Allis Chalmers 7060 Specs, Weight, Price & Review ❤️
Are you looking to buy Allis Chalmers 7060 Specs? But you need to know more about Allis Chalmers 7060 Specs Specifications, Weight, Price, and Review. In this post, you can find out more.
On the internet, it’s very hard to find accurate and detailed information about Allis Chalmers 7060 Specs, Weight, Price, and Reviews.
So, our team went to several Allis Chalmers 7060 Specs showrooms, got all the information, and put it all together in a way that is easy to read and understand.
Let’s look at the latest specs, weight, price, and review of the Allis Chalmers 7060 Specs.
Allis Chalmers 7060 Overview
The Allis Chalmers 7060 farm tractor model was created. From 1974 This same model cost 48,696 USD in the United States until 1981 with an Accousta cab basic cabin, and more than 7,796 vehicles were produced.
In terms of size and weight, this model has a wheelbase of 106 inches (269 cm), a ground clearance of 22 inches (55 cm), and measures 95.5 inches in width and 163 inches in length. It weighs 11,530 pounds or 5230 kg (front axle).
Ag tyres measuring 10.00×16 in front and 10.00×16 in back can fit on this tractor.
This Allis Chalmers 7060 is propelled by a diesel engine with a capacity of 51 gal (193.0 L) and a displacement of 426 ci (7.0 L) or 6 cylinders, which translates to 192 horsepower or 143.2 kW at 2300 (rpm).
Allis Chalmers 7060 Price & Weight
Price: $48,696
Weight: 20,560 lbs [9326 kg]
Allis Chalmers 7060 Specifications
Allis Chalmers 7060 Serial Numbers
| Location: | Above PTO shield |
| 1974: | 1001 |
| 1975: | 1299 |
| 1976: | 2749 |
| 1977: | 4582 |
| 1978: | 6001 |
| 1979: | 6789 |
| 1980: | 7693 |
| 1981: | 8442 |
| Final: | 9142 |
Allis Chalmers 7060 Production
| Manufacturer: | Allis Chalmers |
| Type: | Row-Crop tractor |
| Factory: | West Allis, Wisconsin, USA |
| Total built: | 7,796 |
| Original price: | $48,696 |
Allis Chalmers 7060 Power
| Power at rated engine speed: | 161.51 hp 120.4 kW |
| Fuel use: | 10.2 gal/hour 38.6 l/hour |
| Power at rated PTO speed: | 160.44 hp 119.6 kW |
| Fuel use: | 10.0 gal/hour 37.9 l/hour |
| Max power: | 136.12 hp 101.5 kW |
| Fuel use: | 10.0 gal/hour 37.9 l/hour |
| Max pull: | 17,370 lbs 7879 kg |
Allis Chalmers 7060 Engine Detail
| Displacement: | 426 ci 7.0 L |
| Bore/Stroke: | 4.25×5.00 inches 108 x 127 mm |
| Power: | 192 hp 143.2 kW |
| Air cleaner: | dry with pre-cleaner |
| Compression: | 16:1 |
| Rated RPM: | 2300 |
| Firing order: | 1-5-3-6-2-4 |
| Starter volts: | 12 |
| Coolant capacity: | 32 qts 30.3 L |
| Intake valve clearance: | 0.015 inches 0.381 mm (hot) |
| Exhaust valve clearance: | 0.015 inches 0.381 mm (hot) |
Allis Chalmers 7060 Mechanical
| Chassis: | 4×2 2WD |
| Final drives: | inboard planetary |
| Steering: | hydrostatic power |
| Brakes: | differential power wet disc |
| Cab: | Accousta cab standard, A/C optional. Accousta cab II available in 1978. |
| Transmissions: | 20-speed partial power shift |
| 12-speed partial power shift |
Allis Chalmers 7060 Transmission
| Transmission: | Allis-Chalmers Power Director |
| Type: | partial power shift |
| Gears: | 20 forward and 4 reverse |
| Oil capacity: | 29.6 qts 28.0 L |
| Oil type: | Allis-Chalmers Power Fluid 821 |
Allis Chalmers 7060 Hydraulics
| Type: | closed center |
| Valves: | 2 or 3 |
| Pump flow: | 22 gpm 83.3 lpm |
