John Deere 1023e Loader Specs, Price, Review & Attachments – 2022

John Deere 1023e Loader Specs, Price, Review, Features, Attachments, Overview  

John Deere 1023e Sub compact tractor equipped with Yanmar® 3TNM74F-NCJT engine, which produces 21.5 hp at rated rpm 3200 rpm.

It’s best in class features such as 14.9 hp Power take-off (PTO) power, 344 kg Lift capacity, 24-in. behind link arms, Three cylinders, 0.993 L Fuel tank capacity, etc.  

John Deere 1023e Sub compact tractor attachments include RC2048 Lift-Type Rotary Cutter, 120R Loader and D120 Loader.

Now, let’s check out the John Deere 1023e Price, Specs, Features, Attachments, Review and more information.

John Deere 1023e Loader Specs

John Deere 1023e Price

Price: $ 15,149.00USD

John Deere 1023e  Horsepower

Horsepower: 21.5 hp

John Deere 1023e Key Features

  • Powerful Final Tier 4-compliant diesel engine
  • Auto Connect™ mid-mower deck can be installed or removed in less than 5 minutes
  • Match the job at hand with infinite ground speeds

John Deere 1023e Attachments

  • RC2048 Lift-Type Rotary Cutter
  • 120R Loader
  • D120 Loader 

John Deere 1025r Specs

Key Specs
Engine power (gross) SAE J1995 rated power: 16 kW
21.5 hp
21.8 PS at 3200 rpm
Power take-off (PTO) power 11.1 kW
14.9 hp
Steering hydraulics 13.2 L/min
3.5 gpm
Implement hydraulics 13.2 L/min
3.5 gpm
Lift capacity, 24-in. behind link arms 344 kg
758 lb
Approximate shipping weight (open-station; cab) Open station: 656 kg
1446 lb
Cab: Not applicable
Wheelbase 1450 mm
57.1 in.
Engine
Manufacturer Yanmar®
Engine model 3TNM74F-NCJT
Engine power (gross) SAE J1995 rated power: 16 kW
21.5 hp
21.8 PS at 3200 rpm
Power take-off (PTO) power 11.1 kW
14.9 hp
Rated engine speed 3200 rpm
Type Diesel
Injection pump type Indirect injection
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement Three cylinders: 0.993 L
60.6 cu in.
Number of cylinders Three
Bore and stroke 74 x 77 mm
2.91 x 3.03 in.
Compression ratio 23.5:1
Engine torque at rated speed 47.7 Nm
35.2 lb-ft
Fuel tank capacity 24 L
6.3 U.S. gal.
Fuel system
Type Indirect injection
Electrical system
Battery size 500 CCA
Alternator (12-V) 40 amp
Starter size 1.2 kW
1.6 hp
Transmission
Standard transmission; forward/reverse Hydrostatic – two range
Final drive Spur gear
Brakes Wet disc (left-hand pedal)
Steering Power
Axle capacity Front
612 kg
1349 lb
Rear
715 kg
1576 lb
Hydraulics
Type Open center
Pump rated output Steering
13.2 L/min
3.5 gpm
Implement
13.2 L/min
3.5 gpm
24 L/min
6.3 gpm
Pump type Single gear
Maximum operating pressure 138 bar
2000 psi
Draft control sensing Select control
Remote control valves available Three
3-point hitch
Type Limited Category 1
Lift capacity, 24-in. behind link arms 344 kg
758 lb
Power take-off (PTO)
Standard Rear: 540 rpm
Mid: 2100 rpm
Control Independent
Clutch Wet disk
Brake (for mid and rear PTO) Wet disk
Fluid capacities
Crankcase with filter 2.7 L
2.9 qt
Transmission and hydraulic system 12.3 L
3.2 gal.
Final drive
Type Spur gear
Differential lock Yes
Operator station
Rollover protective structure Type
Foldable
Yes
Platform – flat/straddle One-piece semi flat
Gear shift location – console/floor Left-hand side
Dimensions
Wheelbase 1450 mm
57.1 in.
Front axle clearance 195 mm
7.7 in.
Turning radius Outside front tire: 2.51 m
without brakes 8.2 ft
Limited slip differential No

Approximate

Open station: 656 kg
 shipping weight (open-station; cab 1446 lb
Cab: Not applicable
Tires
Front R3 Turf: 18×8.50-10
R4: 18×8.5-10
Rear R3 Turf: 26×12-12
R4: 26×12-12
Front tread ranger 931 mm
36.7 in.
Rear tread spacing 895 mm
35.2 in.
Miscellaneous
Toolbox Yes

John Deere 1023e Review Video

That’s all about the John Deere 1023e specs, Price, Review & Attachments, I hope you like it, but if you have any query regarding this article, then please comment below in the comment box, I will solve your problem solution as soon and if you like it so please share with your friends and on social media,  Thanks for visiting our site and stay tuned with me for more stuff like.

Leave a Comment

fourteen + 20 =