  • Piston and cylinder burned up after less than 10 hours of use. As instructed, 50:1 pre-mix was used.
  • The exhaust muffler has come off the cylinder body three times.
  • The silencer on the exhaust came loose and almost caused the cylinder case to melt through.
  • If you take off the cover while the chain brake lever is in use, you won’t be able to reset it.

Husqvarna 350 Manuals

Husqvarna 350 Chainsaw Workshop Manual
Husqvarna 350 Chainsaw Operators Manual

Replacement Parts on Ebay

Husqvarna 350 Chainsaw Cylinder and Piston Kit
Husqvarna 350 Chainsaw Carburetors
Husqvarna 350 Chainsaw Air Filters
Husqvarna 350 Chainsaw Ignition Module
Husqvarna 350 Chainsaw NGK BPMR7A Spark Plug
Husqvarna 350 Chainsaw Champion RCJ7Y Spark Plug

Social Media handles

Facebook: handpowertoolslist
Pinterest:  handpowertools

Final Word

All the information about the Husqvarna 350 chainsaw Price, Specs, Review, and Features have been given. I hope you enjoy this article and find it very helpful.

But if you have any problems with this Husqvarna 350, feel free to leave a comment and I will help you as soon as I can. Thanks

Husqvarna 350 Chainsaw – FAQ

Husqvarna 350 Chainsaw

How much does a Husqvarna 350 chainsaw weigh?

Small-sized. We’ve already talked about how the Husqvarna 350’s best feature is that it’s small. For a chainsaw with a 45cc engine and a weight of 4.7kg, it is pretty light.

Because of how heavy it is and how well it cuts, this tool is great and can be used for a wide range of tasks.

How many cc is a 350 Husqvarna?

The Husqvarna 350’s 50 CC engine can make up to 3.1 horsepower. The two-stroke engine can run at a speed of 2,700 rpm at idle and 9,000 rpm at its fastest.

What is the Husqvarna 350 Chainsaw Engine size?

45 CC is the size of the chainsaw’s engine.

How much Horsepower is a Husqvarna 350?

single-cylinder engines that are 350 cc and make 45 horsepower.

How much does a Husqvarna 350 cost?

$10,099. an MX bike with a four-stroke engine that is between 250 and 450 cc.

What chain does a Husqvarna 350 use?

The chain on a Husqvarna 350 is 325 Pitch 72DL.

Where are Husqvarna parts made?

Husqvarna makes most of its products in Sweden and other Scandinavian countries. They also have offices all over France and Germany.

How do I know what size my chain is?

The type of chainsaw blade you want will depend on the size of your chain pitch. The height of the cutting teeth increases with the rise. Because of this, the teeth are higher the bigger the file is.

This article I have created to give you complete information about the Husqvarna 350 Chainsaw Specs, Price with its Review.

Check out the given details which help you to know about the Husqvarna 350 Chainsaw Specs, Price with its Review.

For more information visit our website: Tractorsinfo.Com.

Notify of

Inline Feedbacks
View all comments