TATA Hitachi TH 76 Backhoe Loader Price, Specifications & Features
TATA Hitachi TH 76 Backhoe Loader Price in India 2024, Specification, Overview
Guys!! Are you thinking to buy TATA Hitachi TH 76 Backhoe Loader? And do you want to know about the Price, Key features, Hydraulic system, Transmission system, Axles, images, and more? if yes, then don’t worry my friends, cause Here in this article of mine, I am going to present all kinds of information which you need to know about it.
The TATA Hitachi TH 76 Backhoe Loader some main features such as Reinforced for Longer life, Rain forced Link for stronger, Havey duty excavator type arm, Clutchless gear shifting for easy to drive, Cyclonic air pre-cleaner for low maintenance, Reinforced loader bucket for longer life, Bolt-on type tooth point for easy to change, Adjustable wear pads for precise excavator movement. It’s more information you can check in the below specification table friends.
You May also like to check:
- TATA Hitachi TMX20
- TATA Hitachi TL 360 Z Wheel Loader
- TATA Hitachi TH 86 L Wheel Loader
- TATA Hitachi TH 86 Backhoe Loader
- TATA Hitachi ZW 220 Wheel Loader
- TATA Hitachi TWL 3034 Wheel Loader
- TATA Hitachi ZAXIS 220 LC-M
- TATA Hitachi TH 76 Backhoe Loader
- TATA Hitachi EH 5000AC-3 Dump Truck
- TATA Hitachi 80 GI Series Construction Excavators
TATA Hitachi TH 76 Backhoe Loader Price in India
The TATA Hitachi TH 76 Backhoe Loader Price starts at 10 Lakh. And for any inquiry please contact us on this toll-free number 1800 3456 500.
You may also read: TATA Hitachi TH 86 Backhoe Loader.
TATA Hitachi TH 76 Backhoe Loader Quick Facts
- Model Code: TH 76
- Engine Power: 76 PS
- Operating Weight: 7350 kg
- Bucket Capacity: Backhoe: 0.09 – 0.25 m3 | Loader: 1 m3
- BS III compliant, 4 Cylinder, water-cooled, Turbocharged engine
TATA Hitachi TH 76 Backhoe Loader Specifications
| ENGINE | |
| Make & Model | TATA 497 TCIC |
| Type | Turbo-Charged, Inter-Cooled 4 Cylinder Diesel Engine |
| Gross Power | 76 PS @ 2200 rpm |
| Max.Torque | 28 kg-m @ 1300-1700 rpm |
| Battery | 12 V-130 AH |
| TRANSMISSION | |
| TH 76 is provided with a fully Powershift transmission sourced from the internationally renowned ZF, with heavy-duty clutch packs for the smooth and easy gear shift. | |
| The integral Torque converter has stall ratio of 1:2.63 which increases the tractive effort, making dozing operation easy in tough conditions. Powershift transmission facilitates “on the move clutchless gear shift” through the click of the knob both in forward and reverse direction. | |
| TURNING RADIUS 2WD | |
| Curb turning circle: | |
| With brakes | 7140 mm |
| Without brakes | 8808 mm |
| Bucket clearance circle | |
| With brakes | 9610 mm |
| Without brakes | 10500 mm |
| REFILL CAPACITY | |
| Fuel tank (with ground level fueling) | 136.0 ltr |
| Engine coolant | 21.9 ltr |
| Engine oil including filter | 9.0 ltr |
| Transmission | 13.0 ltr |
| Hydraulic system | 91.0 ltr |
| Rear axle | 16.0 ltr |
| TYRES | |
| Front Tyres (standard) | 9-16, 16 PR |
| Rear Tyres | |
| (standard)…Industrial tyres | 16.9-28, 12 PR |
| (standard)…Heavy duty tyres | 14-25, 20 PR |
| AXLE | |
| Front Axle | The rigid non-powered front axle for two-wheel drive version can float 18Deg. to take care of unevenness of the ground. |
| Rear Axle | Rear ZF Multitrac Axle is a heavy duty, long-life axle |
| TRAVEL SPEEDS | ||
| Travel speeds with the standard rear center. (16.9-28, 12 PR) | ||
| Forward | Reverse | |
| Gear 1 | 6 kmph | 7 kmph |
| Gear 2 | 10 kmph | 13 kmph |
| Gear 3 | 21 kmph | |
| Gear 4 | 36 kmph | |
| BUCKETS | |||
| Loader End | Width | Capacity | Weight |
| Tilt dump bucket | 2346 mm | 1.00 m3 | 522 kg |
| Backhoe End | Width | Capacity | Weight |
| General purpose bucket | 711 mm | 0.25 m3 | 193 kg |
| Heavy-duty bucket | 610 mm | 0.22 m3 | 180 kg |
| Loader Performance | Bucket Types | |
| Tilt Dump Bucket | Bottom Dump (6-in-1) Bucket | |
| Break force | 4140 kgf | 3765 kgf |
| Lifting capacity, full height | 2790 kg | 2631 kg |
| Height to bucket hinge pin, maximum | 3400 mm | 3400 mm |
| . Dump clearance, bucket at 45Deg. | 2640 mm | 2620 mm |
| Bucket dump angle, maximum | 45Deg. | 45Deg. |
| Reach at full height, bucket at 45deg. | 765 mm | 818 mm |
| Rollback angle at ground level | 40Deg. | 40Deg. |
| Digging depth below ground, bucket level | 206 mm | 185 mm |
| Max. Operating height | 3820 mm | 3820 mm |
| Backhoe Performance | Boom Length: 2.56 m |
| Digging force, bucket cylinder : 5300 kgf Digging force, arm cylinder : 3200 kgf | *Arm Length 1.72 m |
| Loading height, truck loading position | 3560 mm |
| Max. Reach from the center of swing point at a ground | 5415 mm |
| Reach from center of rear axle | 6841 mm |
| Maximum digging depth | 4248 mm |
| Digging depth | |
| (E1) 610 mm flat bottom | 4200 mm |
| (E2) 2440 mm flat bottom | 3890 mm |
| Ground clearance, minimum | 350 mm |
| Bucket rotation | 184 deg. |
| Transport height | 3670 mm |
| Overall length, transport | 5210 mm |
| Side-shift from tractor centerline | 532 mm |
| Wall to swing center line | 580 mm |
| Stabilizer width | 2235 mm |
| Lift capacity to bucket pivot | 1699 kg |
| Maximum cutting height: | |
| (stab. full open) | 5750 mm |
| (stab. closed) | 5250 mm |
| Total side shift travel | 1050 mm |
| Max. side reach (with side shift) from center of machine | 5878 mm |
Final Words for TATA Hitachi TH 76 Backhoe Loader
I hope you like this TATA Hitachi TH 76 Backhoe Loader construction equipment post but if you have any questions about this article, then please comment below in the comment box my friends, we will solve your problem as soon as possible. And stay with me for new Construction machinery information.
You can also check The TATA Hitachi Construction Machinery’s other model information on our site. Thanks for visiting our site friends.
