John Deere 112 Specs, Price, Attachments Information
John Deere 112 Specs: The John Deere 112 is a compact lawn and garden tractor that was produced in 1968. It is powered by a 10-horsepower Tecumseh engine and has a 48-inch mowing deck. The 112 is also equipped with a hydrostatic transmission, which makes it easy to operate.
Advertisement
John Deere 112 Weights approximately 288 kg and has a wheelbase of 50 inches. It is 63 inches long, 41.5 inches wide, and 38.75 inches high. The 112 has a ground clearance of 5 inches and a turning radius of 42 inches.
Here are the key Specs, price, Weight, Horsepower, and details about the John Deere 112:
Advertisement
John Deere 112 Specs
Production |
|
| Manufacturer | John Deere |
| Garden tractor | |
| Built in Horicon, Wisconsin, USA | |
| Original price: $1,475 in 1974 | |
| The John Deere 112 had a distinctive change in style for the 1968 model year when the round rear fenders of the early years were replaced with a square fender deck. | |
John Deere 112 Serial Numbers |
|
| 1966 | 2551 |
| 1967 | 3551 |
| 1968 | 100001 |
| 1969 | 130001 |
| 1970 | 160000 |
| 1971 | 185001 |
| 1972 | 250001 |
| 1973 | 260001 |
| 1974 | 300001 |
John Deere 112 Variants |
|
| 112H | hydraulic lift |
John Deere 112 Engines |
|
| 10HP Tecumseh 388cc 1-cyl gasoline | |
| 10HP Kohler 390cc 1-cyl gasoline | |
| 12HP Kohler 476cc 1-cyl gasoline | |
| Fuel tank | 1.9 gal 7.2 L |
John Deere 112 Tecumseh HH100 Engine Detail |
|
| gasoline | |
| 1-cylinder | |
| air-cooled | |
| The Tecumseh HH100 was the original engine offered in the John Deere 112. It was used through 1972. | |
| Displacement | 388 cc 23.7 ci |
| Bore/Stroke | 3.3125×2.75 inches 84 x 70 mm |
| Power (gross) | 10 hp 7.5 kW |
| Rated RPM | 3800 |
| Starter volts | 12 |
| Oil capacity | 1.25 qts 1.2 L |
John Deere 112 Kohler K241AS Engine Detail |
|
| gasoline | |
| 1-cylinder | |
| air-cooled | |
| The K241 was introduced in 1969 as an optional engine. | |
| Displacement | 390 cc 23.85 ci |
| Bore/Stroke | 3.25×2.875 inches 83 x 73 mm |
| Power (gross) | 10 hp 7.5 kW |
| Air cleaner | dry |
| Rated RPM | 3600 |
| Idle RPM | 1200-3800 |
| Starter volts | 12 |
| Sparkplug gap | 0.020 inches 0.508 mm |
| Point gap | 0.020 inches 0.508 mm |
John Deere 112 Kohler K301AS Engine Detail |
|
| gasoline | |
| 1-cylinder | |
| air-cooled | |
| The 12-horsepower K301 was introduced in 1972 and used through the end of production. | |
| Displacement | 476 cc 29.07 ci |
| Bore/Stroke | 3.38×3.25 inches 86 x 83 mm |
| Power (gross) | 12 hp 8.9 kW |
| Starter volts | 12 |
John Deere 112 Mechanical |
|
| Two-wheel drive | |
| Manual steering | |
| Open operator station. |
John Deere 112 Hydraulics |
|
| Type | 0.25 |
Also check here: John Deere 310C
John Deere 112 Power Take-off (PTO) |
|
| Mid PTO | independent |
| Clutch | electric |
John Deere 112 Dimensions & Tires |
|
| Wheelbase | 44 inches 111 cm |
| Weight | 635 lbs 288 kg |
| Front tire | 16×6.50-8 |
| Rear tire | 8-12 |
John Deere 112 Electrical |
|
| Ground | negative |
| Battery volts | 12 |
John Deere 112 Transmission |
|
| Transmission | Peerless 2300 |
| Type | gear with variable pulley drive |
| Gears | 4 forward and 1 reverse |
John Deere 112 Tires |
|
| Lawn/turf front | 16×6.50-8 |
| Lawn/turf rear | 8-12 |
John Deere 112 Dimensions |
|
| Wheelbase | 44 inches 111 cm |
| Length | 63 inches 160 cm |
| Width | 41.5 inches 105 cm |
| Height | 38.75 inches 98 cm |
| Weight | 635 lbs 288 kg |
John Deere 112 Loader Attachments
John Deere 112 Attachment overview |
|
| 38″ mid-mount mower deck | |
| 46″ mid-mount mower deck | |
| Snowblower | |
| Blade | |
| Front-end loader | |
| The 112 was compatible with the John Deere model 31 tiller. |
38″ Mower deck |
|
John Deere 39
|
| 38 inches 96 cm |
| Total width: 49.25 inches 125 cm |
| 3-blade |
|
manual lift
|
|
right-discharge
|
| Cut height: 1.5 to 3.5 inch 3 to 8 cm |
| 85 lbs 38 kg |
46″ Mower deck |
|
John Deere 47
|
| 46 inches 116 cm |
| Total width: 57 inches 144 cm |
|
3-blade
|
|
manual lift
|
|
right-discharge
|
| Cut height: 1.5 to 3.5 inch 3 to 8 cm |
| 113 lbs 51 kg |
42″ Blade |
|
John Deere 43
|
|
front-mount
|
| 42 inches width 106 cm |
| 18 inches height 45 cm |
| 8 inches lift 20 cm |
| 3 inches cut 7 cm |
| 138 lbs 62 kg |
|
manual-lift
|
|
manual-angle
|
Also, check here: John Deere 30G
Advertisement
42″ Blade |
|
John Deere 43C
|
|
center-mount
|
| 42 inches width 106 cm |
| 5.75 inches lift 14 cm |
|
Angling 23°
|
| 2 inches cut 5 cm |
| 68 lbs 30 kg |
|
manual-lift
|
|
manual-angle
|
38″ Snow blower |
|
John Deere 37A
|
| 38 inches width 96 cm |
|
single-stage
|
|
front-mount
|
|
manual-lift
|
| 180 lbs 81 kg |
Johnson 10M Loader |
| 350 lbs lift (full at pin) 158 kg |
|
47° dump
|
| 16 inches reach (dumped) 40 cm |
| 69.5 inches height (at pin) 176 cm |
| 54 inches clearance (dumped) 137 cm |
| 67 inches clearance (level) 170 cm |
| weight: 410 lbs 185 kg |
| Bucket width: 30 inches 76 cm Bucket width: 36 inches 91 cm Bucket width: 48 inches 121 cm |
Johnson 10TC Loader |
| 350 lbs lift (full at pin) 158 kg |
|
47° dump
|
| 16 inches reach (dumped) 40 cm |
| 69.5 inches height (at pin) 176 cm |
| 54 inches clearance (dumped) 137 cm |
| 67 inches clearance (level) 170 cm |
| weight: 410 lbs 185 kg |
| Bucket width: 38 inches 96 cm Bucket width: 48 inches 121 cm |
Advertisement
