0

Massey Ferguson 8700 Series Tractors Technical Specifications

Welcome, Friends!! I am here your tractor guide here as usual, and today I am going to represent the MF8700 series each only tractor information; You can check below information like Price list, Specification, Key Feature and Photos.

The Massey Ferguson 8700 Series is our next generation of tractors. They’re highly dependable, no-nonsense, low-maintenance tractors that are built to work the same way you do.

You can see in this post, this model information like MF8727, MF8730, MF8732, MF8735, MF8737, Ok Friends, Let’s start it.


Top Ten New features of This MS 8700 Series Tractors

  1. AGCO POWER 8.4L 6-cylinder engine, simply designed for total fluid efficiency
  2. Twin turbos provide sustainable torque at low RPMs with quick response
  3. Engine Power Management system to increase performance
  4. High-capacity CYCLAIR cooling package that’s 33% more efficient
  5. Hood styling for improved airflow
  6. Front 3-point hitch and PTO provide maximum versatility
  7. Easy-to-read front dash display and ergonomic B-pillar controls
  8. Light package for better visibility in demanding applications
  9. Hydraulic system with increased flow
  10. Front monobloc weight for greater versatility and easy ballast management

 

                     Massey Ferguson 8727 Tractor

 massey-ferguson-8727-tractor

 

Massey Ferguson 8727 Tractor Key Features

  • Engine Model: AGCO POWER™ 8.4L
  • Transmission: Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
  • Hydraulic System: Closed center load sensing (CCLS)
  • Maximum Horsepower: 270HP
  • PTO HP: 205HP
  • Rear Lift Capacity @ link ends: 26,455lbs
  • Fuel Tank Capacity: 630Ltr.

 

Massey Ferguson 8727 Tractor Price

The Massey Ferguson 8727 Tractor Price is $280,215.

 

Massey Ferguson 8727 Tractor Specs

ENGINE PERFORMANCE
Maximum ISO engine HP @ 2,000 engine RPM (kW) 270 (199)
ISO engine HP @ 2,100 rated engine RPM (kW) 240 (177)
PTO HP @ 2,100 rated engine RPM (kW) 205 (151)
Type — standard AGCO POWER™ 8.4L
Number of cylinder 6
Displacement liters (CID) 8.4 (514)
Aspiration Twin Turbo Chargers with eWastegate
Alternator / battery (standard) 240 amps / 12 V (twin 120 amp alternators)
TRANSMISSION SYSTEM
Type Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
Field speed range 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse)
Road speed range 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse)
Road speed range — 40 kph — optional Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse)
Speeds forward Infinite
Cruise control speeds 4
REAR AXLE
4.33 x 118 in. (110 x 2,999 mm) long axle Standard
4.33 x 105 in (110 x 2,550 mm) short axle Optional
Differential lock — full-locking, electrohydraulic Standard
FRONT AXLE
4-wheel drive differential lock Standard – full-locking, electrohydraulic
4-wheel drive maximum steering angle 55º
3 POINT HITCH REAR
Category 3/4N Quick Hitch Standard
Maximum lift capacity — At Link Ends lbs. (kg) 20,345 (9,228)
3-POINT HITCH – FRONT (OPT.)
Category 3 Standard
Maximum lift capacity — At Link Ends lbs. (kg) 10,970 (4,976)
DRAWBAR
Category 3 with drop pin Standard
Category 3 heavy duty with drop pin Optional
Category 4 with drop pin Optional
PTO
Speeds RPM — standard 1,000 / 1,000E
Shaft diameter in. (mm) 1.75 in. (45 mm) shaft, 20 spline
HYDRAULICS
System type Closed Center Load Sensing (CCLS)
Total flow rate US gallon (L) 54 (205)
Maximum pressure PSI (bar) 2,900 (200)
Remote Valves — Standard/Optional Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves
OPERATOR AREA
Cab glass area ft2 (m2) 67.3 (6.22)
Noise level dB(A) 71
OptiRide Plus hydraulic suspended cab Standard
Operator seat — air suspension Standard
Control Center Display (CCD) Standard
TECHNOLOGY
Auto-Guide 3000 Standard
AgCommand AgCommand ready standard, subscription optional
DIMENSION& WEIGHT*
Wheelbase in. (mm) 122 (3,100)
Overall length-front wt. frame to rear link arms in. (mm) 218.6 (5,552)
Maximum height over cab in. (mm) 141 (3,584)
Approx. shipping weight lbs. (kg) 23,810 (10,800)
Maximum allowable weight lbs. (kg) 33,070 (15,000)
Fuel CAPACITY
Fuel tank capacity US gallon (L) 166 (630)
DEF (AdBlue) usable tank capacity US gallon (L) 15.8 (60)
 

 

                    Massey Ferguson 8730 Tractor

 
massey-ferguson-8730-tractor

Massey Ferguson 8730 Tractor Key Features

  • Engine Model: AGCO POWER™ 8.4L
  • Transmission: Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
  • Hydraulic System: Closed center load sensing (CCLS)
  • Maximum Horsepower: 300HP
  • PTO HP: 225HP
  • Rear Lift Capacity @ link ends: 26,455lbs
  • Fuel Tank Capacity: 630Ltr.

 

Massey Ferguson 8730 Tractor Price

The Massey Ferguson 8730 Tractor Price is $249,500. 

