Challenger MT800C And MT900C Series Special Application Tractors features include a New digital dash display that’s simpler to read and now shows selected gear, service hours, and ground speed.
An integrated ISOBUS control system that helps optimize the performance and productivity of the tractor and any attached ISOBUS-compliant tools.
New horsepower levels that push the Challenger MT800C and Challenger MT900C Series to a new plateau, where they continue to reign as the maximum horsepower, commercially available tractors in the world
Redesigned Tractor Management Center that gives more comfortable, more intuitive operation.New hydraulic system with a higher degree of control, higher flow, and greater adaptability.
You can check out the Challenger MT800C and MT900C Series Special Application Tractors each single model information such as price, specification, Key features, and images.
Challenger MT800C And MT900C Series Special Application Tractors Models Include:
- Challenger MT865C Special Application Tractor
- Challenger MT875C Special Application Tractor
- Challenger MT965C Special Application Tractor
- Challenger MT975C Special Application Tractor
Challenger MT800C And MT900C Series Special Application Tractors Price, Specs, Overview
Challenger MT865C Special Application Tractor Price
Price: $443,568 USD
Challenger MT865C Special Application Tractor Key facts
- Engine Type: Cat® C18 ACERT™ Tier III
- Gross Engine Power: 525 hp
- Cylinders: 6
- Peak Engine hp: 567 hp
- Fuel Tank Capacity: 1,249 L
- Hydraulic system: Load-Independent Flow Division (Closed-center, pressure-flow compensated)
Challenger MT865C Special Application Tractor Specifications
| ENGINE | |
| Engine | Cat® C18 ACERT™ Tier III |
| Gross Engine Power – hp (kW) | 525 (391) |
| Engine Power Growth @ 1800 rpm | 8% |
| Peak Engine hp (kW) | 567 (423) |
| Engine Torque Rise @ 1,400 rpm | 42% |
| # Cylinders / # Valves | 6 / 24 |
| Displacement – cubic in. (L) | 1,105 (18.1) |
| Aspiration | Turbocharged and air-to-air aftercooled |
| FUEL SYSTEMS | |
| Fuel Tank Capacity – US gal. (L) | MEUI – ADEM™ 4 full electronic control 330 (1,249) |
| TRANSMISSION | |
| Type | Cat® Powershift 16F / 4R |
| Maximum Speed – mph (kph) | 24.6 (39.6) |
| ELECTRICAL SYSTEM | |
| Alternator | 185 amp |
| Batteries | (4) 1,000 cca 12 V |
| HYDRAULIC SYSTEM | |
| Type of System | Load-Independent Flow Division (Closed-center, pressure-flow compensated) |
| Standard Flow – gpm (lpm) | 59 (224.2) |
| Hydraulic Remotes | 4 Standard / up to 6 Optional |
| Maximum System Pressure – psi (bar) | 2,900 (200) |
| AXLES & FINAL DRIVE | |
| Bar Diameter – in. (mm) | 6 (150) |
| Standard Tires/Belts | 30” Special Application |
| Service Brakes – (Front & Rear Axle) | Wet Disk in Axle |
| DRAWBAR | |
| Special Application Hitch Plate – Vertical Load Rating – lbs. (kg) | 20,000 (9,071) |
| DIMENSIONS | |
| Wheelbase – in. (mm) | 118 (2,997) |
| Overall Width w/ Standard Tires – in. (mm) | 141.8 (3,601) |
| Overall Length – in. (mm) | 270 (6,863) |
| Overall Height to Top of Cab – in. (mm) | 138.1 (3,509) |
| Approx. Shipping Weight – lbs. (kg) | 42,200 (19,142) |
