McCormick X2 Series Tractors Price, Specifications & Features 2024
The McCormick X2 Series are compact tractors ideal for simple manoeuvring in tight spots. The cab roof and hood have been totally redesigned with a modern look matching the new McCormick family styling.
Advertisement
The McCormick X2 Series comes in 2 models: GE only available in platform version and STD with the choice of either cab or platform.
Comes with 24-inch rear tyres, the McCormick X2 Series tractor has a steering wheel height of only 1218 mm and minimum overall width of 1254 mm, making them extremely compact vehicles.
Advertisement
For an even slimmer profile, the McCormick X2 Series tractor can be optionally designed with 20-inch rear tyres.
The McCormick X2 Series tractor can be equipped with up to 3 simple- and double-acting remote valves.
Here in this article, I am going to introduce the McCormick X2 Series Tractor all model such as McCormick X2.20, McCormick X2.30, and McCormick X2.40 Tractor information in details.
Advertisement
Here you can get this type of information of McCormick x2 series Tractors such as Price, Technical Specifications, Key features, images and more, I hope It will useful to you.
so let’s check out the McCormick X2 Series each single model information:
Also Check:
Advertisement
- McCormick B-Max T0-T3 Series
- McCormick X7 VT Drive Transmission Tractors
- X5 Series – McCormick Tractors
- McCormick X4 Series Tractors
- McCormick X8 VT Drive Series Tractors
- McCormick X50 Series Tractors
- X6L Series – McCormick Tractors
- X1 Series – McCormick Compact Tractors
- McCormick B-Max T0-T2 Tractors
- McCormick B-Max T0-T2
McCormick X2.20 Tractor
McCormick X2.20 Tractor Quick Facts
- Engine: 4TNV84-KLAN Yanmar Direct-Injection Engine Tier 3
- Maximum power(ISO): 44 Hp
- Rated Speed: 2800 rpm
- Fuel Tank Capacity: 40 Liters
- Transmission: Basic Transmission + Synchro Shuttle 12 Forward + 12 Reverse (30 Km/H) Standard
- PTO: 1 speed 540 rpm (Without ground speed PTO) Standard
- Net PTO Power: 40 Hp
- Brakes: Mechanical Control Standard
- Lifting capacity: 1200 kg
McCormick X2.20 Price
Please, friends, contact your Nearest Tractor Dealer
McCormick X2.20 Specs
| ENGINE | |
| YANMAR DIRECT-INJECTION ENGINE TIER3 | 4TNV84-KLAN |
| MAX. POWER (ISO) | 44 hp /32 kw |
| RATED SPEED | 2800 rpm |
| MAX. TORQUE | 129 nm |
| MAX. TORQUE-SPEED | 1400 rpm |
| BORE/STROKE | 84X90 mm |
| DISPLACEMENT / CYLINDERS / VALVES | 1995 / 4 / 8 CM3 |
| COMPRESSION RATIO | 19:1 |
| WATER COOLING | Standard |
| AIR FILTER | DRY |
| FUEL TANK CAPACITY | 40 Liters |
| TRANSMISSION | |
| BASIC TRANSMISSION+ SYNCHRO SHUTTLE 12FWD+12REV (30 KM/H) | Standard |
| BASIC TRANSMISSION+CREEPER+ SYNCHRO SHUTTLE 16FWD+16REV | Option |
| POWER TAKE-OFF | |
| MECHANICAL ENGAGEMENT | Standard |
| 1 SPEED 540 RPM (WITHOUT GROUND SPEED PTO) | Standard |
| 2 SPEEDS 540/750 RPM | Option |
| 1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES | Standard |
