DEUTZ-FAHR Agrofarm 430 Specs, Price, Review, Features
DEUTZ-FAHR Agrofarm 430 Specs, Price: The DEUTZ-FAHR Agrofarm 410/ Agrofarm420/ Agrofarm 430 range is available in a variety of configurations, with 2WD or 4WD and as platform or cab variants.
The DEUTZ-FAHR Agrofarm 430 is a medium-sized tractor that may be used for a range of agricultural assignments such as tillage, planting, and harvesting. Deutz Euro III 4-cylinder engines mix amazing smoothness and low noise emissions with excellent productivity and very low specific fuel loss figures.
The DEUTZ-FAHR Agrofarm tractors are designed with up to 4 hydraulic distributors (to a total of 8 ways); the first three distributors are managed from specific levers, while the fourth (with optional flow regulator) is electrohydraulically controlled.
DETZ-FAHR Agrofarm Tractors Advantages
- Ergonomic and spacious cab with
- excellent panoramic view
- Operating levers within easy reach
- Efficient heating and ventilation
- Optional Air conditioning
- implements with shaped, sloping bonnet
- Open-view roof simplifies
- front loader work
- Platform tractor with safe
- protective roof
- Low height to suit low building entrances
- Excellent view of front-mounted
DEUTZ-FAHR Agrofarm 430 Price
Price: 35,016 £ ex-VAT
DEUTZ-FAHR Agrofarm 430 Key Features
- DEUTZ diesel engine Type: TCD 2012 L 04
- Maximum power: 109 hp
- Cylinder: 4
- cubic capacity: 4038cc
- Maximum torque: 400 Nm
- Engine oil change interval: 500 h or every year
- Maximum lift capacity: 5,300, (6,200 opt) kg
- Wheelbase: 2,340 mm
- Ground clearance (with standard tires): 500 mm
DEUTZ-FAHR Agrofarm 430 Specifications
| ENGINE | |
| DEUTZ diesel engine | TD 2012 L 04 |
| Design | Turbo /liquid-cooled / high-pressure injection and intercooler |
| Maximum power (2000/25 EC)* | 80/109 kW/ hp |
| Speed rated | 2,100 rpm |
| Cylinders / cubic capacity | 4/4,038 No./ cm3 |
| Bore / stroke | 101/126 mm |
| Torque rise | 35 % |
| Maximum torque | 400 Nm |
| Constant torque range | 1,400-1,800 rpm |
| Constant power range | 1,800-2,300 rpm |
| Engine oil change interval | 500 h or every year** |
| Oil quantity/tank capacity | 9/160 L |
| Use of bio-diesel | Suitable for unrestricted use of fuel in accordance with DIN EN 14214 |
| CAB | |
| Design | Integrated cab, with noise insulation, exhaust on the side of the strut |
| Specification | Sun blind, tinted windows, wiper/washer unit at front and rear, rear cable access facility, working headlamp at front and rear, interior lighting, Grammer mechanical comfort seat (with air suspension on request) with seat belt |
| Ventilation | Heater with 3-speed fan |
| Air conditioning | Front and rear windows can be tilted, A/C system on request, opening roof window on request |
| Display | Non-glare information display with digital display showing vehicle speed, speed of front/rear PTO, powershift stages, operating hours, time, etc. |
| ELECTRICAL SYSTEM | |
| Voltage | 12V |
| Battery | 12/180/800 V/Ah /A |
| CHASSIS BRAKE STEERING | |
| Front differential lock | 100%, electrohydraulic activation |
| Rear differential lock | Electrohydraulic activation |
| 4-wheel drive operation | Mechanical, electrohydraulic on request |
| Service brake | Wet disc brake system on all 4 wheels |
| Steering system | Hydrostatic with separate pump (37l) |
| Steering angle /minimum turning circle | 55°/3.50 m |
| Trailer brake | Combined one /two line compressed air braking system on request |
| WORKING HYDRAULICS | |
| System/ oil reservoir | Open center/ shared with transmission |
| Pump flow rate | 54 (190) l/min (bar) |
| Available oil quantity | 20 l |
| HITCH | |
| Category of 3-point hitch, rear | II/fast coupler optional |
| Maximum lift capacity | 5,300, (6,200 opt) KG |
| Front hitch, cat. II | Integrated with folding lower links on request |
| Front hitch maximum lift capacity | 1,800 KG |
| HYDRAULIC REMOTE VALVE | |
| No. of remote valves | 2/3/4 on request |
| Non-pressurized recirculation | Standard |
| Version | Double-acting, mechanical actuation |
| TRANSMISSION | |
| Transmission V/R | 15/15 or 20/20 30/30 or 40/40 with Hi-Lo 40/40 Overspeed with Hi-Lo |
| Clutch actuation | Mechanical, electrohydraulic actuation via foot pedal and button on gear lever on request |
| Shuttle control | Mechanical with separate shifting lever on the left side, electrohydraulic Powershuttle on request |
| FRONT PTO | |
| Actuation | Electrohydraulic engagement |
| Speed | 1,000 RPM |
| Direction of rotation | Right in direction of travel |
| REAR PTO | |
| Actuation | Electrohydraulic; in the cab and on the two rear mudguards |
| Ground-speed PTO | With separate PTO stub shaft on request |
| PTO speeds | 540/540E /1,000/1,000E |
| Engine speed 540/540E /1,000/1,000E rpm | 2,080/1,630/2,280/1,780 |
| DIMENSIONS | |
| Wheel base | 2,340 MM |
| Length without lower link | 3,990 MM |
| Overall height with A/C* | 2,790 MM |
| Track widths | Adjustable wheel rims, track widths between 1,500 and 2,100mm possible depending on tires |
| Minimum width | 1,957 mm with 340/85 R 38 tires |
| Ground clearance (with standard tires) | 500 MM |
| Weights in kg (40km/ h, cab) | |
| Unladen weight (min-max) | |
| Front | 1,577 – 1,930 |
| Rear | 2,530 – 2,730 |
| Total | 4,107 – 4,660 |
| Permissible laden weight | |
| Maximum front axle load | 3,000 |
| Maximum rear axle load | 4,800 |
| Permissible total weight | 7,200 |
DEUTZ-FAHR Agrofarm 430 Tractor Review Video
I believe this information is sufficient for you to purchase or sell the new DEUTZ-FAHR Agrofarm 430 Tractor, but if you have any questions, please leave them in the comments below and I will respond as quickly as possible. Friends, thank you for visiting our website.
