Bobcat SB200 Specs, Weight, Price & Review ❤️
Bobcat SB200 Specs, Weight, Price & Review
The Bobcat SB200 snow blower is a compact and lightweight equipment that is suitable for cleaning sidewalks, small driveways, and other areas with light to moderate snowfall.
Advertisement
It is intended to be simple to operate and maintain, and is made with high-quality materials to assure consistent performance season after season.
Advertisement
Bobcat SB200 Price
Price: $5,500.00 USD (Approx.)
Bobcat SB200 Weight
Weight: 810 lb
Bobcat SB200 Specs
Engine |
|
| Blade Tip Speed At2000rpm | 8,200 ft/min |
| Blade Tip Speed At2200rpm | 9,000 ft/min |
| Displacement | 55 in³ |
| Emissions Tier (EPA) | Tier 4 |
| Emissions Tier (EPA) | Tier 4 |
| Engine Cooling | Liquid |
| Engine Fuel | Diesel |
| Engine Model | 3FT-TH4-U |
| Fuel Tank | 29.5 gal |
| Fuel Tank | 30.6 gal |
| Gross HP | 57.7 hp |
| Horsepower | 100 hp |
| Maximum Governed RPM | 2,100 rpm |
| Number of Cylinders | 3 |
| RPM | 2600 |
Drivetrain |
|
| Blade Tip Speed Max | 9,000 ft/min |
| Brake Type | Wet Multi Disc |
| Max Wheel Tip Speed | 2,985 ft/min |
| Mower Blade Tip Speed | 18,770 ft/min |
| Recommended Drum Speed | 20 rpm |
| Recommended Drum Speed At | 11 gal/min |
| Tip Speed At22gpm | 3,256 ft/min |
| Transmission Type | Infinite, 3-Range Hydrostatic (Servo control valve with Electric sol.) |
Hydraulics |
|
| Flow Required Max | 31 gal/min |
| Flow Required Min | 14.5 gal/min |
| Implement Hydraulic Flow | 9.62 gal/min |
| Steering Hydraulic Flow | 4.94 gal/min |
| Flow Range Max | 40 gal/min |
| Flow Range Min | 17 gal/min |
| Flow Rate | 17 gal/min |
| Implement Hydraulic Flow | 14 gal/min |
| Steering Hydraulic Flow | 12 gal/min |
| Total Hydraulic Flow | 26 gal/min |
Measurements |
|
| Bucket Width | 6′ 0″ |
| Front Tire Size | Front AG.(Turf, Industrial) ‘9.5-16(29-12.5-15, 10-16.5) |
| Ground Clearance | 13.7 in |
| Height | 96.5 in |
| Length | 139.6 in |
| Loader Lift Height | 9′ 1″ |
| Rear Tire Size | Rear AG. (Turf, Industrial) ‘13.6-28(21.5L-16.1, 17.5-24) |
| Turning Radius | 10′ 0″ |
| Wheelbase | 6′ 3″ |
| Width | 66 in |
Dimensions |
|
| Height | 61 in |
| Intake Height | 25 in |
| Length | 38.5 in |
| Width | 68.5 in |
| Bed Height From Ground | 38.2 in |
| Blade Height | 432 mm |
| Bolster Width | 1468 mm |
| Box Blade Moldboard Width | 84 in |
| Bucket Capacity | 14.3 ft3 |
| Capacity | 6.9 ft3 |
| Capacity Heaped | 87.9 ft3 |
| Capacity Struck | 67.5 ft3 |
| Clamp Width | 15.9 in |
| Closed Height | 34.1 in |
| Closed Length | 49.1 in |
| Cutting Edge Length | 6 in |
| Cutting Edge Reversible Length | 6 in |
| Cutting Edge Reversible Width | 0.6 in |
| Cutting Edge Width | 79 in |
| Cutting Width | 66 in |
| Discharge Chute Height | 93.3 in |
| Drum Diameter Padded | 26 in |
| Drum Width | 80 in |
| Drum Width Max | 40 in |
| Feed Table Height | 25.4 in |
| Fork Width | 4 in |
| Frame Weight | 893 lb |
| Frame Width Std Equipment | 56.2 in |
| Grapple Width | 82.5 in |
| Ground Clearance | 7.2 in |
| Height Hammer Fully Raised | 74 in |
| Height V | 37.6 in |
| Height With Blade Extension | 32.8 in |
| Height with Operator Cab | 83.4 in |
| Hopper Capacity | 10 ft3 |
| Iso Heaped Capacity V | 88.99 ft3 |
| Iso Struck Capacity V | 0.38 ft3 |
| Length V | 46.4 in |
| Length with Standard Bucket | 147.7 in |
| Length without Attachment | 119.3 in |
| Maximum Aggregate Size | 1.5 in |
| Maximum Cutting Capacity | 4 in |
