John Deere 7R Series 2024 Tractors Price, Specs & Reviews
John Deere 7R Serie Tractors Price, Specs, Reviews, Features, Images, Overview
The John Deere 7R Series Row Crop Tractors has the raw power and intelligence to take your farming operation to the next level, increasing productivity while producing an excellent running economy.
Story continues below advertisement
With a range of engine horsepower from 210 to 310 engine hp, these tractors are ready to show themselves day in and day out, without compromise.
So here in this article, you can get the John Deere 7R series Row crop tractors each single model information in detail like price, full technical specifications, key facts, and images.
Story continues below advertisement
John Deere 7210R Row Crop Tractors
John Deere 7210R Tractor Price
- $220,000 USD
John Deere 7210R Tractor Key Facts
- PTO power 170 hp
- Engine power 210 hp
- John Deere PowerTech™ 6.8L PVS
- Choice of CommandQuad, e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
- MFWD, or Triple Link Suspension Plus (TLS™)
- Hydraulic Capacity Up to 59 U.S. gpm (223 L/min)
- Hitch-Lift Capacity Up to 15,200 lb. (6,895 kg)
- Drawbar Capacity Up to 10,000 lb. (4,536 kg)
John Deere 7210R Tractor Specifications
| POWER | |
| Rated PTO power (hp SAE) at rated engine speed (2100 erpm)* | 170 hp (126.8 kW) |
| Rated engine PS (hp ISO) per 97/68/EC at 2,100 engine rpm** | 210 hp (154.5 kW) |
| Maximum engine power PS (hp ISO) per 97/68/EC at 1,900 engine rpm** | 231 hp (169.9 kW) |
| Intelligent Power Management (available) | Available: 30 additional engine horsepower (22 kW) at 2,100 rpm (rated speed) |
| PTO torque rise | 40% |
| PTO torque rise | 10% |
| ENGINE | |
| Description | John Deere PowerTech PSS 6.8L Engine: B20 Diesel Compatible, in-line, 6-cylinder, wet-sleeve with 4 valves-in-head |
| Rated speed | 2,100 rpm |
| Aspiration (US EPA Tier4/EU Stage IV) | Dual turbochargers, variable geometry turbo with fixed geometry turbo in series |
| Filter, engine air | Dual stage |
| Displacement | 415 cu. in. (6.8 L) |
| Bore and stroke | 4.19 in. (106 mm) x 5 in. (127 mm) |
| Compression ratio | 17.2:1 |
| Lubrication | Full-pressure, full-flow filtration with bypass |
| Filter, oil | Spin-on canister oil filter |
| FUEL SYSTEM | |
| Description | Electronically controlled, high-pressure common rail with electric fuel transfer pump (self-priming) |
| Filter system | Two-stage with water separator and service-indicator light |
| Filter, primary | 10-micron replaceable cartridge with water indication sensor and drain |
| Filter, Secondary | 2-micron spin-on element |
| Fuel-tank capacity CQT, G47/48 | 503L (133 gal) |
| Fuel-tank capacity PST, G47/48 | 475L (125 gal) |
| Fuel-tank capacity IVT, G47/48 | 520L (137 gal.) |
| Fuel-tank capacity PST, G49 | — |
| Fuel-tank capacity IVT, G49 | — |
| DEF Tank Capacity | 23L (6 gal) |
| Required fuel type | Ultralow sulfur diesel (B20 diesel compatible) |
| TRANSMISSIONS | |
| 20-speed CommandQuad, 26 mph (40 km/h) | Available (40 km/h at 1,567 rpm with group 47 tires, 40 km/h at 1,501 rpm with group 48 tires) |
| 20-speed CommandQuad, 31 mph (50 km/h) | Available (50 km/h at 1,865 rpm with group 47 tires, 50 km/h at 1,770 rpm with group 48 tires) |
| e23 Transmission 40K, 26 mph (40 km/h) | Standard (40 km/h at 1,683 rpm with group 47 tires, 40 km/h at 1,598 rpm with group 48 tires) |
| e23 Transmission 50K, 31 mph (50 km/h) | Available (50 km/h at 2,004 rpm with group 47 tires, 50 km/h at 1,902 rpm with group 48 tires) |
| john Deere Infinitely Variable Transmission (IVT), 26 mph (40 km/h) | Available |
| John Deere Infinitely Variable Transmission (IVT), 31 mph (50 km/h) | Available |
| ELECTRICAL SYSTEM | |
| Description | Two batteries in paralle |
| Alternator/battery | Standard: 200 amps/12 Volt Available: 240 amps/12 Volt |
| Total cold-cranking amps | 1850 (2-925CCA grp 31 batteries |
| FINAL DRIVES | |
| Description | Inboard planetary, three pinion |
| REAR AXLE | |
| 3.94 x 100.4 in. (100 x 2550 mm) diameter | Available |
| 3.94 x 110.5 in. (100 x 2808 mm) diameter | Available |
| 3.94 x 118.5 in. (100 x 3012 mm) diameter | Available |
| 4.33 x 100.4 in. (110 x 2550 mm) diameter | — |
| 4.33 x 118.5 in. (110 x 3012 mm) diameter | — |
| 4.72 x 100.4 in. (120 x 2550 mm) diameter | — |
| 4.72 x 118.5 in. (120 x 3012 mm) diameter | — |
| REAR-WHEEL EQUIPMENT | |
| Tires | Group 47/48 tires available as Singles/Duals |
| FRONT AXLE | |
| 1150 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm) | Standard |
| 1300 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm) | — |
| Triple Link Suspension Plus (TLS), tread range 60 to 88 in. (1524 to 2235 mm) | Available |
| Triple Link Suspension Plus (TLS), with front brakes, available with 40 km/h transmissions (standard with 50 km/h transmissions) | Available |
| DIFFERENTIAL LOCK | |
| Front axle, 1150 Series MFWD | Limited slip |
| Front axle, 1300 Series MFWD | — |
| Front axle, TLS Plus | Limited slip |
| Front axle, TLS Plus with front brakes | Full-locking electrohydraulic (actuated at the same time as rear diff-lock) |
| Rear axle | Full-locking electrohydraulic |
| STEERING | |
| Hydrostatic power steering | Standard: Load Sensing, Hydrostatic, Flow Metering with a 406mm diameter steering wheel |
| ActiveCommand Steering (ACS) with electric pump back-up | Available: Variable ratio 15:1 to 23:1 (3.1-5.0 turns lock to lock) w/Stability Augmentation and passive tactile feedback-345mm diameter steering wheel |
| HYDRAULIC SYSTEM | |
| Description | Closed-center, pressure, and flow compensated |
| Selective control valves (SCVs) | 3, 4 Standard, 5, and 6 Available |
| Main pump, axial piston (displacement) | 63 cc standard 45 and 85 cc available |
| Maximum pressure | 2,958.1 psi (20 400 kPa) +/- 4.4 psi (300 kPa) |
| Rated flow, 45 cc pump | 32 U.S. gpm (121.1 L/min) |
| Rated flow, 63 cc pump | 43 U.S. gpm (162 L/min) |
