John Deere 2940 Specs, Price, HP, Attachments Information
John Deere 2940 Specs: The John Deere 2940 is a utility tractor, that was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany. It was produced from 1980 to 1982 and had an Original price of $25,500 in 1982.
The tractor is powered by a John Deere 5.9L 6-cylinder diesel engine with a fuel tank capacity of 33.25 gallons. It has a 16-speed partial power shift transmission and can be operated in two- or four-wheel drive. The tractor has a drawbar horsepower of 68 and a claimed PTO Horsepower of 82. The Weight of the tractor is 9435 lbs.
Scroll down to learn more about the key Specs, price, weight, Horsepower, and details about the John Deere X739:
John Deere 2940 Specs
Production |
|
| Manufacturer | John Deere |
| Utility tractor | |
| Built in Mannheim, Baden-Württemberg, Germany | |
| Original Price: $25,500 in 1982 | |
John Deere 2940 Serial Numbers |
|
| Location: | Serial number plate on the front-right of the Deere 2940 frame, above the front axle. |
| 1980 | 350000 |
| 1981 | 390496 |
| 1982 | 418953 |
John Deere 2940 Engine |
|
| John Deere 5.9L 6-cyl diesel | |
| Fuel tank | 33.25 gal 125.9 L |
John Deere 2940 Transmission |
|
| 16-speed partial power shift |
John Deere 2940 Power |
|
| Drawbar (claimed) | 68 hp 50.7 kW |
| PTO (claimed) | 82 hp 61.1 kW |
| Drawbar (tested) | 64.18 hp 47.9 kW |
| PTO (tested) | 81.17 hp 60.5 kW |
John Deere 2940 Mechanical |
|
| Two- or four-wheel drive | |
| Final drives | planetary |
| Differential lock | mechanical rear |
| Power steering | |
| Differential hydraulic wet disc brakes | |
| Open operator station. Sound-Gard Cab optional. | |
John Deere 2940 Hydraulics |
|
| Type | closed center |
| Pressure | 2250 psi 155.1 bar |
| Valves | 2 |
| Pump flow | 23 gpm 87.1 lpm |
John Deere 2940 Tractor hitch |
|
| Rear Type | II |
| Control | position control and lower-link draft sensing |
| Rear lift (at 24″/610mm) | 2400 lbs 1088 kg |
John Deere 2940 Power Take-off (PTO) |
|
| Rear PTO | independent |
| Rear RPM | 540/1000 |
John Deere 2940 Dimensions & Tires |
|
| Wheelbase | 101.6 inches 258 cm |
| Weight | 9435 lbs 4279 kg |
| Front tire | 10.00-16 |
| 2WD Rear tire | 18.4-34 |
John Deere 2940 Electrical |
|
| Ground | negative |
| Battery volts | 12 |
Check here: John Deere 6120M
John Deere 2940 Engine Detail |
|
| John Deere | |
| diesel | |
| 6-cylinder | |
| liquid-cooled | |
| Displacement | 359 ci 5.9 L |
| Bore/Stroke | 4.19×4.33 inches 106 x 110 mm |
| Compression | 16.8:1 |
| Rated RPM | 2500 |
| Starter volts | 12 |
| Coolant capacity | 20 qts 18.9 L |
John Deere 2940 Transmission |
|
| Transmission | John Deere TSS High-Low |
| Type | partial power shift |
| Gears | 16 forward and 8 reverse |
| Four gears in two ranges, plus reverse range. Left-hand power shift between direct drive and lower range. | |
| Tires | 2WD Standard tires (ag) | 4WD Standard tires (ag) | 4WD Optional tires (ag) |
|---|---|---|---|
| Front | 10.00-16 | 12.4-28 | 13.6-24 |
| Rear | 18.4-34 | 16.9-38 | 18.4-34 |
Also, Check here: John Deere 6130M
John Deere 2940 Dimensions |
|
| Wheelbase | 101.6 inches 258 cm |
| Length | 164.9 inches 418 cm |
| Width | 90.3 inches 229 cm |
| Height (hood) | 67.1 inches 170 cm |
| Height (exhaust) | 113 inches 287 cm |
| Operating weight | 9435 lbs (4WD ROPS) 4279 kg |
| Ballasted weight | 10650 lbs 4830 kg |
| Clearance (front axle) | 25.6 inches 65 cm |
| Rack-and-pinion rear axle | |
| Front tread | 57 to 82.4 inches 144 to 209 cm |
| Front tread | 63 to 94 inches 160 to 238 cm (wide front) |
| Rear tread | 69 to 91 inches 175 to 231 cm |
John Deere 2940 Loader Attachments
| Attachment | Part Number |
|---|---|
| 4-in-1 Grapple Bucket | RE55440 |
| 4-Tine Fork | RE56321 |
| 5-Tine Fork | RE55789 |
| Backhoe | RE56987 |
| Bale Fork | RE55765 |
| Bucket | RE55432 |
| Landscape Rake | RE55753 |
| Manure Fork | RE55798 |
| Pallet Forks | RE55421 |
| Snow Blade | RE55876 |
| Thumb | RE55410 |
| Tree Bucket | RE55456 |
| Utility Bucket | RE55445 |