| GROUND SPEED PTO ONLY WITH TWO-SPEED PTO | Option |
| NET PTO POWER (ISO) | 40 hp / 29 Kw |
| FRONT PTO | |
| MECHANICAL ENGAGEMENT | Option |
| 1 SPEED 1000 RPM | Option |
| 1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES | Option |
| 4WD FRONT AXLE | |
| MECHANICAL ENGAGEMENT | Standard |
| MAX. STEERING ANGLE | 55° |
| TWIN-LOCK ELECTROHYDRAULIC DIFF-LOCKS | Standard |
| CLUTCH | |
| INDEPENDENT DRY DUAL CLUTCH | 9 IN (228 MM) |
| MECHANICAL ENGAGEMENT | Standard |
| BRAKES | |
| MECHANICAL CONTROL | Standard |
| WET DISC REAR BRAKES, 6 DISCS | Standard |
| HYDRAULIC POWER LIFT | |
| DRAFT AND POSITION CONTROL FUNCTIONS | Standard |
| MECHANICALLY OPERATED | Standard |
| LIFTING CAPACITY | 1200 KG |
| MAX. OPERATING PRESSURE | 180 Bar |
| TOTAL HYDRAULIC FLOW (POWER LIFT+ STEERING) | 28 + 19.7 L/MIN |
| THREE-POINT LINKAGE | CAT. 1 |
| REAR REMOTE VALVES | 2 Standard / 3 Option |
| FRONT POWER LIFT | |
| MECHANICALLY OPERATED | Option |
| LIFTING CAPACITY | 400 kg Option |
| THREE-POINT LINKAGE | CAT. 1 Option |
| CAB AND DRIVING POSITION | |
| X2 SERIES CAB / RADIO FITTING FACILITY | NO FOPS option / FOPS option |
| HEATING / VENTILATION | option |
| AIR-CONDITIONING | option |
| OPENING REAR AND FRONT WINDSCREENS | option |
| REAR WIPER | option |
| ANALOG INSTRUMENTS | Standard |
| SPRUNG SEAT | Standard |
| ISO-MOUNTED PLATFORM | Standard |
| DIMENSIONS AND WEIGHTS WITH STANDARD TYRES | STD | GE |
| FRONT TYRES | 260/70R16 | 240/70R16 |
| REAR TYRES | 320/70R24 | 320/70R24 |
| A – HEIGHT TO SAFETY FRAME mm | 2097 | 2003 |
| A – HEIGHT OVER CAB mm | 2307 | NA |
| B – WHEELBASE 4WD mm | 1760 |
| C – TOTAL LENGTH WITH BALLAST WEIGHTS mm | 3225 |
| D – GROUND CLEARANCE mm | 385 | 295 |
| E – MIN. WIDTH mm | 1383 | 1254 |
| F – HEIGHT TO STEERING WHEEL mm | 1312 | 1218 |
| G – FRONT TRACK ADJUSTMENT mm | 1083 – 1314 |
| H – REAR TRACK ADJUSTMENT mm | 872 – 1258 |
| TOTAL WEIGHT WITHOUT BALLAST (120 KG) 4WD (+CAB ONLY FOR STD MODEL 150 KG) | 1460 kg |
McCormick X2.30 Tractor
McCormick X2.30 Tractor Quick Facts
- Engine: 4TNV88-KLAN Yanmar Direct-Injection Engine Tier 3
- Maximum power(ISO): 47.5 Hp
- Rated Speed: 2800 rpm
- Fuel Tank Capacity: 40 Liters
- Transmission: Basic Transmission + Synchro Shuttle 12 Forward + 12 Reverse (30 Km/H) Standard
- PTO: 1 speed 540 rpm (Without ground speed PTO) Standard
- Net PTO Power: 43 Hp
- Brakes: Mechanical Control Standard
- Lifting capacity: 1200 kg
McCormick X2.30 Price
Please, friends, contact your Nearest Tractor Dealer
McCormick X2.30 Specs
| ENGINE | |
| YANMAR DIRECT-INJECTION ENGINE TIER3 | 4TNV88-KLAN |
| MAX. POWER (ISO) | 47.5 hp /35 kw |
| RATED SPEED | 2800 rpm |
| MAX. TORQUE | 141 nm |
| MAX. TORQUE-SPEED | 1200 rpm |
| BORE/STROKE | 88X90 mm |
| DISPLACEMENT / CYLINDERS / VALVES | 2189 / 4 / 8 CM3 |
| COMPRESSION RATIO | 19:1 |
| WATER COOLING | Standard |
| AIR FILTER | DRY |
| FUEL TANK CAPACITY | 40 Litres |
| TRANSMISSION | |
| BASIC TRANSMISSION+ SYNCHRO SHUTTLE 12FWD+12REV (30 KM/H) | Standard |
