Bobcat L85 Specs, Weight, Price & Review
Bobcat L85 specs info – The Bobcat L85 is a new compact loader from Bobcat Company, a division of Doosan Infracore Construction Equipment. It was fashioned for usage in a wide range of industries, from landscaping and building to agriculture.
The L85’s eight thousand-five hundred-pound lifting capability and eighty-five horsepower come courtesy of the L85’s four-cylinder engine. It has a maximum lift height of 12 feet and a maximum reach of 8 feet.
With either a manual or automatic gearbox, the L85 can reach speeds of up to 20 miles per hour. With its spacious cabin, heated operator station, and hydraulic bucket positioning system, the operator’s experience is greatly enhanced.
Bobcat L85 Price
Price: $83,812 USD (Approx.)
Bobcat L85 Weight
Weight: 11,164 lb.
Bobcat L85 Speed
Speed: 17.5 mph
Bobcat L85 Horsepower
Horsepower: 68 hp
Bobcat L85 Specs
L85 Key Specifications |
|
| Horsepower | 68 hp |
| Rated Operating Capacity with Bucket (Straight) | 3,974 lb |
| Rated Operating Capacity with Bucket (Articulated) | 3,257 lb |
| Rated Operating Capacity with Forks (Straight) | 4,786 lb |
| Rated Operating Capacity with Forks (Articulated) | 3,977 lb |
| Operating Weight | 11164 lb |
| Auxiliary Std Flow | 19.8 gal/min |
| Auxiliary High Flow | 27 gal/min |
| Pump Capacity | 27 gal/min |
| Width (over tires) | 70.9 in |
Engine |
|
| Emissions Tier (EPA) | Tier 4 |
| Engine Cooling | Liquid |
| Engine Fuel | Diesel |
| Horsepower | 68 hp |
| Turbocharged Engine | yes |
Performance |
|
| Rated Operating Capacity with Bucket (Straight) | 3,974 lb |
| Rated Operating Capacity with Bucket (Articulated) | 3,257 lb |
| Rated Operating Capacity with Forks (Straight) | 4,786 lb |
| Rated Operating Capacity with Forks (Articulated) | 3,977 lb |
| Tipping Capacity with Bucket (Straight) | 7,947 lb |
| Tipping Capacity with Bucket (Articulated) | 6,515 lb |
| Operating Weight | 11164 lb |
Capacities |
|
| Fuel Tank | 20.8 gal |
Hydraulic System |
|
| Auxiliary Std Flow | 19.8 gal/min |
| Auxiliary High Flow | 27 gal/min |
| Pump Capacity | 27 gal/min |
Drive System |
|
| Drive Type | 2-speed hydrostatic with Advanced Attachment Control |
Dimension |
|
| Length with Standard Bucket | 220 in |
| Width (over tires) | 70.9 in |
| Width (with bucket) | 74.8 in |
| Inside Turning Radius w Bucket | 1986 mm |
| Turning Radius Outside | 169.9 in |
| Outside Turning Radius w Forks | 4591 mm |
| Wheelbase | 82.7 in |
| Articulation Angle | 40° |
| Oscillation Angle | 8° |
| Dump Angle @ Maximum Height | 45° |
| Ground Clearance | 12.3 in |
| Height to Bucket Hinge Pin | 10.66 ft |
| Rollback Angle | 50° |
| Tire Size | 405/70 R18 |
| Wheel Tread | 54.8 in |
Bobcat L85 Features
| Operator Canopy | Optional |
| Enclosed Operator Cab w HVAC | Standard |
| Mechanical Susp Seat | Standard |
| Air Ride Susp Seat | Not Applicable |
| Joystick Control | Standard |
| Keyed Ignition | Optional |
| Keyless Ignition | Standard |
| Speedometer | Standard |
| Hour Meter | Standard |
| Tilt and Telescoping Steering Wheel | Standard |
| Travel Foot Pedal | Standard |
| Cup Holders | Standard |
| Front and Rear Work Lights | Standard |
| Road Lights | Standard |
| Rotating Flashing Beacon | Optional |
| Four Way Flasher | Standard |
| Turn Signals | Standard |
| Advanced Attachment Control | Standard |
| Auxiliary Hydraulics | Standard |
| Engine Derate | Standard |
| Glow Plug Engine Preheat | Standard |
| High Flow | Standard |
| Hydrostatic Transmission | Standard |
| Tilt Lock Out | Standard |
| Two Speed Travel | Standard |
| Z Bar Linkage | Standard |
| Backup Alarm | Standard |
| Horn | Standard |
| Lift Arm Lockout with Manual Bypass | Standard |
| Lift-Arm Support | Standard |
| OICS System | Standard |
| Rear View Camera | Optional |
| Seat Switch | Standard |
| Side Mirrors Right and Left | Standard |
| Wheel Fenders | Standard |
Bobcat L885 Specs Review
Bobcat L885 is a small skid-steer loader, made to be used for a range of jobs, such as landscaping, construction, and agriculture. It’s powered by the 74-horsepower Tier 4 Final Perkins engine and is rated to operate at a capacity of 1850 pounds. The L885 also comes with several basic features, such as a hydrostatic transmission, four-wheel drive, and a hydraulic lifting system.
For a full review, please check this YouTube video Here.