| Rated flow, 85 cc pump | 59 U.S. gpm (223.3 L/min) |
| Available flow at a single rear SCV | 35 U.S. gpm (132 L/min) |
| Available flow at a single front SCV | 33 U.S. gpm (126 L/min |
| 3-POINT HITCH, REAR | |
| Description | Electrohydraulic sensing |
| Category 3/3N with Quik-Coupler | Standard: 12,000 lb. (5,443 kg) 7,300 kg max lift Available: 15,200 lb. (6,895 kg) 9,208 kg max lift |
| Category 3N/3 with Quik-Coupler | — |
| 3-POINT HITCH, FRONT | |
| Description | Category 3N, available Premium Front Hitch for use with ground-engaging front implements |
| Standard lift capacity | 11,464 lb. (5200 kg) |
| DRAWBAR | |
| Category 3, 4,050 lb. (1837 kg) – 6,000 lb. (2700 kg) maximum vertical load dependent on drawbar position | Standard |
| Category 3 HD with high capacity 10,000 lb. (4536 kg) maximum vertical load | Available |
| POWER TAKE-OFF (PTO)* , REAR, INDEPENDENT | |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm | Standard |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm; capable of 1 3/8 in. (35 mm) 540/1000 rpm gearcase | Available |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm; capable of 1 3/8 in. (35 mm) 540E/1000/1000E rpm gearcase | Available |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm with 1 3/8 in. (35 mm) 540/540E/1000 rpm gearcase | Available |
| PTO speed at engine rpm | 540/1,000 at 1,950 engine rpm; 540E/1,000E PTO at 1,750 engine rpm |
| POWER TAKE-OFF (PTO)* , FRONT, INDEPENDENT | |
| 1 3/8 in. (35 mm) 21-spline, 1,000 rpm | Available; Counter Clockwise Rotation (when facing Front PTO) |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm | Available; Counter Clockwise Rotation (when facing Front PTO) |
| PTO Power (SAE hp) | 175 hp (130 kW) maximum output |
| PTO Speed at engine RPM (1:2 ratio) | 1,000 PTO rpm at 1,940E rpm |
| WHEELBASE | |
| MFWD/TLS | 115.2 in. (2925 mm) |
| MFWD / TLS axle clearance – 1300 axle, G43 420/85R34 tires | 19.5 in. (495mm) |
| INTEGRATED TECHNOLOGY | |
| AutoTrac Ready | Standard |
| JDLink™ | Available JDLink™ Connect and Ethernet Harnesses† |
| Service ADVISOR™ Remote | Capable with JDLink™ Select & Ultimate |
| CommandCenter™ 7-inch Display video with 4100 Processor | Video capable; single video input (Tyco Connector PN 776536-1) for camera with PAL or NTSC signal (camera and extension harness available through John Deere Parts) |
| CommandCenter™ 10-inch Display video with 4600 Processor | Available |
| Factory-installed GreenStar™ 3 2630 Display | Available |
| AVERAGE STANDARD WEIGHT (less front weights) | |
| MFWD*** | 23,175 lb (10,512 kg) |
| TLS†† | 25,521 lb (11,576 kg) |
John Deere 7230R Row Crop Tractors
John Deere 7230R Tractor Price
- $223,189 USD
John Deere 7230R Tractor Key Facts
- PTO power 189 hp
- Engine power 230 hp
- John Deere PowerTech™ 6.8L PSS
- Choice of CommandQuad, e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
- MFWD, or Triple Link Suspension Plus (TLS™)
- Hydraulic Capacity Up to 59 U.S. gpm (223 L/min)
- Hitch-Lift Capacity Up to 15,200 lb. (6,895 kg)
- Drawbar Capacity Up to 10,000 lb. (4,536 kg)
John Deere 7230R Tractor Specifications
| POWER | |
| Rated PTO power (hp SAE) at rated engine speed (2100 erpm)* | 189 hp (140.9 kW) |
| Rated engine PS (hp ISO) per 97/68/EC at 2,100 engine rpm** | 230 hp (169.2 kW) |
| Maximum engine power PS (hp ISO) per 97/68/EC at 1,900 engine rpm** | 253 hp (186.1 kW) |
| Intelligent Power Management (available) | Available: 30 additional engine horsepower (22 kW) at 2,100 rpm (rated speed) |
| PTO torque rise | 40% |
| PTO torque rise | 10% |
| ENGINE | |
| Description | John Deere PowerTech PSS 6.8L Engine: B20 Diesel Compatible, in-line, 6-cylinder, wet-sleeve with 4 valves-in-head |
| Rated speed | 2,100 rpm |
| Aspiration (US EPA Tier4/EU Stage IV) | Dual turbochargers, variable geometry turbo with fixed geometry turbo in series |
| Filter, engine air | Dual stage |
| Displacement | 415 cu. in. (6.8 L) |
| Bore and stroke | 4.19 in. (106 mm) x 5 in. (127 mm) |
| Compression ratio | 16.0:1 |
| Lubrication | Full-pressure, full-flow filtration with bypass |
| Filter, oil | Spin-on canister oil filter |
| FUEL SYSTEM | |
| Description | Electronically controlled, high-pressure common-rail with electric fuel transfer pump (self priming) |
| Filter system | Two-stage with water separator and service-indicator light |
| Filter, primary | 10 micron replaceable cartridge with water indication sensor and drain |
| Filter, secondary | 2 micron spin-on element |
| Fuel-tank capacity CQT, G47/48 | 503L (133 gal) |
| Fuel-tank capacity PST, G47/48 | 475L (125 gal) |
| Fuel-tank capacity IVT, G47/48 | 520L (137 gal.) |
| Fuel-tank capacity PST, G49 | — |
| Fuel-tank capacity IVT, G49 | — |
| DEF Tank Capacity | 23L (6 gal) |
| Required fuel type | Ultralow sulfur diesel (B20 diesel compatible) |
| TRANSMISSIONS | |
| 20-speed CommandQuad, 26 mph (40 km/h) | Available (40 km/h at 1,567 rpm with group 47 tires, 40 km/h at 1,501 rpm with group 48 tires) |
| 20-speed CommandQuad, 31 mph (50 km/h) | Available (50 km/h at 1,865 rpm with group 47 tires, 50 km/h at 1,770 rpm with group 48 tires) |
| e23 Transmission 40K, 26 mph (40 km/h) | Standard (40 km/h at 1,683 rpm with group 47 tires, 40 km/h at 1,598 rpm with group 48 tires) |
| e23 Transmission 50K, 31 mph (50 km/h) | Available (50 km/h at 2,004 rpm with group 47 tires, 50 km/h at 1,902 rpm with group 48 tires) |
| john Deere Infinitely Variable Transmission (IVT), 26 mph (40 km/h) | Available |
| John Deere Infinitely Variable Transmission (IVT), 31 mph (50 km/h) | Available |
| ELECTRICAL SYSTEM | |
| Description | Two batteries in paralle |
| Alternator/battery | Standard: 200 amps/12 Volt Available: 240 amps/12 Volt |
| Total cold-cranking amps | 1850 (2-925CCA grp 31 batteries |
| FINAL DRIVES | |
| Description | Inboard planetary, three pinion |
| REAR AXLE | |