| Maximum Operating Weight – lbs. (kg) | 53,000 (24,040) |
Challenger MT875C Special Application Tractor
Challenger MT875C Special Application Tractor Price
Price: $473,854 USD
Challenger MT875C Special Application Tractor Key facts
- Engine Type: Cat® C18 ACERT™ Tier III
- Gross Engine Power: 585 hp
- Cylinders: 6
- Peak Engine hp: 631 hp
- Fuel Tank Capacity: 1,249 L
- Hydraulic system: Load-Independent Flow Division (Closed-center, pressure-flow compensated)
Challenger MT875C Special Application Tractor Specifications
| ENGINE | |
| Engine | Cat® C18 ACERT™ Tier III |
| Gross Engine Power – hp (kW) | 585 (436) |
| Engine Power Growth @ 1800 rpm | 8% |
| Peak Engine hp (kW) | 631 (470) |
| Engine Torque Rise @ 1,400 rpm | 42% |
| # Cylinders / # Valves | 6 / 24 |
| Displacement – cubic in. (L) | 1,105 (18.1) |
| Aspiration | Turbocharged and air-to-air aftercooled |
| FUEL SYSTEMS | |
| Fuel Tank Capacity – US gal. (L) | MEUI – ADEM™ 4 full electronic control 330 (1,249) |
| TRANSMISSION | |
| Type | Cat® Powershift 16F / 4R |
| Maximum Speed – mph (kph) | 24.6 (39.6) |
| ELECTRICAL SYSTEM | |
| Alternator | 185 amp |
| Batteries | (4) 1,000 cca 12 V |
| HYDRAULIC SYSTEM | |
| Type of System | Load-Independent Flow Division (Closed-center, pressure-flow compensated) |
| Standard Flow – gpm (lpm) | 59 (224.2) |
| Hydraulic Remotes | 4 Standard / up to 6 Optional |
| Maximum System Pressure – psi (bar) | 2,900 (200) |
| AXLES & FINAL DRIVE | |
| Bar Diameter – in. (mm) | 6 (150) |
| Standard Tires/Belts | 30” Special Application |
| Service Brakes – (Front & Rear Axle) | Wet Disk in Axle |
| DRAWBAR | |
| Special Application Hitch Plate – Vertical Load Rating – lbs. (kg) | 20,000 (9,071) |
| DIMENSIONS | |
| Wheelbase – in. (mm) | 118 (2,997) |
| Overall Width w/ Standard Tires – in. (mm) | 141.8 (3,601) |
| Overall Length – in. (mm) | 270 (6,863) |
| Overall Height to Top of Cab – in. (mm) | 138.1 (3,509) |
| Approx. Shipping Weight – lbs. (kg) | 42,200 (19,142) |
| Maximum Operating Weight – lbs. (kg) | 53,000 (24,040) |
Challenger MT965C Special Application Tractor
Challenger MT965C Special Application Tractor Price
Price: $324,584 USD (Approx).
Challenger MT965C Special Application Tractor Key facts
- Engine Type: Cat® C18 ACERT™ Tier III
- Gross Engine Power: 525 hp
- Cylinders: 6
- Peak Engine hp: 567 hp
- Fuel Tank Capacity: 1,476 L
- Hydraulic system: Load-Independent Flow Division (Closed-center, pressure-flow compensated)
Challenger MT965C Special Application Tractor Specifications
| ENGINE | |
| Engine | Cat® C18 ACERT™ Tier III |
| Gross Engine Power – hp (kW) | 525 (391) |
| Engine Power Growth @ 1800 rpm | 8% |
| Peak Engine hp (kW) | 567 (423) |
| Engine Torque Rise @ 1,400 rpm | 42% |
| # Cylinders / # Valves | 6 / 24 |
| Displacement – cubic in. (L) | 1,105 (18.1) |
| Aspiration | Turbocharged and air-to-air aftercooled |
| FUEL SYSTEMS | |
| Fuel Tank Capacity – US gal. (L) | MEUI – ADEM™ 4 full electronic control 390 (1,476) |
| TRANSMISSION | |
| Type | Cat® Powershift 16F / 4R |
| Maximum Speed – mph (kph) | 24.6 (39.6) |
| ELECTRICAL SYSTEM | |
| Alternator | 185 amp |
| Batteries | (4) 1,000 cca 12 V |
