John Deere X590 Specs, Price, Review & Features – 2024
John Deere X590 Specs, Price, Review, Features, Attachments, Overview
John Deere X590 Lawn Tractor equipped with FS730 EFI (Electronic fuel injection), overhead valve, full-pressure lube, oil filter engine, which produces 25.5 hp power.
It’s best in class features such as 25.5-hp (19.0 kW)* iTorque™ Power System, 54-in.(137 cm) Accel Deep™ Deck,compatible with optional MulchControl™ kit with one-touch technology, Electronic throttle control and power two-wheel steer, etc.
John Deere X590 Lawn Tractor attachments Right side of Accel Deep 54A Mower Deck.
Now, let’s check out the John Deere X590 Price, Specs, Features, Attachments, Review and more information.
John Deere X590 Price
Price: Between $6,295 to $8,000 USD
John Deere X590 Horsepower
Horsepower: 25.5
John Deere X590 Key Features
- 25.5-hp (19.0 kW)* iTorque™ Power System
- 54-in. (137 cm) Accel Deep™ Deck, compatible with optional MulchControl™ kit with one-touch technology
- Electronic throttle control and power two-wheel steer
- 4 year/500 hour bumper-to-bumper warranty
- Fuel tank capacity 4.4-U.S. Gal (16.6 L)
John Deere X590 Attachments
- Right side of Accel Deep 54A Mower Deck
John Deere X590 Specs
Key Specs |
|
| Engine power | 25.5 hp19 kW |
|---|---|
| Oil change | No-tools oil drain with replaceable filter |
| Engine manufacturer/model | FS730 EFI |
| Transaxle type | K72 hydrostatic integrated with transaxle |
| Transaxle control | Twin Touch™ pedals |
| Rear tires | 24×12-12 HDAP |
| Lift system type | Hydraulic |
| Cutting width | Accel Deep™ mower deck, 54 in.137 cm |
| U.S. warranty | 4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Engine |
|
| Power | 25.5 hp19 kW |
| Displacement | 44.3 cu in.726 cc |
| Manufacturer/model | FS730 EFI |
| Type | Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter |
| Cylinders | V-twin, cast-iron liners |
| Governor | Constant-speed electronic throttle control |
| Choke/speed control | No choke required |
| Cooling method | Air |
| Air cleaner | Dry, replaceable with foam precleaner |
| Oil change | No-tools oil drain with replaceable filter |
Fuel system |
|
| Type | Gasoline |
| Fuel delivery | Open-loop electronic fuel injection (EFI) |
| Fuel gauge | Gauge on dash |
| Fuel tank location | Rear |
| Fuel fill opening | On left fender, 3 in.7.6 cm |
| Fuel tank capacity | 4.4 U.S. gal.16.7 L |
Electrical system |
|
| Battery | 12 V500 CCA |
| Charging system | Flywheel alternator, regulated, 15 amp |
| Engine starter | Solenoid shift |
| Hourmeter | Yes |
| Headlights | Two standard, incandescent, 27 W |
| Taillights or reflector | Reflectors |
| Backup lights | No |
| Rear work lights | No |
| 12-V outlet | Yes |
Transaxle |
|
| Type | K72 hydrostatic integrated with transaxle |
| Control | Twin Touch™ pedals |
| Cruise control | Yes, button on dash |
| Oil cooler | Fins and fan on transaxle |
| Oil filter | Yes, replaceable |
| Differential lock | Standard |
| Forward speed | 0-7.2 mph0-11.6 km/h |
| Reverse speed | 0-5.2 mph0-8.4 km/h |
| Brakes | Internal wet disc |
Chassis |
|
| Frame | Welded heavy-duty |
| Primer/paint | E-coat/powder |
| Weight bracket | Standard front and rear – each holds up to four Quik-Tatch weights, 42 lb19 kg |
| Receiver hitch | No |
| Front axle | Cast iron front axle, front wheel ball bearings |
| Spindle bushings | Metal, replaceable |
| Front tires | 16×6.5-8 turf |
| Rear tires | 24×12-12 HDAP |
| Hood material | Fully enclosed, molded-in color material reduces sound, will not rust or dent |
| Fender deck material | Stamped steel |
| Floor mats | Sure-grip rubber |
| Storage | Yes, under seat and covered toolbox |
| Service interval decal | Yes |
| Fender handles/grips | Handles |
| Cup holder | Yes |
| Equipment mounting | Yes, heavy duty |
Steering |
|
| Type | Power, hydraulic |
