Allis Chalmers 5040 Specs, Weight, Price & Review ❤️

Allis Chalmers 5040 Specs, Weight, Price & Review ❤️


If you want to purchase an Allis Chalmers 5040 Specs but are unsure of its specifications, weight, price, or review, I have provided information in this post.

Complete and detailed information on the Allis Chalmers 5040 Specs, Weight, Price & Review has been gathered by our team.


With associates and representatives of Allis Chalmers 5040 Specs, we validated this information. We’ll look at the Allis Chalmers 5040 Specs, Weight, Price, and a thorough evaluation in this article.

Allis Chalmers 5040

About Allis Chalmers 5040 

Between 1976 and 1980, UTB/Universal For Allis Chalmers produced the Allis Chalmers 5040 2WD utility tractor in Brasov, Romania. A 2.3L (142.8 cu*in), three-cylinder diesel engine powers the Allis Chalmers 5040.


It also has one of three transmissions: a partially synchronized gearbox with a dry disc clutch and 6 forward or 2 reverse gears, a partially synchronized transmission with a dry disc clutch and 8 forward or 2 reverse gears, or a partially synchronized transmission with both of these options.


The Allis Chalmers 5040 utility tractor uses the Usina engine. It had a three-cylinder, naturally aspirated, 2.3L, 2,340 cm2 (142.8 cubic inch) diesel engine.

The piston stroke is 100.0mm, while the cylinder bore is 95.0mm (3.74in) (3.94in). This engine is rated for a 17.0 to 1 compression ratio. The engine’s PTO output power was 40.5 PS (29.8 kW; 40.0 HP).

The Allis Chalmers 5040 has an open operator station, mechanical band brakes, and power steering (optional). The gasoline tank has a capacity of 53.9 Liters (14.2 US gal; 11.9 Imp. gal).

Allis Chalmers 5040 Price & Weight

 Weight:  1,750 kg (3,858 lbs) 

Price:   $9,823


Allis Chalmers 5040 Specifications 

Allis Chalmers 5040 Production

Distributor Allis Chalmers
Manufacturer USB/Universal
Original price $9,823

Allis Chalmers 5040 Engine

Displacement 142.8 ci
2.3 L
Bore/Stroke 3.74×4.33 inches
95 x 110 mm
Fuel system direct injection
Air cleaner dry
Pre-heating thermostat
Compression 17:1
Rated RPM 2400 (early)
  2600 (late)
Starter volts 12
Oil Capacity 8.3 qts
7.9 L
Coolant capacity 14 qts
13.2 L

Allis Chalmers 5040 Transmission

Transmission partially synchronized
Gears 6 forward and 2 reverse
Clutch 254mm dry disc
Oil Capacity 19 qts
18.0 L

Allis Chalmers 5040 Dimensions

Wheelbase 74.2 inches  188 cm
Length 116 inches   294 cm
Width 61 inches  154 cm
Shipping weight 3850 lbs   1746 kg
Clearance (front axle) 18.5 inches  46 cm
Clearance (rear axle) 20 inches  50 cm
Front tread 51 to 78 inches  129 to 198 cm
Rear tread 52 to 75 inches   132 to 190 cm

Allis Chalmers 5040 Height 

Steering wheel 58.6 inches
148 cm
Hood 53 inches
134 cm
Exhaust 76.5 inches
194 cm

Allis Chalmers 5040 Power

PTO (claimed) 40 hp
29.8 kW

Allis Chalmers 5040 Capacity

Fuel 14.25 gal
53.9 L
Hydraulic system 4.75 gal
18.0 L

Allis Chalmers 5040 Hydraulics 

Type open center
Capacity 4.75 gal
18.0 L
Valves 1
Total flow 5.75 pm (early)
21.8 pm
  6.23 GPM (late)
23.6 pm

Allis Chalmers 5040 Tractor Hitch 

Rear Type II/I
Control position control and top-link draft sensing
Rear lift 2645 lbs
1199 kg

Allis Chalmers 5040 Power Take-off (PTO)

Rear PTO continuous *
Rear RPM 540 (1.375)
Engine RPM 540@1970

Allis Chalmers 5040 Tires

Ag front 6.00-16
Ag rear 13.6-28

Allis Chalmers 5040 Features

  • The first tractor with power steering and a diesel engine was the Allis Chalmers 5040
  • The Allis Chalmers 5040 tractor outperforms its rivals in terms of horsepower during production.
  • The row-crop tractor has a narrow front end and is designed to work with a variety of equipment.
  • If properly maintained, the Allis Chalmers 5040 tractor operates quietly and for a very long time.

Final Words Allis Chalmers 5040

In order to protect tractor operators during a rollover, this research looked into the ROPS design for tractors. The SAE J2194 ROPS static standard tests have proved that the CRDP is effective in designing ROPS that pass them. The ROPS designs have been validated through static laboratory performance testing based on SAE J2194.

It has been demonstrated that foldable ROPS lift aids can successfully reduce the actuation forces needed to raise a ROPS by about 50% and to within the OECD Code 7 recommended forces. To ascertain the impact of the tractor center of gravity (CG) height on the crucial ROPS height, a continuous tractor roll model was used (CRH).

The model predicts that a continuous roll is more likely to occur when the CG height is higher, necessitating a caller according to the model, a continuous roll is more likely to occur at higher CG heights, necessitating a higher ROPS height to stop the roll. These findings can be used for future ROPS designs and operator safety for agricultural tractors.

FAQs For Allis Chalmers 5040

What is the most popular Allis-Chalmers tractor?

The Model W was altered to make it more suitable for cultivation, and Allis-Chalmers then created the WC. Building on the success of their 1932 introduction of rubber tires to agriculture, Allis-Chalmers produced the Model WC, which went on to become their best-selling tractor ever.

What is the most reliable tractor ever made?

The John Deere brand is the most esteemed and sought-after tractor manufacturer in the world and is well-known on a global scale. With a reputation built up over 183 years, John Deere provides the highest level of dependability for any business.

What is the most-sold tractor of all time?

The low-cost Fordson machine began operating in the first period, which began in 1917. With nearly 740,000 Fordsons sold during its 11-year production run, that tractor became the most well-liked one ever produced.

Was Allis-Chalmers a good tractor?

2021 December The Allis-Chalmers 8000 series tractors were, in my opinion, among their best mid-range tractors. True, some models had problems, but all in all, they were reliable machines. Having said that, they ALL had a fatal flaw: poor timing.

Notify of

Inline Feedbacks
View all comments