| HYDRAULIC SYSTEM | |
| Type of System | Load-Independent Flow Division (Closed-center, pressure-flow compensated) |
| Standard Flow – gpm (lpm) | 59 (224.2) |
| Hydraulic Remotes | 4 Standard / up to 6 Optional |
| Maximum System Pressure – psi (bar) | 2,900 (200) |
| AXLES & FINAL DRIVE | |
| Bar Diameter – in. (mm) | 5.7 (145) |
| Standard Tires/Belts | 710/70R42 |
| Service Brakes – (Front & Rear Axle) | Wet Disk in Axle |
| DRAWBAR | |
| Special Application Hitch Plate – Vertical Load Rating – lbs. (kg) | 20,000 (9,071) |
| DIMENSIONS | |
| Wheelbase – in. (mm) | 155.5 (3,949.7) |
| Overall Width w/ Standard Tires – in. (mm) | 200 (5,077) |
| Overall Length – in. (mm) | 298 (7,569.2) |
| Overall Height to Top of Cab – in. (mm) | 151 (3,835.4) |
| Approx. Shipping Weight – lbs. (kg) | 39,767 (18,038) |
| Maximum Operating Weight – lbs. (kg) | 60,000 (27,215) |
Challenger MT975C Special Application Tractor
Challenger MT975C Special Application Tractor Key facts
- Engine Type: Cat® C18 ACERT™ Tier III
- Gross Engine Power: 585 hp
- Cylinders: 6
- Peak Engine hp: 631 hp
- Fuel Tank Capacity: 1,476 L
- Hydraulic system: Load-Independent Flow Division (Closed-center, pressure-flow compensated)
Challenger MT975C Special Application Tractor Specifications
| ENGINE | |
| Engine | Cat® C18 ACERT™ Tier III |
| Gross Engine Power – hp (kW) | 585 (436) |
| Engine Power Growth @ 1800 rpm | 8% |
| Peak Engine hp (kW) | 631 (470) |
| Engine Torque Rise @ 1,400 rpm | 42% |
| # Cylinders / # Valves | 6 / 24 |
| Displacement – cubic in. (L) | 1,105 (18.1) |
| Aspiration | Turbocharged and air-to-air aftercooled |
| FUEL SYSTEMS | |
| Fuel Tank Capacity – US gal. (L) | MEUI – ADEM™ 4 full electronic control 390 (1,476) |
| TRANSMISSION | |
| Type | Cat® Powershift 16F / 4R |
| Maximum Speed – mph (kph) | 24.6 (39.6) |
| ELECTRICAL SYSTEM | |
| Alternator | 185 amp |
| Batteries | (4) 1,000 cca 12 V |
| HYDRAULIC SYSTEM | |
| Type of System | Load-Independent Flow Division (Closed-center, pressure-flow compensated) |
| Standard Flow – gpm (lpm) | 59 (224.2) |
| Hydraulic Remotes | 4 Standard / up to 6 Optional |
| Maximum System Pressure – psi (bar) | 2,900 (200) |
| AXLES & FINAL DRIVE | |
| Bar Diameter – in. (mm) | 5.7 (145) |
| Standard Tires/Belts | 710/70R42 |
| Service Brakes – (Front & Rear Axle) | Wet Disk in Axle |
| DRAWBAR | |
| Special Application Hitch Plate – Vertical Load Rating – lbs. (kg) | 20,000 (9,071) |
| DIMENSIONS | |
| Wheelbase – in. (mm) | 155.5 (3,949.7) |
| Overall Width w/ Standard Tires – in. (mm) | 200 (5,077) |
| Overall Length – in. (mm) | 298 (7,569.2) |
| Overall Height to Top of Cab – in. (mm) | 151 (3,835.4) |
| Approx. Shipping Weight – lbs. (kg) | 39,767 (18,038) |
| Maximum Operating Weight – lbs. (kg) | 60,000 (27,215) |
That was all about the Challenger MT800C and MT900C Series Special Application Tractors. I think it should be enough information about buying this tractor. If you have any questions regarding this post, then let me know through the comment. I will solve your problem, my friends. Thanks for visiting our site and stay with me for more stuff like this.