| Total flow: | 45 gpm 170.3 lpm |
| Steering flow: | 9.5 gpm 36.0 lpm |
Allis Chalmers 7060Tractor Hitch
| Rear Type: | 3/2 |
| Rear lift (at 24″/610mm): | 6,680 lbs 3030 kg |
Allis Chalmers 7060 Power Take-off (PTO)
| Rear PTO: | independent |
| Rear RPM: | 1000 |
| 540/1000 (optional) |
Allis Chalmers 7060 Tires
| Ag front: | 11.00×16 |
| Ag rear: | 18.4×38 |
| Ag front: | 10.00×16 |
| 14Lx16 | |
| Ag rear: | 23.1×30 |
| 24.5×32 | |
| 30.5×32 | |
| 15.5×38 | |
| 16.9×38 | |
| 20.8×38 | |
| 18.4×42 |
Allis Chalmers 7060 Dimensions
| Wheelbase: | 106 inches 269 cm |
| Length: | 163 inches 414 cm |
| Width: | 95.5 inches 242 cm |
| 119.5 inches 303 cm (optional long axle) |
|
| Ground clearance: | 22 inches 55 cm (front axle) |
| 28 inches 71 cm (rear axle) |
|
| Rear axle: | 3.75 inch diameter 95 mm |
| Rear axle: | 4.00 inch diameter 101 mm |
Allis Chalmers 7060 Height
| Steering wheel: | 87 inches 220 cm |
| Hood: | 69 inches 175 cm |
| Exhaust: | 117 inches 297 cm |
Allis Chalmers 7060 Weight
| Shipping: | 11,530 lbs 5230 kg |
| Operating: | 13,990 lbs 6345 kg (Power Director) |
| 14,645 lbs 6642 kg (Power shift) |
|
| Ballasted: | 20,560 lbs 9326 kg |
Allis Chalmers 7060 Electrical
| Ground: | negative |
| Batteries: | 2 |
| 4 (optional) | |
| Battery volts: | 12 |
Allis Chalmers 7060 Review
Because of its strength, ease of use, and longevity, farmers and ranchers favor the 7060 tractor. It works well for many different jobs, such as planting, harvesting, disking, and plowing. For a full review, please check this YouTube video Here.
Final Word Allis Chalmers 7060
Allis Chalmers 7060 Tractor Price, Specs, Review, and Key Features, that’s all. If you have any questions, though, feel free to leave a note below in the comment box, and we’ll get back to you as soon as we can. Thanks for stopping by, and keep checking back for more fresh content like this.
FAQs For Allis Chalmers 7060
What is the most popular Allis-Chalmers tractor?
After the Model W was improved to make it suitable for cultivating, Allis-Chalmers created the WC. The Model WC became the most popular tractor ever produced by Allis-Chalmers by capitalising on the success of the company’s 1932 introduction of rubber tyres to agriculture.
What is the most sold tractor of all time?
The low-cost Fordson machine began operating in the first period, which began in 1917. With approximately 740,000 Fordsons sold throughout its 11-year production run, the tractor became the most well-liked one ever produced.
Can you still get parts for Allis-Chalmers?
Old Allis-Chalmers tractors can be repaired with a variety of tractor parts available from Steiner Tractor Parts. We have the tractor parts you need, whether you want to fix or restore your vintage Allis-Chalmers!
Who made Allis-Chalmers engines?
The Edward P. Allis Company gradually grew into a manufacturer of steam engines, and by 1900 it was one of the biggest in the country. Charles and William Allis, Mr. Allis’s sons, took over the management of the business after his death in 1889.
Why did Allis-Chalmers stop making tractors?
In the 1980s, the company experienced financial problems and was forced to sell many of its commercial divisions. A little under 140 years after E.P. Allis’ initial entry into Milwaukee’s industrial boom, Allis-Chalmers permanently shuttered its doors in 1999.