John Deere 5400 Specs, Weight, Price & Review ❤
John Deere 5400 Specs, Weight, Price & Review
Here in this post, I have gathered information about the John Deere 5400 from its official website, including its specifications, weight, price, and dimensions.
We believe in providing reliable information to our readers, therefore we prefer to obtain information on the John Deere 5400 from authentic sources.
This article, which has been updated, has all the information you require about the John Deere 5400.
John Deere 5400 Overview
John Deere’s 5000 Utility series includes the 2WD or 4WD 5400. From 1992 until 1997, John Deere made this tractor in Augusta, Georgia.
The JD 5400 has a 2.9 L (179.0 cuin) three-cylinder diesel engine with one of three transmissions: unsynchronized with nine forward and three reverse gears, partially synchronized with nine forward and three reverse gears, or power shuttle with 12 forward and 12 reverse gears.
John Deere powered the 5400 utility tractor. It’s a 2.9 L, 2,933 cm2, turbocharged diesel engine with a 4.17-inch cylinder bore and 4.33-inch piston stroke. It’s 17.8:1. This engine produced 68.4 HP @ 2,400 pm.
The JD 5400 has hydrostatic power steering, differential hydraulic wet disc brakes, a two-post folding ROPS or cab with air conditioning (optional), and a 68.1-liter fuel tank.
John Deere 5400 price
price = $1,899 (2011)
John Deere 5400 weight
weight = 4WD ROPS: 2,320 kg (5,115 lbs)
John Deere 5400 Height
Height = : 2,310 mm (90.9 in)
John Deere 5400 Horsepower
Horsepower = 51.0 kW; 68.4 HP
John Deere 5400 Specifications
General Specifications
| Model | John Deere 5400 |
| Width | 1,740 mm (68.5 in) |
| Wheel base | 2,040 mm (80.3 in) |
| Weight (operating) | 4WD ROPS: 2,320 kg (5,115 lbs) |
| Battery | 12V |
| Length | 2WD: 3,190 mm (125.6 in) 4WD: 3,300 mm (129.9 in) |
| Height | ROPS: 2,310 mm (90.9 in) |
| Ground clearance (front axle) | 2WD: 460 mm (18.1 in) 4WD: 470 mm (18.5 in) |
| Fuel tank capacity | 68.1 liters (18 US gal.; 15 Imp. gal) |
| Cabin type | Two-post folding ROPS or Cab with air-conditioning (optional) |
Hydraulic system
| Hydraulic type | Open center |
| Valves | 1 to 3 |
| Steering flow | 6.8 gpm (25.7 lpm) |
| Pressure | 2750 psi (189.6 bar) |
| Pump flow | 11.4 gpm (43.2 lpm) |
| Total flow | 18.2 gpm (68.9 lpm) |
Engine
| Engine model | John Deere |
| Cylinders | 3 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Fuel type | Diesel |
| Bore and stroke | 106.0 mm X 110.0 mm (4.17 in X 4.33 in) |
| Horsepower | 69.4 PS (51.0 kW; 68.4 HP) at 2,400 rpm |
| Displacement | 2.9 L, 2,933 cm2, (179.0 cu·in) |
| Compression ratio | 17.8:1 |
| Starter | Electric |
Tires
| Rear tires | Ag: 16.9-30 |
| Front tires | Ag: 7.50-16 (2WD), 11.2-24 (4WD) |
PTO (Power take-off shaft)
| Rear PTO speed | 540 rpm |
| Rear PTO type | Independent |
Transmission and chassis
| Chassis | 4×2 2WD or 4×4 MFWD 4WD (optional) |
| Brakes | Differential hydraulic wet disc |
| Steering type | Hydrostatic power |
| Differential lock | Mechanical standard |
| Transmission model | John Deere Top-Shaft Synchronized |
| Gears | 9 forward and 3 reverse |
| Transmission type | Partially synchronized with dry disc clutch |
| Speed | Forward: 27.1 kmh (16.8 mph) Reverse: 23.2 kmh (14.4 mph) |
| Transmission model | John Deere Collar Shift |
| Gears | 9 forward and 3 reverse |
| Transmission type | Unsynchronized gear with dry disc clutch |
| Speed | Forward: 27.1 kmh (16.8 mph) Reverse: 23.2 kmh (14.4 mph) |
| Transmission model | John Deere TSS Reverser with wet disc clutch |
| Gears | 12 forward and 12 reverse |
| Transmission type | Power shuttle |
Three-Point Hitch
| Control type | Position control with top-link draft sensing |
| Category | II/I |
| Lift capacity (at 610 mm/ 24 in) | 1,530 kg (3,375 lbs) |
Capacity
| ROPS Fuel | 18 gal 68.1 L |
| Hydraulic system | 10 gal 37.9 L |
| Cab Fuel | 22 gal 83.3 L |
Electrical
| Ground | negative |
| ROPS Charging amps | 40 |
| Battery volts | 12 |
| Charging system | alternator |
| Cab Charging amps | 60 |
Dimensions
| 2WD Length | 125.9 inches 319 cm |
| Width | 70.7 inches 179 cm * |
| 4WD Clearance (front axle) | 17.7 inches 44 cm |
| 4WD Clearance (drawbar) | 18.0 inches 45 cm |
| 2WD Front tread | 56.5 to 76.2 inches 143 to 193 cm |
| Rear tread | 53.8 to 81.6 inches 136 to 207 cm (steel) |
| Wheelbase | 80.7 inches 204 cm |
| 4WD Length | 131 inches 332 cm |
| 2WD Clearance (front axle) | 18.8 inches 47 cm |
| 2WD Clearance (drawbar) | 18.6 inches 47 cm |
| Rear axle | Flange: 57.3 inch length 1455 mm |
| 4WD Front tread | 50.9 to 79 inches 129 to 200 cm |
| Rear tread | 60.4 to 80.4 inches 153 to 204 cm (cast) |
John Deere 5400 Review
The John Deere 5400 was an incredibly compact utilitarian tractor that was manufactured between 2001 and 2013. It’s driven by a 52-horsepower turbocharged diesel engine that has three cylinders and can be found in 2-wheel drive and four-wheel drive models. For a full review, please check this YouTube video Here.
John Deere 5400 Serial Numbers
| 1992 | 130000 |
| 1993 | 240000 |
| 1994 | —— |
| 1995 | 440274 |
| 1996 | 540001 |
| 1997 | 640000 |
John Deere 5400 Attachment
- John Deere 520 Loader
- John Deere 540 Loader
- John Deere 540 MSL Loader
- John Deere 10A Backhoe
Final Thoughts
After research, I have provided information about John Deere 5400 Specs, Weight, Price & Review in this post.
So I hope you liked this article. If you liked then share this article with your friends, family, and relatives.
And if you still feel that I have left out something in this post then you can tell me in the comment box below.
FAQs For John Deere 5400
Q. How many horsepower does a John Deere 5400 have?
51.0 kW; 68.4 HP
Q. What year did John Deere make 5400?
The John Deere 5400 is a 2WD or 4WD utility tractor from the 5000 Utility series. This tractor was made by John Deere in Augusta, Georgia, USA, from 1992 to 1997.