| 3.94 x 100.4 in. (100 x 2550 mm) diameter | Available |
| 3.94 x 110.5 in. (100 x 2808 mm) diameter | Available |
| 3.94 x 118.5 in. (100 x 3012 mm) diameter | Available |
| 4.33 x 100.4 in. (110 x 2550 mm) diameter | — |
| 4.33 x 118.5 in. (110 x 3012 mm) diameter | — |
| 4.72 x 100.4 in. (120 x 2550 mm) diameter | — |
| 4.72 x 118.5 in. (120 x 3012 mm) diameter | — |
| REAR-WHEEL EQUIPMENT | |
| Tires | Group 47/48 tires available as Singles/Duals |
| FRONT AXLE | |
| 1150 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm) | Standard |
| 1300 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm) | — |
| Triple Link Suspension Plus (TLS), tread range 60 to 88 in. (1524 to 2235 mm) | Available |
| Triple Link Suspension Plus (TLS), with front brakes, available with 40 km/h transmissions (standard with 50 km/h transmissions) | Available |
| DIFFERENTIAL LOCK | |
| Front axle, 1150 Series MFWD | Limited slip |
| Front axle, 1300 Series MFWD | — |
| Front axle, TLS Plus | Limited slip |
| Front axle, TLS Plus with front brakes | Full-locking electrohydraulic (actuated at same time as rear diff-lock) |
| Rear axle | Full-locking electrohydraulic |
| STEERING | |
| Hydrostatic power steering | Standard: Load Sensing, Hydrostatic, Flow Metering with a 406mm diameter steering wheel |
| ActiveCommand Steering (ACS) with electric pump back-up | Available: Variable ratio 15:1 to 23:1 (3.1-5.0 turns lock to lock) w/Stability Augmentation and passive tactile feedback-345mm diameter steering wheel |
| HYDRAULIC SYSTEM | |
| Description | Closed-center, pressure and flow compensated |
| Selective control valves (SCVs) | 3, 4 Standard, 5 and 6 Available |
| Main pump, axial piston (displacement) | 63 cc standard 45 and 85 cc available |
| Maximum pressure | 2,958.1 psi (20 400 kPa) +/- 4.4 psi (300 kPa) |
| Rated flow, 45 cc pump | 32 U.S. gpm (121.1 L/min) |
| Rated flow, 63 cc pump | 43 U.S. gpm (162 L/min) |
| Rated flow, 85 cc pump | 59 U.S. gpm (223.3 L/min) |
| Available flow at a single rear SCV | 35 U.S. gpm (132 L/min) |
| Available flow at a single front SCV | 33 U.S. gpm (126 L/min |
| 3-POINT HITCH, REAR | |
| Description | Electrohydraulic sensing |
| Category 3/3N with Quik-Coupler | Standard: 12,000 lb. (5,443 kg) 7,300 kg max lift Available: 15,200 lb. (6,895 kg) 9,208 kg max lift |
| Category 3N/3 with Quik-Coupler | — |
| 3-POINT HITCH, FRONT | |
| Description | Category 3N, available Premium Front Hitch for use with ground-engaging front implements |
| Standard lift capacity | 11,464 lb. (5200 kg) |
| DRAWBAR | |
| Category 3, 4,050 lb. (1837 kg) – 6,000 lb. (2700 kg) maximum vertical load dependent on drawbar position | Standard |
| Category 3 HD with high capacity 10,000 lb. (4536 kg) maximum vertical load | Available |
| POWER TAKE-OFF (PTO)* , REAR, INDEPENDENT | |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm | Standard |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm; capable of 1 3/8 in. (35 mm) 540/1000 rpm gearcase | Available |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm; capable of 1 3/8 in. (35 mm) 540E/1000/1000E rpm gearcase | Available |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm with 1 3/8 in. (35 mm) 540/540E/1000 rpm gearcase | Available |
| PTO speed at engine rpm | 540/1,000 at 1,950 engine rpm; 540E/1,000E PTO at 1,750 engine rpm |
| POWER TAKE-OFF (PTO)* , FRONT, INDEPENDENT | |
| 1 3/8 in. (35 mm) 21-spline, 1,000 rpm | Available; Counter Clockwise Rotation (when facing Front PTO) |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm | Available; Counter Clockwise Rotation (when facing Front PTO) |
| PTO Power (SAE hp) | 175 hp (130 kW) maximum output |
| PTO Speed at engine RPM (1:2 ratio) | 1,000 PTO rpm at 1,940E rpm |
| WHEELBASE | |
| MFWD/TLS | 115.2 in. (2925 mm) |
| MFWD / TLS axle clearance – 1300 axle, G43 420/85R34 tires | 19.5 in. (495mm) |
| INTEGRATED TECHNOLOGY | |
| AutoTrac Ready | Standard |
| JDLink™ | Available JDLink™ Connect and Ethernet Harnesses† |
| Service ADVISOR™ Remote | Capable with JDLink™ Select & Ultimate |
| CommandCenter™ 7-inch Display video with 4100 Processor | Video capable; single video input (Tyco Connector PN 776536-1) for camera with PAL or NTSC signal (camera and extension harness available through John Deere Parts) |
| CommandCenter™ 10-inch Display video with 4600 Processor | Available |
| Factory-installed GreenStar™ 3 2630 Display | Available |
| AVERAGE STANDARD WEIGHT (less front weights) | |
| MFWD*** | 23,175 lb (10,512 kg) |
| TLS†† | 25,521 lb (11,576 kg) |
John Deere 7250R Row Crop Tractors
Story continues below advertisement
John Deere 7250R Tractor Price
- $239,975 USD
John Deere 7250R Tractor Key Facts
- PTO power 205 hp
- Engine power 250 hp
- John Deere PowerTech™ 6.8L PSS
- Choice of e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
- MFWD, or Triple Link Suspension Plus (TLS™)
- Hydraulic Capacity Up to 59 U.S. gpm (223 L/min)
- Hitch-Lift Capacity Up to 17,300 lb. (7,847 kg)
- Drawbar Capacity Up to 10,000 lb. (4,536 kg)
John Deere 7250R Tractor Specifications
| POWER | |
| Rated PTO power (hp SAE) at rated engine speed (2100 erpm)* | 205 hp (152.9 kW) |
| Rated engine PS (hp ISO) per 97/68/EC at 2,100 engine rpm** | 250 hp (183.9 kW) |
| Maximum engine power PS (hp ISO) per 97/68/EC at 1,900 engine rpm** | 275 hp (202.3 kW) |
| Intelligent Power Management (available) | Available: 30 additional engine horsepower (22 kW) at 2,100 rpm (rated speed) |
| PTO torque rise | 40% |
| PTO torque rise | 10% |
| ENGINE | |
| Description | John Deere PowerTech PSS 6.8L Engine: B20 Diesel Compatible, in-line, 6-cylinder, wet-sleeve with 4 valves-in-head |
| Rated speed | 2,100 rpm |
| Aspiration (US EPA Tier4/EU Stage IV) | Dual turbochargers, variable geometry turbo with fixed geometry turbo in series |
| Filter, engine air | Dual stage |
| Displacement | 415 cu. in. (6.8 L) |