| Moldboard Cutting Edge Reversible Height | 6 in |
| Moldboard Cutting Edge Reversible Width | 0.5 in |
| Open Height | 51.8 in |
| Open Length | 49.1 in |
| Operating Weight | 18,977 lb |
| Overall Attachment Width | 89.9 in |
| Overall Length in Travel Position | 246 in |
| Pallet Fork Width | 4 in |
| Sweep Width | 84 in |
| Sweep Width Fully Angled | 65.5 in |
| Sweep Width Fully Angled At | 25deg |
| Sweep Width Straight | 70 in |
| Vertical Pumping Height | 50 ft |
| Weight Class | 8.6 t |
| Weight Of Hammer | 1,140 lb |
| Wheelbase | 52.9 in |
| Width V | 91.8 in |
| Width (with bucket) | 80 in |
| Widths Available Max | 8 in |
| Widths Available Min | 6 in |
| Working Width | 75.4 in |
| Working Width Angled Blade | 85 in |
| Working Width Fully Angled | 83 in |
| Working Width Scoop Blade | 84 in |
| Working Width Straight Blade | 98 in |
| Working Width V Blade | 85.5 in |
Operational |
|
| Operating Weight | 810 lb |
| PTO HP | 48.3 hp |
| Arm Digging Force | 8,253 lbf |
| Auxiliary High Flow | 36.6 gal/min |
| Auxiliary Pressure | 3,045 psi |
| Auxiliary Std Flow | 23 gal/min |
| Boom Swing – Left | 64° |
| Boom Swing – Right | 61° |
| Bucket Digging Force | 16,269 lbf |
| Cargo Box Bed Load Capacity | 2000 lb |
| Cargo Box Bed Load Height | 38.2 in |
| Cargo Box Height | 10 in |
| Cargo Box Length | 56 in |
| Cargo Box Maximum Load | 2000 lb |
| Cargo Box Volume | 18 ft³ |
| Cargo Box Width | 51 in |
| Dig Depth | 62 in |
| Dig Depth Without Extensions | 72 in |
| Dig Force Bucket | 2,200 lbf |
| Dig Force Dipper | 968 lbf |
| Dig Width | 914.4 mm |
| Ground Clearance | 9.2 in |
| Ground Pressure (Rubber) | 4.9 psi |
| Height to Bucket Hinge Pin | 144 in |
| Length of track on the ground | 40.6 in |
| Lift Capacity at 24″ behind Lift Point | 1775 lb 24” behind lift point |
| Lift Capacity At 24″ behind Lift Point | 2,908 lb |
| Lift Capacity @ 500mm Ahead Of Bkt Pivot | 2,324 lb |
| Lift Radius | 118 in |
| Machine Rated Capacity | 2200 lb |
| Maximum Dig Depth | 15.5 ft |
| Max Dump Height | 16.5 ft |
| Max Lift | 173 mm |
| Maximum Reach at Ground Level | 23.6 ft |
| Travel Speed – Max | 17 mph |
| Maximum Dig Depth | 76.2 in |
| Maximum Operating Pressure | 3,300 psi |
| Mid-PTO – RPM | 2000 |
| Operating Weight Less Bit | 454 lb |
| Operating Weight V | 1113 lb |
| Operating Weight With Teeth V | 1,177 lb |
| Operating Weight Withfrontgate | 3,065 lb |
| Operating Weight Without Teeth V | 1,213 lb |
| Operating Weightwith Pinon Mount | 876 lb |
| Operating Weightwith X Change Mount | 881 lb |
| Outside Turning Diameter | 210 in |
| 3-Point Hitch | Category 2 |
| PTO HP | 25 hp |
| 3-pt Lift Control Type | Position with Draft Control |
| Pump Capacity | 12 gal/min |
| Rated Lift Capacity | 9754 lb |
| Rated Operating Capacity (SAE) | 3,950 lb |
| Reach @ Maximum Height | 29.7 in |
| Rear PTO – RPM | 540 |
| Rear PTO System | Independent |
| Rear PTO – RPM | 540 |
| Standard Boom Length | 79 in |
| System Relief @ Quick Couplers | 3,500 psi |
| 3-Point Hitch | Category 1 |
| Tipping Load | 7900 lb |
| Total Vehicle-Rated Capacity | 4200 lb |
| Travel Speed | 7.1 mph |
| Travel Speed – High | 2.9 mph |
| Travel Speed – Low | 1.7 mph |
| Travel Speed – Reverse | 2.9 mph |
| Travel Speed (2-speed option) | 12.3 mph |
| Turning Radius | 89 in |
| Turning Radius (AWS Mode) | 151.5 in |
Other |
|
| Auger Diameter | 14 in |
| Discharge Chute Angle | 270deg |
| Fan Diameter | 20 in |
| Angle | 30deg |
| Blade Base | 1212 mm |