| Four-wheel steer | Not available on this model |
| Steering wheel | 14 in.35.6 cm |
| Tilt steering wheel | Standard, five position |
| Turning radius | 22 in.55.9 cm |
| Uncut circle radius | 24 in.61 cm |
Seat |
|
| Type | Cut-and-sewn high-back |
| Seat back height | 21 in.53 cm |
| Armrests | Optional |
| Fore-aft adjustment | While seated, slide rail, 15-position, 6.6 in.17 cm |
| Seat suspension | Tilt, two coil springs, three-position no-tools adjustment for operator weight |
Lift system |
|
| Type | Hydraulic |
| Hydraulic outlets | No |
| Mower cut height | 13 positions, 1-4 in.2.5-10.2 cm |
| Cut height increments | 0.25 in.0.64 cm |
| Preset cut height | Yes |
Mower deck |
|
| Type | Side discharge |
| Cutting width | Accel Deep™ mower deck, 54 in.137 cm |
| Construction | Stamped steel deck shell |
| Mower deck material | 10 gauge0.135 in.3.4 mm |
| Mower wash port | Yes |
| Mower drive system | Electric power take-off (PTO) clutch, in-line belt |
| Mower wheels | Four |
| Mower wheel adjustment | Seven-position, spring-loaded pin |
| Mower level adjustment | Exact Adjust ports and onboard deck-leveling gauge |
Mower attachability |
|
| Type | Roll under tractor |
| Front draft arms | Attached with spring pins at two points |
| Rear draft arms | Quick-pull pins |
| Mower wheels rotate | Yes, 90 degrees for easy mower removal |
| Drive system | Dual belt |
Safety |
|
| Meets ANSI standard | Yes |
| Meets OPEI standard | Yes |
| Backup protection | Reverse Implement Option (RIO) |
| Safety video | Yes |
Buyer’s notes |
|
| Notes | Heavy-duty garden tractor transaxleConvenient power steering and hydraulic liftBuilt-in front and rear weight brackets |
| Warranty | 4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Optional equipment |
|
| Mowers | 54A (standard) |
| Rear bagger | 7, 14, 19 bu247, 493, 670 L |
| Powered material collection | Power Flow™ blower |
| Mulching system | Yes, MulchControl™ |
| Front thatcher | 38, 46, 54 in.96.5, 116.8, 137.2 cm |
| Front blade | 48 in.121.9 cm |
| Snow blower | Two-stage, 47 in.119.4 cm |
| Rotary tiller | Mechanical, 30 in.76.2 cmHydraulic, 42 in.106.7 cm |
| Sleeve hitch | Yes, implements include box scraper, rear blade, plow, disk, and cultivator |
| Plow, moldboard | Yes |
| Box scraper | Yes |
| Cultivator | Yes |
| Rear blade | Yes |
| Sprayer | Tow-behind, 15, 25 U.S. gal.56.8, 94.6, 170.3 LMounted, 25 U.S. gal.94.6 L |
| Spreader | 125, 175 lb57.7, 79.4 kgMounted, 125 lb57.7 kg |
| Front bumper | Standard front bumper/weight bracket |
| Brush guard | Yes |
| Weather protection | Weather enclosure |
| Sun canopy | Yes |
| Bucket holder | Yes, double bucket |
| Grass striping | Lawn striping kit |
| Tractor shovel | 40 in.101.6 cm |
| Tow-behind tools | 19 |
Dimensions |
|
| Height | 52.25 in.132.7 cm |
| Overall length | 79 in.201 cm |
| Wheelbase | 51.2 in.130 cm |
| Width with mower | 68.4 in.174 cm |
| Width with mower (deflector raised for storage) | 59.4 in.151 cm |
| Width without mower | 41 in.104.1 cm |
| Weight | Mower, no fuel: 805 lb365 kg |
Additional information |
|
| Manufacturing location | Horicon, Wisconsin, USA |
| Date collected | 27-Jul-2020 |
John Deere X590 Review
The John Deere Zero-Turn Mower X590 is the top of the line zero-turn lawn mower. It is ideal for large lawns or demanding mowing situations. The 24.5 HP Kawasaki V-Twin Engine provides enough power to tackle even the most demanding tasks. For a full review, please check this YouTube video Here.
That’s all about the John Deere X590 specs ,Price, Review & Attachments,I hope you like it,but if you have any query regarding this article,then please comment below in the comment box.
I will solve your problem solution as soon and if you like it so please share with your friends and on social media,Thanks for visiting our site and stay tuned with me for more stuff like