| Bore and stroke | 4.19 in. (106 mm) x 5 in. (127 mm) |
| Compression ratio | 16.0:1 |
| Lubrication | Full-pressure, full-flow filtration with bypass |
| Filter, oil | Spin-on canister oil filter |
| FUEL SYSTEM | |
| Description | Electronically controlled, high-pressure common-rail with electric fuel transfer pump (self priming) |
| Filter system | Two-stage with water separator and service-indicator light |
| Filter, primary | 10 micron replaceable cartridge with water indication sensor and drain |
| Filter, secondary | 2 micron spin-on element |
| Fuel-tank capacity CQT, G47/48 | 503L (133 gal) |
| Fuel-tank capacity PST, G47/48 | 475L (125 gal) |
| Fuel-tank capacity IVT, G47/48 | 520L (137 gal.) |
| Fuel-tank capacity PST, G49 | 497L (131 gal) |
| Fuel-tank capacity IVT, G49 | 543L (143 gal) |
| DEF Tank Capacity | 23L (6 gal) |
| Required fuel type | Ultralow sulfur diesel (B20 diesel compatible) |
| TRANSMISSIONS | |
| 20-speed CommandQuad, 26 mph (40 km/h) | — |
| 20-speed CommandQuad, 31 mph (50 km/h) | — |
| e23 Transmission 40K, 26 mph (40 km/h) | Standard (40 km/h at 1,683 rpm with group 47 tires, 40 km/h at 1,598 rpm with group 48 tires, 40km/h at 1,515 rpm with group 49 tires) |
| e23 Transmission 50K, 31 mph (50 km/h) | Available (50 km/h at 2,004 rpm with group 47 tires, 50 km/h at 1,902 rpm with group 48 tires, 50 km/h at 1,804 rpm with group 49 tires) |
| john Deere Infinitely Variable Transmission (IVT), 26 mph (40 km/h) | Available |
| John Deere Infinitely Variable Transmission (IVT), 31 mph (50 km/h) | Available |
| ELECTRICAL SYSTEM | |
| Description | Two batteries in paralle |
| Alternator/battery | Standard: 200 amps/12 Volt Available: 240 amps/12 Volt |
| Total cold-cranking amps | 1850 (2-925CCA grp 31 batteries |
| FINAL DRIVES | |
| Description | Inboard planetary, three pinion |
| REAR AXLE | |
| 3.94 x 100.4 in. (100 x 2550 mm) diameter | — |
| 3.94 x 110.5 in. (100 x 2808 mm) diameter | — |
| 3.94 x 118.5 in. (100 x 3012 mm) diameter | — |
| 4.33 x 100.4 in. (110 x 2550 mm) diameter | Available |
| 4.33 x 118.5 in. (110 x 3012 mm) diameter | Available |
| 4.72 x 100.4 in. (120 x 2550 mm) diameter | Available |
| 4.72 x 118.5 in. (120 x 3012 mm) diameter | Available |
| REAR-WHEEL EQUIPMENT | |
| Tires | Group 47/48/49 tires available as Singles/Duals |
| FRONT AXLE | |
| 1150 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm) | — |
| 1300 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm) | Standard |
| Triple Link Suspension Plus (TLS), tread range 60 to 88 in. (1524 to 2235 mm) | Available |
| Triple Link Suspension Plus (TLS), with front brakes, available with 40 km/h transmissions (standard with 50 km/h transmissions) | Available |
| DIFFERENTIAL LOCK | |
| Front axle, 1150 Series MFWD | Limited slip |
| Front axle, 1300 Series MFWD | — |
| Front axle, TLS Plus | Limited slip |
| Front axle, TLS Plus with front brakes | Full-locking electrohydraulic (actuated at same time as rear diff-lock) |
| Rear axle | Full-locking electrohydraulic |
| STEERING | |
| Hydrostatic power steering | Standard: Load Sensing, Hydrostatic, Flow Metering with a 406mm diameter steering wheel |
| ActiveCommand Steering (ACS) with electric pump back-up | Available: Variable ratio 15:1 to 23:1 (3.1-5.0 turns lock to lock) w/Stability Augmentation and passive tactile feedback-345mm diameter steering wheel |
| HYDRAULIC SYSTEM | |
| Description | Closed-center, pressure and flow compensated |
| Selective control valves (SCVs) | 3, 4 Standard, 5 and 6 Available |
| Main pump, axial piston (displacement) | 63 cc standard 85 cc available |
| Maximum pressure | 2,958.1 psi (20 400 kPa) +/- 4.4 psi (300 kPa) |
| Rated flow, 45 cc pump | — |
| Rated flow, 63 cc pump | 43 U.S. gpm (162 L/min) |
| Rated flow, 85 cc pump | 59 U.S. gpm (223.3 L/min) |
| Available flow at a single rear SCV | 35 U.S. gpm (132 L/min) |
| Available flow at a single front SCV | 33 U.S. gpm (126 L/min |
| 3-POINT HITCH, REAR | |
| Description | Electrohydraulic sensing |
| Category 3/3N with Quik-Coupler | — Standard: 15,200 lb. (6,895 kg) 9,208 kg max lift |
| Category 3N/3 with Quik-Coupler | Standard: 15,200 lb. (6,895 kg) 9,208 kg max lift Available: 17,300 lb. (7,847 kg) 1,0206 kg max lift |
| 3-POINT HITCH, FRONT | |
| Description | Category 3N, available Premium Front Hitch for use with ground-engaging front implements |
| Standard lift capacity | 11,464 lb. (5200 kg) |
| DRAWBAR | |
| Category 3, 4,050 lb. (1837 kg) – 6,000 lb. (2700 kg) maximum vertical load dependent on drawbar position | Standard |
| Category 3 HD with high capacity 10,000 lb. (4536 kg) maximum vertical load | Available |
| POWER TAKE-OFF (PTO)* , REAR, INDEPENDENT | |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm | Standard |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm; capable of 1 3/8 in. (35 mm) 540/1000 rpm gearcase | Available |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm; capable of 1 3/8 in. (35 mm) 540E/1000/1000E rpm gearcase | Available |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm with 1 3/8 in. (35 mm) 540/540E/1000 rpm gearcase | Available |
| PTO speed at engine rpm | 540/1,000 at 1,950 engine rpm; 540E/1,000E PTO at 1,750 engine rpm |
| POWER TAKE-OFF (PTO)* , FRONT, INDEPENDENT | |
| 1 3/8 in. (35 mm) 21-spline, 1,000 rpm | Available; Counter Clockwise Rotation (when facing Front PTO) |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm | Available; Counter Clockwise Rotation (when facing Front PTO) |
| PTO Power (SAE hp) | 175 hp (130 kW) maximum output |
| PTO Speed at engine RPM (1:2 ratio) | 1,000 PTO rpm at 1,940E rpm |
| WHEELBASE | |
| MFWD/TLS | 115.2 in. (2925 mm) |
| MFWD / TLS axle clearance – 1300 axle, G43 420/85R34 tires | 19.5 in. (495mm) |
| INTEGRATED TECHNOLOGY | |
| AutoTrac Ready | Standard |
| JDLink™ | Available JDLink™ Connect and Ethernet Harnesses† |