| BASIC TRANSMISSION+CREEPER+ SYNCHRO SHUTTLE 16FWD+16REV | Option |
| POWER TAKE-OFF | |
| MECHANICAL ENGAGEMENT | Standard |
| 1 SPEED 540 RPM (WITHOUT GROUND SPEED PTO) | Standard |
| 2 SPEEDS 540/750 RPM | Option |
| 1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES | Standard |
| GROUND SPEED PTO ONLY WITH TWO-SPEED PTO | Option |
| NET PTO POWER (ISO) | 43 hp / 32 Kw |
| FRONT PTO | |
| MECHANICAL ENGAGEMENT | Option |
| 1 SPEED 1000 RPM | Option |
| 1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES | Option |
| 4WD FRONT AXLE | |
| MECHANICAL ENGAGEMENT | Standard |
| MAX. STEERING ANGLE | 55° |
| TWIN-LOCK ELECTROHYDRAULIC DIFF-LOCKS | Standard |
| CLUTCH | |
| INDEPENDENT DRY DUAL CLUTCH | 9 IN (228 MM) |
| MECHANICAL ENGAGEMENT | Standard |
| BRAKES | |
| MECHANICAL CONTROL | Standard |
| WET DISC REAR BRAKES, 6 DISCS | Standard |
| HYDRAULIC POWER LIFT | |
| DRAFT AND POSITION CONTROL FUNCTIONS | Standard |
| MECHANICALLY OPERATED | Standard |
| LIFTING CAPACITY | 1200 KG |
| MAX. OPERATING PRESSURE | 180 Bar |
| TOTAL HYDRAULIC FLOW (POWER LIFT+ STEERING) | 28 + 19.7 L/MIN |
| THREE-POINT LINKAGE | CAT. 1 |
| REAR REMOTE VALVES | 2 Standard / 3 Option |
| FRONT POWER LIFT | |
| MECHANICALLY OPERATED | Option |
| LIFTING CAPACITY | 400 kg Option |
| THREE-POINT LINKAGE | CAT. 1 Option |
| CAB AND DRIVING POSITION | |
| X2 SERIES CAB / RADIO FITTING FACILITY | NO FOPS option / FOPS option |
| HEATING / VENTILATION | option |
| AIR-CONDITIONING | option |
| OPENING REAR AND FRONT WINDSCREENS | option |
| REAR WIPER | option |
| ANALOG INSTRUMENTS | Standard |
| SPRUNG SEAT | Standard |
| ISO-MOUNTED PLATFORM | Standard |
| DIMENSIONS AND WEIGHTS WITH STANDARD TYRES | STD | GE |
| FRONT TYRES | 260/70R16 | 240/70R16 |
| REAR TYRES | 320/70R24 | 320/70R24 |
| A – HEIGHT TO SAFETY FRAME | 2097 | 2003 |
| A – HEIGHT OVER CAB MM | 2307 | NA |
| B – WHEELBASE 4WD MM | 1760 |
| C – TOTAL LENGTH WITH BALLAST WEIGHTS MM | 3225 |
| D – GROUND CLEARANCE MM | 385 | 295 |
| E – MIN. WIDTH MM | 1383 | 1254 |
| F – HEIGHT TO STEERING WHEEL MM | 1312 | 1218 |
| G – FRONT TRACK ADJUSTMENT MM | 1083 – 1314 |
| H – REAR TRACK ADJUSTMENT MM | 872 – 1258 |
| TOTAL WEIGHT WITHOUT BALLAST (120 KG) 4WD (+CAB ONLY FOR STD MODEL 150 KG) | 1460 kg |
McCormick X2.40 Tractor
McCormick X2.40 Tractor Quick Facts
- Engine: 4TNV84T-2XLAN Yanmar Direct-Injection Engine Tier 3
- Maximum power(ISO): 54.2 Hp
- Rated Speed: 2800 rpm
- Fuel Tank Capacity: 40 Litres
- Transmission: Basic Transmission + Synchro Shuttle 12 Forward + 12 Reverse (30 Km/H) Standard
- PTO: 1 speed 540 rpm (Without ground speed PTO) Standard
- Net PTO Power: 50,7 Hp
- Brakes: Mechanical Control Standard
- Lifting capacity: 1200 kg
McCormick X2.40 Price
Please, friends, contact your Nearest Tractor Dealer
McCormick X2.40 Specs
| ENGINE | |
| YANMAR DIRECT-INJECTION ENGINE TIER3 | 4TNV84T-2XLAN |
| MAX. POWER (ISO) | 54.2 hp /39.9 kw |
| RATED SPEED | 2800 rpm |