| Blade Offset Hydraulic Right Or Left | 13 in |
| Blade Offset Right Or Left | 12 in |
| Blade Tip Speed At2000rpm | 8,200 ft/min |
| Blade Tip Speed At2200rpm | 9,000 ft/min |
| Blows Per Minute At | 21 gal/min |
| Broom Bristle Diameter | 24 in |
| Broom Diameter | 24 in |
| Broom R P M At | 15 gal/min |
| Concrete Cylinder Diameter | 6 in |
| Concrete Cylinder Stroke | 24 in |
| Cutting Depth Max | 5 in |
| Cutting Depth Min | 0 in |
| Cutting Wheel Diameter | 28.5 in |
| Cylinder Bore | 3.5 in |
| Cylinder Rod | 1.8 in |
| Cylinder Stroke | 9.6 in |
| Degree Of Angle Right Or Left | 12deg |
| Drum Diameter | 14.5 in |
| Drum Diameter Padded | 26 in |
| Dynamic Force | 6,400 lb |
| Feeder Opening | 9.2 in |
| Frequency | 2000 vpm |
| Hammer Stroke | 38 in |
| Hopper Capacity | 9.6 ft3 |
| Horizontal Pumping Distance | 250 ft |
| Max Concrete Thickness | 18 in |
| Max Cut Depth | 188 mm |
| Max Reach | 88 in |
| Maximum Concrete Pressure | 750 psi |
| Maximum Cutting Angle | 8deg |
| Maximum Recommended Boring Distance | 30 ft |
| Moldboard Angle Right Or Left | 30deg |
| Oscillation Angle | 10deg |
| Planting Distance Next To Curb | 2.6 in |
| Predrilled For V | Bolt-on Edges or Teeth |
| Pumping Cylinder Diameter | 3 in |
| Shank Thickness | 1.5 in |
| Shut Off Travel | 8.5 in |
| Side Shift Travel | 21.8 in |
| Spreading Pattern Max | 28 ft |
| Spreading Pattern Min | 18 ft |
| Swing Angle | 180deg |
| Swing Tube Diameter | 5 in |
| Swing Valve Cylinder Diameter | 3 in |
| Swing Valve Cylinder Stroke | 6 in |
| Tine Radius | 33 in |
| Tine Thickness | 0.8 in |
| Tine Thickness V | 0.4 in |
| Tool Diameter | 2.8 in |
| Tooth Radius | 41 in |
| Tooth Thickness | 1 in |
| Tree Diameter Continous Use | 5 in |
| Tree Diameter Intermittent Removal | 9 in |
| Tree Diameter Occasional Removal | 12 in |
| Wheel Diameter | 30 in |
| Working Depth | 3.5 in |
Bobcat SB200 Features
➡Chain and Sprocket System: Instead of cables, a chain and sprocket system turns the chute. This keeps the cables from getting loose, tangled, or frozen and protects uptime as much as possible.
Advertisement
➡Driveways, sidewalks, and parking lots should be cleared of snow.
➡Cutting Edge: It can be changed, which keeps costs down.
➡Direct-Drive Hydraulic Motors: Gives the attachment the power it needs to work while lowering maintenance, prolonging the life of the attachment, and getting rid of high-wear parts like gearboxes, chains, sprockets, and sheer pins.
Advertisement
➡Rotating Chute and Deflector: The chute can be turned up to 276 degrees, and the deflector can be moved up or down to point snow in either direction and throw it exactly where it needs to go.
➡Skid shoes are adjustable so that they can be set to cleanly scrape the pavement or higher to clear the snow from granular material lots and driveways.
Bobcat SB200 Options
- Air Conditioning
- Cab Enclosure
- Cab Heater
- Deluxe Instrumentation
- High Flow Option
- Hydraulic Bucket Positioning
- Joystick Control
- Power Bob-Tach
- Radio
- Rear Hydraulics
- Ride Control
- Sound Option
Bobcat SB200 Review
Bobcat SB200 Snowblower is a high-powered snowblower attachment specifically designed to work on Bobcat skid steers as well as Toolcat Utility vehicles. It has a 60-inch or 72-inch clear width as well as it has a 9.6-horsepower motor and a two-stage auger system that can dump snow as high as 40 feet.
For a full review, please check this YouTube video Here.
Advertisement