| Service ADVISOR™ Remote | Capable with JDLink™ Select & Ultimate |
| CommandCenter™ 7-inch Display video with 4100 Processor | —– |
| CommandCenter™ 10-inch Display video with 4600 Processor | Video capable; four video inputs (Tyco Connector PN 776536-1) for camera with PAL or NTSC signal (camera and extension harness available through John Deere Parts |
| Factory-installed GreenStar™ 3 2630 Display | Available |
| AVERAGE STANDARD WEIGHT (less front weights) | |
| MFWD*** | — |
| TLS†† | 25,738 lb (11,674 kg) |
John Deere 7270R Row Crop Tractors
John Deere 7270R Tractor Price
- $245,000 USD
John Deere 7270R Tractor Key Facts
- PTO power 224 hp
- Engine power 270 hp
- John Deere PowerTech™ 6.8L PSS
- Choice of e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
- MFWD, or Triple Link Suspension Plus (TLS™)
John Deere 7270R Tractor Specifications
| POWER | |
| Rated PTO power (hp SAE) at rated engine speed (2100 erpm)* | 224 hp (167 kW) |
| Rated engine PS (hp ISO) per 97/68/EC at 2,100 engine rpm** | 270 hp (198.6 kW) |
| Maximum engine power PS (hp ISO) per 97/68/EC at 1,900 engine rpm** | 297 hp (218.4 kW) |
| Intelligent Power Management (available) | Available: 30 additional engine horsepower (22 kW) at 2,100 rpm (rated speed) |
| PTO torque rise | 38% |
| PTO torque rise | 10% |
| ENGINE | |
| Description | John Deere PowerTech PSS 6.8L Engine: B20 Diesel Compatible, in-line, 6-cylinder, wet-sleeve with 4 valves-in-head |
| Rated speed | 2,100 rpm |
| Aspiration (US EPA Tier4/EU Stage IV) | Dual turbochargers, variable geometry turbo with fixed geometry turbo in series |
| Filter, engine air | Dual stage |
| Displacement | 415 cu. in. (6.8 L) |
| Bore and stroke | 4.19 in. (106 mm) x 5 in. (127 mm) |
| Compression ratio | 16.0:1 |
| Lubrication | Full-pressure, full-flow filtration with bypass |
| Filter, oil | Spin-on canister oil filter |
| FUEL SYSTEM | |
| Description | Electronically controlled, high-pressure common-rail with electric fuel transfer pump (self priming) |
| Filter system | Two-stage with water separator and service-indicator light |
| Filter, primary | 10 micron replaceable cartridge with water indication sensor and drain |
| Filter, secondary | 2 micron spin-on element |
| Fuel-tank capacity CQT, G47/48 | 503L (133 gal) |
| Fuel-tank capacity PST, G47/48 | 475L (125 gal) |
| Fuel-tank capacity IVT, G47/48 | 520L (137 gal.) |
| Fuel-tank capacity PST, G49 | 497L (131 gal) |
| Fuel-tank capacity IVT, G49 | 543L (143 gal) |
| DEF Tank Capacity | 23L (6 gal) |
| Required fuel type | Ultralow sulfur diesel (B20 diesel compatible) |
| TRANSMISSIONS | |
| 20-speed CommandQuad, 26 mph (40 km/h) | — |
| 20-speed CommandQuad, 31 mph (50 km/h) | — |
| e23 Transmission 40K, 26 mph (40 km/h) | Standard (40 km/h at 1,683 rpm with group 47 tires, 40 km/h at 1,598 rpm with group 48 tires, 40km/h at 1,515 rpm with group 49 tires) |
| e23 Transmission 50K, 31 mph (50 km/h) | Available (50 km/h at 2,004 rpm with group 47 tires, 50 km/h at 1,902 rpm with group 48 tires, 50 km/h at 1,804 rpm with group 49 tires) |
| john Deere Infinitely Variable Transmission (IVT), 26 mph (40 km/h) | Available |
| John Deere Infinitely Variable Transmission (IVT), 31 mph (50 km/h) | Available |
| ELECTRICAL SYSTEM | |
| Description | Two batteries in paralle |
| Alternator/battery | Standard: 200 amps/12 Volt Available: 240 amps/12 Volt |
| Total cold-cranking amps | 1850 (2-925CCA grp 31 batteries |
| FINAL DRIVES | |
| Description | Inboard planetary, three pinion |
| REAR AXLE | |
| 3.94 x 100.4 in. (100 x 2550 mm) diameter | — |
| 3.94 x 110.5 in. (100 x 2808 mm) diameter | — |
| 3.94 x 118.5 in. (100 x 3012 mm) diameter | — |
| 4.33 x 100.4 in. (110 x 2550 mm) diameter | Available |
| 4.33 x 118.5 in. (110 x 3012 mm) diameter | Available |
| 4.72 x 100.4 in. (120 x 2550 mm) diameter | Available |
| 4.72 x 118.5 in. (120 x 3012 mm) diameter | Available |
| REAR-WHEEL EQUIPMENT | |
| Tires | Group 47/48/49 tires available as Singles/Duals |
| FRONT AXLE | |
| 1150 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm) | — |
| 1300 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm) | Standard |
| Triple Link Suspension Plus (TLS), tread range 60 to 88 in. (1524 to 2235 mm) | Available |
| Triple Link Suspension Plus (TLS), with front brakes, available with 40 km/h transmissions (standard with 50 km/h transmissions) | Available |
| DIFFERENTIAL LOCK | |
| Front axle, 1150 Series MFWD | Limited slip |
| Front axle, 1300 Series MFWD | — |
| Front axle, TLS Plus | Limited slip |
| Front axle, TLS Plus with front brakes | Full-locking electrohydraulic (actuated at same time as rear diff-lock) |
| Rear axle | Full-locking electrohydraulic |
| STEERING | |
| Hydrostatic power steering | Standard: Load Sensing, Hydrostatic, Flow Metering with a 406mm diameter steering wheel |
| ActiveCommand Steering (ACS) with electric pump back-up | Available: Variable ratio 15:1 to 23:1 (3.1-5.0 turns lock to lock) w/Stability Augmentation and passive tactile feedback-345mm diameter steering wheel |
| HYDRAULIC SYSTEM | |
| Description | Closed-center, pressure and flow compensated |
| Selective control valves (SCVs) | 3, 4 Standard, 5 and 6 Available |
| Main pump, axial piston (displacement) | 63 cc standard 85 cc available |
| Maximum pressure | 2,958.1 psi (20 400 kPa) +/- 4.4 psi (300 kPa) |
| Rated flow, 45 cc pump | — |
| Rated flow, 63 cc pump | 43 U.S. gpm (162 L/min) |
| Rated flow, 85 cc pump | 59 U.S. gpm (223.3 L/min) |
| Available flow at a single rear SCV | 35 U.S. gpm (132 L/min) |
| Available flow at a single front SCV | 33 U.S. gpm (126 L/min |
| 3-POINT HITCH, REAR | |
| Description | Electrohydraulic sensing |
| Category 3/3N with Quik-Coupler | — Standard: 15,200 lb. (6,895 kg) 9,208 kg max lift |
| Category 3N/3 with Quik-Coupler | Standard: 15,200 lb. (6,895 kg) 9,208 kg max lift Available: 17,300 lb. (7,847 kg) 1,0206 kg max lift |
