John Deere 1025r Specs, Price, Review & Attachments – 2022

John Deere 1025r Specs, Price, Review, Features, Attachments, Overview  

John Deere 1025r Sub compact tractor equipped with Yanmar® 3TNV80F-NCJT engine, which produces 23.9 hp at rated rpm 3200 rpm.

It’s best in class features such as 17.2 hp Power take-off (PTO) power, 344 kg Lift capacity, 24-in. behind link arms, Three cylinders, 24 L Fuel tank capacity, 344 kg Lift capacity, 24-in. behind link arms, etc.

John Deere 1025r Sub compact tractor attachments include  54″ mid-mount mower deck, 60″ mid-mount mower deck, Snowblower, Blade, Front-end loader and Backhoe.

Now, let’s check out the John Deere 1025r Price, Specs, Features, Attachments, Review and more information.

John Deere 1025r Specs, Price, Review, Attachments

John Deere 1025r Price

Price: $18,035.00USD

John Deere 1025r Horsepower

Horsepower: 23.9 hp

John Deere 1025r Tractor Key Features

  • Standard LED headlights and fender lights
  • Premium Operator Station with deluxe seat suspension and armrests
  • AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes

John Deere 1025r Tractor Attachments

  • 54″ mid-mount mower deck
  • 60″ mid-mount mower deck
  • Snowblower
  • Blade
  • Front-end loader
  • Backhoe

John Deere 1025r Specs

Key Specs
Engine power (gross) SAE J1995 rated power: 17.8 kW
23.9 hp
24.2 PS at 3200 rpm
Power take-off 12.8 kW
(PTO) power 17.2 hp
Steering hydraulics 13.2 L/min
3.5 gpm
Implement 13.2 L/min
hydraulics 3.5 gpm
Hitch type Limited Category 1
Lift capacity, 24-in. 344 kg
behind link arms 758 lb
Standard transmission; forward/reverse Hydrostatic – two range
Cruise control Standard
Approximate shipping weight (open-station; cab) Open station: 706 kg
1556 lb
Cab: 906 kg
1996 lb
Wheelbase 1450 mm
57.1 in.
Engine
Manufacturer Yanmar®
Engine model 3TNV80F-NCJT
Engine power (gross) SAE J1995 rated power: 17.8 kW
23.9 hp
24.2 PS at 3200 seconds
Power take-off (PTO) 12.8 kW
power 17.2 hp
Rated engine speed 3200 rpm
Type Diesel
Injection pump type Indirect injection
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement Three cylinders: 1.267 L
77.3 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 80 x 84 mm
3.15 x 3.31 in.
Compression ratio 23.1:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element with mechanical restriction indicator
Engine torque at rated speed 53.1 Nm
39.2 lb-ft
Fuel tank capacity 24 L
6.3 U.S. gal.
Electrical
Battery size 500 CCA
Alternator (12-V)

40 amp

Starter size 1.2 kW
1.6 hp
Fuel system
Type Indirect injection
Transmission
Standard transmission; forward/reverse Hydrostatic – two range
Left-hand reverser No
Final drive Spur gear
Brakes Wet disc (left-hand pedal)
Steering Power
Axle capacity Front
612 kg
1349 lb
Rear
715 kg
1576 lb
Creeper No
Cruise control Standard
Differential lock Yes
Hydraulics
Type Open center
Pump rated output Steering
13.2 L/min
3.5 gpm
Implement
13.2 L/min
3.5 gpm
24 L/min
6.3 gpm
Pump type Single gear
Maximum operating pressure 138 bar
2000 psi
Draft control sensing Position control
Remote control valves available Three
3-point hitch
Type Limited Category 1

Lift capacity, 24-in. behind link arms

344 kg
758 lb
Power take-off (PTO)
Standard Rear: 540 rpm
Mid: 2100 rpm
Control Independent
Clutch Wet disk
Brake (for mid and rear PTO) Wet disk
Fluid capacities
Crankcase with filter 2.7 L
2.9 qt
Transmission and hydraulic system 12.3 L
3.2 gal.
Final drive
Type Spur gear
Differential lock Yes
Operator station
Rollover protective structure Type
Foldable
Yes
Platform – flat/straddle One-piece semi flat
Gear shift location – console/floor Left-hand side
Cab
Air conditioning, temperature differential Heat only
Doors Two
Seat equipment Premium seat
Dimensions
Wheelbase 1450 mm
57.1 in.
Front axle 195 mm
clearance 7.7 in.
Turning radius without brakes Outside front tire: 2.51 m
8.2 ft
Limited slip differential No
Approximate shipping weight (open-station; cab) Open station: 706 kg
1556 lb
Cab: 906 kg
1996 lb
Tires
Front R3 Turf: 18×8.50-10R3 Turf Radial: 18×8.50-10R4: 18×8.5-10
Rear R3 Turf: 26×12-12R4: 26×12-12
Front tread range 931 mm36.7 in.
Rear tread spacing 895 mm35.2 in.
Miscellaneous
Toolbox Yes

John Deere 1025r Review Video

That’s all about the John Deere 1025r Specs, Price, Review & Attachments, I hope you like it, but if you have any query regarding this article, then please comment below in the comment box, I will solve your problem solution as soon and if you like it so please share with your friends and on social media,  Thanks for visiting our site and stay tuned with me for more stuff like.

Leave a Comment

16 + 5 =