| MAX. TORQUE | 159,5 nm |
| MAX. TORQUE-SPEED | 1200 rpm |
| BORE/STROKE | 84X90 mm |
| DISPLACEMENT / CYLINDERS / VALVES | 1995 /4 TURBO /16 cm 3 |
| COMPRESSION RATIO | 18.9:1 |
| WATER COOLING | Standard |
| AIR FILTER | DRY |
| FUEL TANK CAPACITY | 40 Litres |
| TRANSMISSION | |
| BASIC TRANSMISSION+ SYNCHRO SHUTTLE 12FWD+12REV (30 KM/H) | Standard |
| BASIC TRANSMISSION+CREEPER+ SYNCHRO SHUTTLE 16FWD+16REV | Option |
| POWER TAKE-OFF | |
| MECHANICAL ENGAGEMENT | Standard |
| 1 SPEED 540 RPM (WITHOUT GROUND SPEED PTO) | Standard |
| 2 SPEEDS 540/750 RPM | Option |
| 1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES | Standard |
| GROUND SPEED PTO ONLY WITH TWO-SPEED PTO | Option |
| NET PTO POWER (ISO) | 50,7 hp / 37,3 Kw |
| FRONT PTO | |
| MECHANICAL ENGAGEMENT | Option |
| 1 SPEED 1000 RPM | Option |
| 1”3/8 (34.9 MM) PTO SHAFT WITH 6 SPLINES | Option |
| 4WD FRONT AXLE | |
| MECHANICAL ENGAGEMENT | Standard |
| MAX. STEERING ANGLE | 55° |
| TWIN-LOCK ELECTROHYDRAULIC DIFF-LOCKS | Standard |
| CLUTCH | |
| INDEPENDENT DRY DUAL CLUTCH | 9 IN (228 MM) |
| MECHANICAL ENGAGEMENT | Standard |
| BRAKES | |
| MECHANICAL CONTROL | Standard |
| WET DISC REAR BRAKES, 6 DISCS | Standard |
| HYDRAULIC POWER LIFT | |
| DRAFT AND POSITION CONTROL FUNCTIONS | Standard |
| MECHANICALLY OPERATED | Standard |
| LIFTING CAPACITY | 1200 KG |
| MAX. OPERATING PRESSURE | 180 Bar |
| TOTAL HYDRAULIC FLOW (POWER LIFT+ STEERING) | 28 + 19.7 L/MIN |
| THREE-POINT LINKAGE | CAT. 1 |
| REAR REMOTE VALVES | 2 Standard / 3 Option |
| FRONT POWER LIFT | |
| MECHANICALLY OPERATED | Option |
| LIFTING CAPACITY | 400 kg Option |
| THREE-POINT LINKAGE | CAT. 1 Option |
| CAB AND DRIVING POSITION | |
| X2 SERIES CAB / RADIO FITTING FACILITY | NO FOPS option / FOPS option |
| HEATING / VENTILATION | option |
| AIR-CONDITIONING | option |
| OPENING REAR AND FRONT WINDSCREENS | option |
| REAR WIPER | option |
| ANALOG INSTRUMENTS | Standard |
| SPRUNG SEAT | Standard |
| ISO-MOUNTED PLATFORM | Standard |
| DIMENSIONS AND WEIGHTS WITH STANDARD TYRES | STD | GE |
| FRONT TYRES | 260/70R16 | 240/70R16 |
| REAR TYRES | 320/70R24 | 320/70R24 |
| A – HEIGHT TO SAFETY FRAME | 2097 | 2003 |
| A – HEIGHT OVER CAB MM | 2307 | NA |
| B – WHEELBASE 4WD MM | 1760 |
| C – TOTAL LENGTH WITH BALLAST WEIGHTS MM | 3225 |
| D – GROUND CLEARANCE MM | 385 | 295 |
| E – MIN. WIDTH MM | 1383 | 1254 |
| F – HEIGHT TO STEERING WHEEL MM | 1312 | 1218 |
| G – FRONT TRACK ADJUSTMENT MM | 1083 – 1314 |
| H – REAR TRACK ADJUSTMENT MM | 872 – 1258 |
| TOTAL WEIGHT WITHOUT BALLAST (120 KG) 4WD (+CAB ONLY FOR STD MODEL 150 KG) | 1460 kg |
Final Words
That was all about the McCormick X2 Series Tractors, I hope it will helpful for you to buy or sell this model tractors but if you have any problem then please comment below in the comment box, we will solve your problem as soon as possible, Thanks for visiting our site and stay tuned with me for more stuff like this friends.
Advertisement