| 3-POINT HITCH, FRONT | |
| Description | Category 3N, available Premium Front Hitch for use with ground-engaging front implements |
| Standard lift capacity | 11,464 lb. (5200 kg) |
| DRAWBAR | |
| Category 3, 4,050 lb. (1837 kg) – 6,000 lb. (2700 kg) maximum vertical load dependent on drawbar position | Standard |
| Category 3 HD with high capacity 10,000 lb. (4536 kg) maximum vertical load | Available |
| POWER TAKE-OFF (PTO)* , REAR, INDEPENDENT | |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm | Standard |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm; capable of 1 3/8 in. (35 mm) 540/1000 rpm gearcase | Available |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm; capable of 1 3/8 in. (35 mm) 540E/1000/1000E rpm gearcase | Available |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm with 1 3/8 in. (35 mm) 540/540E/1000 rpm gearcase | Available |
| PTO speed at engine rpm | 540/1,000 at 1,950 engine rpm; 540E/1,000E PTO at 1,750 engine rpm |
| POWER TAKE-OFF (PTO)* , FRONT, INDEPENDENT | |
| 1 3/8 in. (35 mm) 21-spline, 1,000 rpm | Available; Counter Clockwise Rotation (when facing Front PTO) |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm | Available; Counter Clockwise Rotation (when facing Front PTO) |
| PTO Power (SAE hp) | 175 hp (130 kW) maximum output |
| PTO Speed at engine RPM (1:2 ratio) | 1,000 PTO rpm at 1,940E rpm |
| WHEELBASE | |
| MFWD/TLS | 115.2 in. (2925 mm) |
| MFWD / TLS axle clearance – 1300 axle, G43 420/85R34 tires | 19.5 in. (495mm) |
| INTEGRATED TECHNOLOGY | |
| AutoTrac Ready | Standard |
| JDLink™ | Available JDLink™ Connect and Ethernet Harnesses† |
| Service ADVISOR™ Remote | Capable with JDLink™ Select & Ultimate |
| CommandCenter™ 7-inch Display video with 4100 Processor | —– |
| CommandCenter™ 10-inch Display video with 4600 Processor | Video capable; four video inputs (Tyco Connector PN 776536-1) for camera with PAL or NTSC signal (camera and extension harness available through John Deere Parts |
| Factory-installed GreenStar™ 3 2630 Display | Available |
| AVERAGE STANDARD WEIGHT (less front weights) | |
| MFWD*** | — |
| TLS†† | 25,738 lb (11,674 kg) |
John Deere 7290R Row Crop Tractors
John Deere 7290R Tractor Price
- $259,798 USD
John Deere 7290R Tractor Key Facts
- PTO power 242 hp
- Engine power 290 hp
- John Deere PowerTech™ 69.0L PSS
- Choice of e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
- MFWD, or Triple Link Suspension Plus (TLS™)
John Deere 7290R Tractor Specifications
| POWER | |
| Rated PTO power (hp SAE) at rated engine speed (2100 erpm)* | 242 hp (180.5 kW) |
| Rated engine PS (hp ISO) per 97/68/EC at 2,100 engine rpm** | 290 hp (213.3 kW) |
| Maximum engine power PS (hp ISO) per 97/68/EC at 1,900 engine rpm** | 319 hp (234.6 kW) |
| Intelligent Power Management (available) | Available: 30 additional engine horsepower (22 kW) at 2,100 rpm (rated speed) |
| PTO torque rise | 40% |
| PTO torque rise | 10% |
| ENGINE | |
| Description | John Deere PowerTech PSS 9.0L Engine: B20 Diesel Compatible, in-line, 6-cylinder, wet-sleeve with 4 valves-in-head |
| Rated speed | 2,100 rpm |
| Aspiration (US EPA Tier4/EU Stage IV) | Dual turbochargers, variable geometry turbo with fixed geometry turbo in series |
| Filter, engine air | Dual stage |
| Displacement | 549 cu. in. (9.0 L) |
| Bore and stroke | 4.66 in. (118 mm) x 5.35 in. (136 mm) |
| Compression ratio | 16.0:1 |
| Lubrication | Full-pressure, full-flow filtration with bypass |
| Filter, oil | Replaceable cartridge-style |
| FUEL SYSTEM | |
| Description | Electronically controlled, high-pressure common-rail with electric fuel transfer pump (self priming) |
| Filter system | Two-stage with water separator and service-indicator light |
| Filter, primary | 10 micron replaceable cartridge with water indication sensor and drain |
| Filter, secondary | 2 micron spin-on element |
| Fuel-tank capacity CQT, G47/48 | 503L (133 gal) |
| Fuel-tank capacity PST, G47/48 | 475L (125 gal) |
| Fuel-tank capacity IVT, G47/48 | 520L (137 gal.) |
| Fuel-tank capacity PST, G49 | 497L (131 gal) |
| Fuel-tank capacity IVT, G49 | 543L (143 gal) |
| DEF Tank Capacity | 23L (6 gal) |
| Required fuel type | Ultralow sulfur diesel (B20 diesel compatible) |
| TRANSMISSIONS | |
| 20-speed CommandQuad, 26 mph (40 km/h) | — |
| 20-speed CommandQuad, 31 mph (50 km/h) | — |
| e23 Transmission 40K, 26 mph (40 km/h) | Standard (40 km/h at 1,683 rpm with group 47 tires, 40 km/h at 1,598 rpm with group 48 tires, 40km/h at 1,515 rpm with group 49 tires) |
| e23 Transmission 50K, 31 mph (50 km/h) | Available (50 km/h at 2,004 rpm with group 47 tires, 50 km/h at 1,902 rpm with group 48 tires, 50 km/h at 1,804 rpm with group 49 tires) |
| john Deere Infinitely Variable Transmission (IVT), 26 mph (40 km/h) | Available |
| John Deere Infinitely Variable Transmission (IVT), 31 mph (50 km/h) | Available |
| ELECTRICAL SYSTEM | |
| Description | Two batteries in paralle |
| Alternator/battery | Standard: 200 amps/12 Volt Available: 240 amps/12 Volt |
| Total cold-cranking amps | 1850 (2-925CCA grp 31 batteries |
| FINAL DRIVES | |
| Description | Inboard planetary, three pinion |
| REAR AXLE | |
| 3.94 x 100.4 in. (100 x 2550 mm) diameter | — |
| 3.94 x 110.5 in. (100 x 2808 mm) diameter | — |
| 3.94 x 118.5 in. (100 x 3012 mm) diameter | — |
| 4.33 x 100.4 in. (110 x 2550 mm) diameter | Available |
| 4.33 x 118.5 in. (110 x 3012 mm) diameter | Available |
| 4.72 x 100.4 in. (120 x 2550 mm) diameter | Available |
| 4.72 x 118.5 in. (120 x 3012 mm) diameter | Available |
| REAR-WHEEL EQUIPMENT | |
| Tires | Group 47/48/49 tires available as Singles/Duals |
| FRONT AXLE | |
| 1150 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm) | — |
| 1300 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm) | Standard |
| Triple Link Suspension Plus (TLS), tread range 60 to 88 in. (1524 to 2235 mm) | Available |
