Allis Chalmers 6080 Specs, Weight, Price & Review ❤️

If you want to purchase an Allis Chalmers 6080 Specs but are unsure of its specifications, weight, price, or review, I have provided information in this post.

Complete and detailed information on the Allis Chalmers 6080 Specs, Weight, Price & Review has been gathered by our team.

With associates and representatives of Allis Chalmers 6080 Specs, we validated this information. We’ll look at the Allis Chalmers 6080 Specs, Weight, Price, and a thorough evaluation in this article.

Allis Chalmers 6080

Allis Chalmers 6080 Overview

The Allis Chalmers 6080 is a row-crop tractor from the 6000 series that comes in 2WD or 4WD. From 1980 until 1985, Allis Chalmers produced this tractor in West Allis, Wisconsin, in the United States.

The 3.3 L (200.0 cu in) four-cylinder diesel engine and synchronised transmission of the Allis Chalmers 6080 have 12 forward and 3 reverse gears, respectively.

Allis Chalmers 6080 Price & Weight

Price: $30,000 (1985)

Weight:  6,500 lbs 2948 kg

Allis Chalmers 6080 Specifications 

Allis Chalmers 6080 Production

Manufacturer:Allis Chalmers
Type:Row-Crop tractor
Factory:West Allis, Wisconsin, USA
Total built:6,698
Original price:$30,000 (1985)

Allis Chalmers 6080 Power

Drawbar (tested):70.50 hp
52.6 kW
PTO (tested):83.66 hp
62.4 kW

Allis Chalmers 6080 Mechanical

Chassis:4×2 2WD
 4×4 MFWD 4WD (optional)
Steering:hydrostatic power
Brakes:differential hydraulic wet disc
Cab:Four-post ROPS canopy. Optional cab and air-conditioning.
Transmission:12-speed synchronized

Allis Chalmers 6080 Engine Detail

Displacement:200 ci
3.3 L
Bore/Stroke:3.876×4.25 inches
98 x 108 mm
Air cleaner:paper element with pre-cleaner
Compression:14.1:1 (early)
 15.5:1 (late)
Rated RPM:2300
Starter volts:12
Oil capacity:10 qts
9.5 L
Coolant capacity:17 qts
16.1 L

Allis Chalmers 6080 Capacity

Fuel:32 gal
121.1 L
Rear diff.:37 qts
35.0 L

Allis Chalmers 6080 Hydraulics

Type:open center
Valves:2
Pump flow:11.4 gpm
43.1 lpm
Total flow:19 gpm
71.9 lpm

Allis Chalmers 6080 Tractor Hitch

Rear Type:II
Rear lift (at 24″/610mm):4,500 lbs
2041 kg

Allis Chalmers 6080 Power Take-off (PTO)

Rear PTO:independent
Rear RPM:540/1000

Allis Chalmers 6080 Dimensions & Tires

Wheelbase:96 inches
243 cm (2WD)
 95.3 inches
242 cm (4WD)
Weight:6,500 lbs
2948 kg
Front tire:7.50-16
Rear tire:18.4-34

Allis Chalmers 6080 Serial Numbers

Location:engine adapter housing, right side
1980:1001
1981:1152
1982:3002
1983:4567
1984:5780
1985:6853
Final:7698

Allis Chalmers 6080 Electrical

Charging system:alternator
Charging amps:72
Batteries:1
 2 (optional)
Battery volts:12

Allis Chalmers 6080 Review

A tractor of 125 horsepower, the Allis Chalmers 6080 was manufactured between 1980 and 1985. Due to its dependability, fuel efficiency, and versatility, this tractor is well-liked by both farmers and collectors. For a full review, please check this YouTube video Here.

Allis Chalmers 6080 Conclusion

That covers all the details you need to know about the Allis Chalmers 6080 price, specifications, review, attachments, and features.You now have all the information you need about the Allis Chalmers 6080’s price, features, specifications, review, and attachments.

FAQs For Allis Chalmers 6080

When did Allis-Chalmers go out of business?

Additionally, it surpassed both 3M and Coca-Cola in size. However, Allis-Chalmers had sold off most of its key business divisions by the late 1980s and had totally shut down in 1999.

What does the WC stand for on an Allis-Chalmers tractor?

The Model W version designed specifically for cultivating was the WC, hence the name W + C (for “cultivating”). Later, further W variations like the WD and WF appeared (in lower numbers). Due to its excellent value, reasonable cost, and economical design features, the WC enjoyed popularity during the Great Depression.

What is an Allis-Chalmers 6080 used for?

The introduction of the Allis-Chalmers Model “B” at the end of the 1930s revolutionised tractor design. It was the first compact, lightweight, affordable tractor with sufficient power to complete plow, cultivate, and harvest tasks.

What was the biggest tractor Allis-Chalmers made?

It was about 12 feet tall and almost 19 feet long. Although it may not seem like much now, that was a sizable tractor in 1976! Before its larger brother debuted in 1977, this was Allis Chalmers’ first internal big horse and the largest tractor they had ever produced.

Can you still get parts for Allis-Chalmers?

Old Allis-Chalmers tractors can be repaired with a variety of tractor parts available from Steiner Tractor Parts. We have the tractor parts you need, whether you want to fix or restore your vintage Allis-Chalmers.

Subscribe
Notify of
guest

0 Comments
Inline Feedbacks
View all comments