John Deere 4030 Specs, Price, Attachments Information
John Deere 4030 Specs – The John Deere 4030 is a Row-Crop tractor with a horsepower of 88 and a weight ranging from 7340 to 9180 lbs.
John Deere 4030 has a wheelbase of 101 inches and uses tires of size 6.00-16 for the front and 15.5-38 for the rear.
The original price of the John Deere 4030 tractor is $16,500 USD. Below are the key Specs, price, weight, Horsepower and details about the John Deere 4030:
John Deere 4030 Specs
Production | |
| Manufacturer: | John Deere |
| Type: | Row-Crop tractor |
| Factory: | Waterloo, Iowa, USA |
| Total built: | 15,690 (total) |
| 222 (gasoline) | |
| John Deere 4030 Original price: | $17,721 (1977 ) |
John Deere 4030 Serial Numbers | |
| Location: | Serial number plate on the rear of the John Deere 4030, above the PTO shaft. |
| 1973: | 1000 |
| 1974: | 6700 |
| 1975: | 10153 |
| 1976: | 13022 |
| 1977: | 15417 |
| Final: | 16689 |
John Deere 4030 Power | |
| PTO (claimed): | 80 hp 59.7 kW |
| Drawbar (tested): | 67.03 hp 50.0 kW |
| PTO (tested): | 80.33 hp 59.9 kW |
John Deere 4030 Mechanical | |
| Chassis: | 4×2 2WD |
| Final drives: | planetary |
| Differential lock: | hydro-mechanical rear* |
| Steering: | power |
| Brakes: | differential hydraulic wet disc |
| Cab: | Open operator station. Optional four-post Roll-Gard ROPS. Optional Sound-Gard cab with heat and air-conditioning available. |
| Transmissions: | 8-speed partially synchronized |
| 16-speed partial power shift | |
13-speed creeper | |
John Deere 4030 Weight | |
| Shipping: | 7340 lbs 3329 kg |
| John Deere 4030 Operating weight: | 9180 lbs 4164 kg |
| Ballasted: | 10150 lbs 4604 kg |
John Deere 4030 Capacity | |
| Fuel: | 35 gal 132.5 L |
| Hydraulic system: | 13 gal 49.2 L |
John Deere 4030 Hydraulics | |
| Type: | closed center |
| Capacity: | 13 gal 49.2 L |
| Valves: | 1 to 3 |
| Pump flow: | 23 gpm 87.1 lpm |
John Deere 4030 Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540/1000 (1.375) |
John Deere 4030 Dimensions & Tires | |
| Wheelbase: | 101 inches 256 cm |
| John Deere 4030 Weight: | 7340 to 9180 pounds |
| Front tire: | 6.00-16 |
| Rear tire: | 15.5-38 |
John Deere 4030 Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Batteries: | 2 |
| Battery volts: | 6 |
John Deere 4030 Diesel Engine Detail | |
| 6-cylinder | |
| liquid-cooled inline horizontal-shaft | |
| Displacement: | 329 ci 5.4 L |
| Bore/Stroke: | 4.02×4.33 inches 102 x 110 mm |
| Air cleaner: | dry with secondary element |
| Pre-heating: | ether injection |
| coolant heater* | |
| Compression: | 16.2:1 |
| Rated RPM: | 2500 |
| Idle RPM: | 800-2660 |
| Operating RPM: | 1500-2500 |
| Starter: | electric |
| Starter volts: | 12 |
| John Deere 4030 Oil capacity: | 17 qts 16.1 L |
| Coolant capacity: | 22 qts 20.8 L |
John Deere 4030 Gasoline Engine Detail | |
| 6-cylinder | |
| liquid-cooled | |
| The gasoline engine was available only during the 1973 model year on the 4030. | |
| Displacement: | 303 ci 5.0 L |
| Bore/Stroke: | 3.86×4.33 inches 98 x 110 mm |
| Starter: | electric |
| Starter volts: | 12 |
John Deere 4030 Syncro-Range Transmission | |
| Type: | partially synchronized |
| Gears: | 8 forward and 2 reverse |
| Clutch: | hydraulic wet disc |
| Oil capacity: | 64 qts 60.6 L |
John Deere 4030 Quad-Range Transmission | |
| Type: | partial power shift |
| Gears: | 16 forward and 6 reverse |
| Clutch: | hydraulic wet disc |
| Oil capacity: | 64 qts 60.6 L |
Also, check here: John Deere D110
Syncro-Range Creeper Transmission | |
| Type: | creeper |
| Gears: | 13 forward and 4 reverse |
John Deere 4030 Tires | |
| Ag front: | 6.00-16 |
| Ag rear: | 15.5-38 |
| Ag front: | 7.5L-15 |
| 7.50-16 | |
| 11L-15 | |
| 9.5L-15 | |
| 7.50-18 | |
| 11.00-12 | |
| Ag rear: | 23.1-26 |
| 18.4-30 | |
| 18.4-34 | |
| 16.9-34 | |
| 13.6-38 | |
Check here: John Deere D110
John Deere 4030 Dimensions | |
| Wheelbase: | 101 inches 256 cm |
| Length: | 154.4 inches 392 cm |
| Height (steering wheel): | 84.5 inches 214 cm |
| Height (cab): | 107.7 inches 273 cm |
| Clearance (front axle): | 21.95 inches 55 cm |
| Clearance (rear axle): | 27.24 inches 69 cm |
| Clearance (drawbar): | 14.1 inches 35 cm |
| Rear axle: | Rack-and-pinion: 2.875 by 86 inches 73 by 2184 mm |
| Rear axle: | Rack-and-pinion: 3.125 by 112 inches 79 by 2844 mm |
| Rear axle: | Rack-and-pinion: 3.125 by 112 inches 79 by 2844 mm |
| Front tread: | 48 to 68 inches 121 to 172 cm |
| Rear tread: | 60 to 92 inches 152 to 233 cm |
| Rear tread: | 60 to 101 inches 152 to 256 cm |
| Rear tread: | 61 to 117 inches 154 to 297 cm |
John Deere 148 Loader Attachments
John Deere 148 Loader | |
| Loader weight: | 1350 lbs 612 kg |
| Height (to pin): | 126 inches 320 cm |
| Clearance, dumped bucket: | 102 inches 259 cm |
| Dump reach: | 32 inches 81 cm |
| Dump angle: | 38° |
| Clearance, level bucket: | 121 inches 307 cm |
| Rollback angle: | 11° |
| Breakout force (lift): | 4700 lbs 2131 kg |
| Lift to full height (at pin): | 3100 lbs 1406 kg |
| Bucket capacity: | 0.5 cu yd 0.4 cu m |
| 0.6 cu yd 0.5 cu m | |
| 0.8 cu yd 0.6 cu m | |
| 0.9 cu yd 0.7 cu m | |
| Bucket width: | 60 inches 152 cm |
| 72 inches 182 cm | |
| 84 inches 213 cm | |
| 96 inches 243 cm | |