| Triple Link Suspension Plus (TLS), with front brakes, available with 40 km/h transmissions (standard with 50 km/h transmissions) | Available |
| DIFFERENTIAL LOCK | |
| Front axle, 1150 Series MFWD | Limited slip |
| Front axle, 1300 Series MFWD | — |
| Front axle, TLS Plus | Limited slip |
| Front axle, TLS Plus with front brakes | Full-locking electrohydraulic (actuated at the same time as rear diff-lock) |
| Rear axle | Full-locking electrohydraulic |
| STEERING | |
| Hydrostatic power steering | Standard: Load Sensing, Hydrostatic, Flow Metering with a 406mm diameter steering wheel |
| ActiveCommand Steering (ACS) with electric pump back-up | Available: Variable ratio 15:1 to 23:1 (3.1-5.0 turns lock to lock) w/Stability Augmentation and passive tactile feedback-345mm diameter steering wheel |
| HYDRAULIC SYSTEM | |
| Description | Closed-center, pressure, and flow compensated |
| Selective control valves (SCVs) | 3, 4 Standard, 5, and 6 Available |
| Main pump, axial piston (displacement) | 63 cc standard 85 cc available |
| Maximum pressure | 2,958.1 psi (20 400 kPa) +/- 4.4 psi (300 kPa) |
| Rated flow, 45 cc pump | — |
| Rated flow, 63 cc pump | 43 U.S. gpm (162 L/min) |
| Rated flow, 85 cc pump | 59 U.S. gpm (223.3 L/min) |
| Available flow at a single rear SCV | 35 U.S. gpm (132 L/min) |
| Available flow at a single front SCV | 33 U.S. gpm (126 L/min |
| 3-POINT HITCH, REAR | |
| Description | Electrohydraulic sensing |
| Category 3/3N with Quik-Coupler | — Standard: 15,200 lb. (6,895 kg) 9,208 kg max lift |
| Category 3N/3 with Quik-Coupler | Standard: 15,200 lb. (6,895 kg) 9,208 kg max lift Available: 17,300 lb. (7,847 kg) 1,0206 kg max lift |
| 3-POINT HITCH, FRONT | |
| Description | Category 3N, available Premium Front Hitch for use with ground-engaging front implements |
| Standard lift capacity | 11,464 lb. (5200 kg) |
| DRAWBAR | |
| Category 3, 4,050 lb. (1837 kg) – 6,000 lb. (2700 kg) maximum vertical load dependent on drawbar position | Standard |
| Category 3 HD with high capacity 10,000 lb. (4536 kg) maximum vertical load | Available |
| POWER TAKE-OFF (PTO)* , REAR, INDEPENDENT | |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm | Standard |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm; capable of 1 3/8 in. (35 mm) 540/1000 rpm gearcase | Available |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm; capable of 1 3/8 in. (35 mm) 540E/1000/1000E rpm gearcase | Available |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm with 1 3/8 in. (35 mm) 540/540E/1000 rpm gearcase | Available |
| PTO speed at engine rpm | 540/1,000 at 1,950 engine rpm; 540E/1,000E PTO at 1,750 engine rpm |
| POWER TAKE-OFF (PTO)* , FRONT, INDEPENDENT | |
| 1 3/8 in. (35 mm) 21-spline, 1,000 rpm | Available; Counter Clockwise Rotation (when facing Front PTO) |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm | Available; Counter Clockwise Rotation (when facing Front PTO) |
| PTO Power (SAE hp) | 175 hp (130 kW) maximum output |
| PTO Speed at engine RPM (1:2 ratio) | 1,000 PTO rpm at 1,940E rpm |
| WHEELBASE | |
| MFWD/TLS | 115.2 in. (2925 mm) |
| MFWD / TLS axle clearance – 1300 axle, G43 420/85R34 tires | 19.5 in. (495mm) |
| INTEGRATED TECHNOLOGY | |
| AutoTrac Ready | Standard |
| JDLink™ | Available JDLink™ Connect and Ethernet Harnesses† |
| Service ADVISOR™ Remote | Capable with JDLink™ Select & Ultimate |
| CommandCenter™ 7-inch Display video with 4100 Processor | —– |
| CommandCenter™ 10-inch Display video with 4600 Processor | Video capable; four video inputs (Tyco Connector PN 776536-1) for the camera with PAL or NTSC signal (camera and extension harness available through John Deere Parts |
| Factory-installed GreenStar™ 3 2630 Display | Available |
| AVERAGE STANDARD WEIGHT (less front weights) | |
| MFWD*** | — |
| TLS†† | 26,468 lb (12,005 kg) |
John Deere 7310R Row Crop Tractors
Story continues below advertisement
John Deere 7310R Tractor Price
- $289,900 USD
Also Check:
- John Deere 6M Series Row Crop Tractor
- Kubota L3560 Price
- Kubota Mini Tractor
- Kubota L5740 Tractor Price
- John Deere 5E Series Utility Tractors
John Deere 7310R Tractor Key Facts
- PTO power 260 hp
- Engine power 310 hp
- John Deere PowerTech™ 9.0L PSS
- Choice of e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
- MFWD, or Triple Link Suspension Plus (TLS™)
John Deere 7310R Tractor Specifications
| POWER | |
| Rated PTO power (hp SAE) at rated engine speed (2100 erpm)* | 260 hp (193.9 kW) |
| Rated engine PS (hp ISO) per 97/68/EC at 2,100 engine rpm** | 310 hp (228 kW) |
| Maximum engine power PS (hp ISO) per 97/68/EC at 1,900 engine rpm** | 341 hp (250.8 kW) |
| Intelligent Power Management (available) | Available: 30 additional engine horsepower (22 kW) at 2,100 rpm (rated speed) |
| PTO torque rise | 40% |
| PTO torque rise | 10% |
| ENGINE | |
| Description | John Deere PowerTech PSS 9.0L Engine: B20 Diesel Compatible, in-line, 6-cylinder, wet-sleeve with 4 valves-in-head |
| Rated speed | 2,100 rpm |
| Aspiration (US EPA Tier4/EU Stage IV) | Dual turbochargers, variable geometry turbo with fixed geometry turbo in series |
| Filter, engine air | Dual stage |
| Displacement | 549 cu. in. (9.0 L) |
| Bore and stroke | 4.66 in. (118 mm) x 5.35 in. (136 mm) |
| Compression ratio | 16.0:1 |
| Lubrication | Full-pressure, full-flow filtration with bypass |
| Filter, oil | Replaceable cartridge-style |
| FUEL SYSTEM | |
| Description | Electronically controlled, high-pressure common-rail with electric fuel transfer pump (self priming) |
| Filter system | Two-stage with water separator and service-indicator light |
| Filter, primary | 10 micron replaceable cartridge with water indication sensor and drain |
| Filter, secondary | 2 micron spin-on element |
| Fuel-tank capacity CQT, G47/48 | 503L (133 gal) |
| Fuel-tank capacity PST, G47/48 | 475L (125 gal) |
| Fuel-tank capacity IVT, G47/48 | 520L (137 gal.) |
| Fuel-tank capacity PST, G49 | 497L (131 gal) |
| Fuel-tank capacity IVT, G49 | 543L (143 gal) |
| DEF Tank Capacity | 23L (6 gal) |
| Required fuel type | Ultralow sulfur diesel (B20 diesel compatible) |
| TRANSMISSIONS | |
| 20-speed CommandQuad, 26 mph (40 km/h) | — |
| 20-speed CommandQuad, 31 mph (50 km/h) | — |
| e23 Transmission 40K, 26 mph (40 km/h) | Standard 40 kph @ 1600 rpm w/grp 48 tires, 40kph @ 1520 rpm w/grp 49 tires) |
| e23 Transmission 50K, 31 mph (50 km/h) | Standard 50 kph @ 1900 rpm w/grp 48 tires, 50kph @ 1800 rpm w/grp 49 tires) |
| john Deere Infinitely Variable Transmission (IVT), 26 mph (40 km/h) | Available |
| John Deere Infinitely Variable Transmission (IVT), 31 mph (50 km/h) | Available |
| ELECTRICAL SYSTEM | |
| Description | Two batteries in paralle |
| Alternator/battery | Standard: 200 amps/12 Volt Available: 240 amps/12 Volt |
| Total cold-cranking amps | 1850 (2-925CCA grp 31 batteries |
| FINAL DRIVES | |
| Description | Inboard planetary, three pinion |
| REAR AXLE | |
| 3.94 x 100.4 in. (100 x 2550 mm) diameter | — |
| 3.94 x 110.5 in. (100 x 2808 mm) diameter | — |
| 3.94 x 118.5 in. (100 x 3012 mm) diameter | — |
| 4.33 x 100.4 in. (110 x 2550 mm) diameter | Available |
| 4.33 x 118.5 in. (110 x 3012 mm) diameter | Available |
| 4.72 x 100.4 in. (120 x 2550 mm) diameter | Available |
| 4.72 x 118.5 in. (120 x 3012 mm) diameter | Available |
| REAR-WHEEL EQUIPMENT | |
| Tires | Group 48/49 tires available as Singles/Duals |
| FRONT AXLE | |
| 1150 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm) | — |
| 1300 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm) | Standard |
| Triple Link Suspension Plus (TLS), tread range 60 to 88 in. (1524 to 2235 mm) | Available |
| Triple Link Suspension Plus (TLS), with front brakes, available with 40 km/h transmissions (standard with 50 km/h transmissions) | Available |
| DIFFERENTIAL LOCK | |
| Front axle, 1150 Series MFWD | Limited slip |
| Front axle, 1300 Series MFWD | — |
| Front axle, TLS Plus | Limited slip |
| Front axle, TLS Plus with front brakes | Full-locking electrohydraulic (actuated at same time as rear diff-lock) |
| Rear axle | Full-locking electrohydraulic |
| STEERING | |
| Hydrostatic power steering | Standard: Load Sensing, Hydrostatic, Flow Metering with a 406mm diameter steering wheel |
| ActiveCommand Steering (ACS) with electric pump back-up | Available: Variable ratio 15:1 to 23:1 (3.1-5.0 turns lock to lock) w/Stability Augmentation and passive tactile feedback-345mm diameter steering wheel |
| HYDRAULIC SYSTEM | |
| Description | Closed-center, pressure and flow compensated |
| Selective control valves (SCVs) | 3, 4 Standard, 5 and 6 Available |
| Main pump, axial piston (displacement) | 63 cc standard 85 cc available |
| Maximum pressure | 2,958.1 psi (20 400 kPa) +/- 4.4 psi (300 kPa) |
| Rated flow, 45 cc pump | — |
| Rated flow, 63 cc pump | 43 U.S. gpm (162 L/min) |
| Rated flow, 85 cc pump | 59 U.S. gpm (223.3 L/min) |
| Available flow at a single rear SCV | 35 U.S. gpm (132 L/min) |
| Available flow at a single front SCV | 33 U.S. gpm (126 L/min |
| 3-POINT HITCH, REAR | |
| Description | Electrohydraulic sensing |
| Category 3/3N with Quik-Coupler | — Standard: 15,200 lb. (6,895 kg) 9,208 kg max lift |
| Category 3N/3 with Quik-Coupler | Standard: 15,200 lb. (6,895 kg) 9,208 kg max lift Available: 17,300 lb. (7,847 kg) 1,0206 kg max lift |
| 3-POINT HITCH, FRONT | |
| Description | Category 3N, available Premium Front Hitch for use with ground-engaging front implements |
| Standard lift capacity | 11,464 lb. (5200 kg) |
| DRAWBAR | |
| Category 3, 4,050 lb. (1837 kg) – 6,000 lb. (2700 kg) maximum vertical load dependent on drawbar position | Standard |
| Category 3 HD with high capacity 10,000 lb. (4536 kg) maximum vertical load | Available |
| POWER TAKE-OFF (PTO)* , REAR, INDEPENDENT | |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm | Standard |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm; capable of 1 3/8 in. (35 mm) 540/1000 rpm gearcase | Available |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm; capable of 1 3/8 in. (35 mm) 540E/1000/1000E rpm gearcase | Available |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm with 1 3/8 in. (35 mm) 540/540E/1000 rpm gearcase | Available |
| PTO speed at engine rpm | 540/1,000 at 1,950 engine rpm; 540E/1,000E PTO at 1,750 engine rpm |
| POWER TAKE-OFF (PTO)* , FRONT, INDEPENDENT | |
| 1 3/8 in. (35 mm) 21-spline, 1,000 rpm | Available; Counter Clockwise Rotation (when facing Front PTO) |
| 1 3/4 in. (44 mm) 20-spline, 1,000 rpm | Available; Counter Clockwise Rotation (when facing Front PTO) |
| PTO Power (SAE hp) | 175 hp (130 kW) maximum output |
| PTO Speed at engine RPM (1:2 ratio) | 1,000 PTO rpm at 1,940E rpm |
| WHEELBASE | |
| MFWD/TLS | 115.2 in. (2925 mm) |
| MFWD / TLS axle clearance – 1300 axle, G43 420/85R34 tires | 19.5 in. (495mm) |
| INTEGRATED TECHNOLOGY | |
| AutoTrac Ready | Standard |
| JDLink™ | Available JDLink™ Connect and Ethernet Harnesses† |
| Service ADVISOR™ Remote | Capable with JDLink™ Select & Ultimate |
| CommandCenter™ 7-inch Display video with 4100 Processor | —– |
| CommandCenter™ 10-inch Display video with 4600 Processor | Video capable; four video inputs (Tyco Connector PN 776536-1) for camera with PAL or NTSC signal (camera and extension harness available through John Deere Parts |
| Factory-installed GreenStar™ 3 2630 Display | Available |
| AVERAGE STANDARD WEIGHT (less front weights) | |
| MFWD*** | — |
| TLS†† | 26,468 lb (12,005 kg) |
I think it should be enough information for you to buy or sells this model tractor, but if you have any problem regarding this post, then please tell us through the comment, and we will try to solve your problem as soon as. Thanks for reading this article, and stay tuned to our site for new stuff like this.
Story continues below advertisement
Rate