 


Massey Ferguson 8730 Tractor Specs

ENGINE PERFORMANCE
Maximum ISO engine HP @ 2,000 engine RPM (kW) 295 (220)
ISO engine HP @ 2,100 rated engine RPM (kW) 265 (198)
PTO HP @ 2,100 rated engine RPM (kW) 225 (168)
Type — standard AGCO POWER™ 8.4L
Number of cylinder 6
Displacement liters (CID) 8.4 (514)
Aspiration Twin Turbo Chargers with eWastegate
Alternator / battery (standard) 240 amps / 12 V (twin 120 amp alternators)
TRANSMISSION SYSTEM
Type Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
Field speed range 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse)
Road speed range 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse)
Road speed range — 40 kph — optional Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse)
Speeds forward Infinite
Cruise control speeds 4
REAR AXLE
4.33 x 118 in. (110 x 2,999 mm) long axle Standard
4.33 x 105 in (110 x 2,550 mm) short axle Optional
Differential lock — full-locking, electrohydraulic Standard
FRONT AXLE
4-wheel drive differential lock Standard – full-locking, electrohydraulic
4-wheel drive maximum steering angle 55º
3 POINT HITCH REAR
Category 3/4N Quick Hitch Standard
Maximum lift capacity — At Link Ends lbs. (kg) 20,345 (9,228)
3-POINT HITCH – FRONT (OPT.)
Category 3 Standard
Maximum lift capacity — At Link Ends lbs. (kg) 10,970 (4,976)
DRAWBAR
Category 3 with drop pin Standard
Category 3 heavy duty with drop pin Optional
Category 4 with drop pin Optional
PTO
Speeds RPM — standard 1,000 / 1,000E
Shaft diameter in. (mm) 1.75 in. (45 mm) shaft, 20 spline
HYDRAULICS
System type Closed Center Load Sensing (CCLS)
Total flow rate US gallon (L) 54 (205)
Maximum pressure PSI (bar) 2,900 (200)
Remote Valves — Standard/Optional Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves
OPERATOR AREA
Cab glass area ft2 (m2) 67.3 (6.22)
Noise level dB(A) 71
OptiRide Plus hydraulic suspended cab Standard
Operator seat — air suspension Standard
Control Center Display (CCD) Standard
TECHNOLOGY
Auto-Guide 3000 Standard
AgCommand AgCommand ready standard, subscription optional
DIMENSION& WEIGHT*
Wheelbase in. (mm) 122 (3,100)
Overall length-front wt. frame to rear link arms in. (mm) 218.6 (5,552)
Maximum height over cab in. (mm) 141 (3,584)
Approx. shipping weight lbs. (kg) 23,810 (10,800)
Maximum allowable weight lbs. (kg) 33,070 (15,000)
Fuel CAPACITY
Fuel tank capacity US gallon (L) 166 (630)
DEF (AdBlue) usable tank capacity US gallon (L) 15.8 (60)
 

 

 

                  Massey Ferguson 8732 Tractor

 
massey-ferguson-8732-tractor

Massey Ferguson 8732 Tractor Key Features

  • Engine Model: AGCO POWER™ 8.4L
  • Transmission: Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
  • Hydraulic System: Closed center load sensing (CCLS)
  • Maximum Horsepower: 320HP
  • PTO HP: 250HP
  • Rear Lift Capacity @ link ends: 26,455lbs
  • Fuel Tank Capacity: 630Ltr.

 

Massey Ferguson 8732 Tractor Price

The Massey Ferguson 8732 Tractor Price is $264,000.

 

Massey Ferguson 8732 Tractor Specs

ENGINE PERFORMANCE
Maximum ISO engine HP @ 2,000 engine RPM (kW) 320 (239)
ISO engine HP @ 2,100 rated engine RPM (kW) 290 (216)
PTO HP @ 2,100 rated engine RPM (kW) 250 (186)
Type — standard AGCO POWER™ 8.4L
Number of cylinder 6
Displacement liters (CID) 8.4 (514)
Aspiration Twin Turbo Chargers with eWastegate
Alternator / battery (standard) 240 amps / 12 V (twin 120 amp alternators)
TRANSMISSION SYSTEM
Type Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
Field speed range 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse)
Road speed range 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse)
Road speed range — 40 kph — optional Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse)
Speeds forward Infinite
Cruise control speeds 4
REAR AXLE
4.33 x 118 in. (110 x 2,999 mm) long axle Standard
4.33 x 105 in (110 x 2,550 mm) short axle Optional
Differential lock — full-locking, electrohydraulic Standard
FRONT AXLE
4-wheel drive differential lock Standard – full-locking, electrohydraulic
4-wheel drive maximum steering angle 55º
3 POINT HITCH REAR
Category 3/4N Quick Hitch Standard
Maximum lift capacity — At Link Ends lbs. (kg) 20,345 (9,228)
3-POINT HITCH – FRONT (OPT.)
Category 3 Standard
Maximum lift capacity — At Link Ends lbs. (kg) 10,970 (4,976)
DRAWBAR
Category 3 with drop pin Standard
Category 3 heavy duty with drop pin Optional
Category 4 with drop pin Optional
PTO
Speeds RPM — standard 1,000 / 1,000E
Shaft diameter in. (mm) 1.75 in. (45 mm) shaft, 20 spline
HYDRAULICS
System type Closed Center Load Sensing (CCLS)
Total flow rate US gallon (L) 54 (205)
Maximum pressure PSI (bar) 2,900 (200)
Remote Valves — Standard/Optional Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves
OPERATOR AREA
Cab glass area ft2 (m2) 67.3 (6.22)
Noise level dB(A) 71
OptiRide Plus hydraulic suspended cab Standard
Operator seat — air suspension Standard
Control Center Display (CCD) Standard
TECHNOLOGY
Auto-Guide 3000 Standard
AgCommand AgCommand ready standard, subscription optional
DIMENSION& WEIGHT*
Wheelbase in. (mm) 122 (3,100)
Overall length-front wt. frame to rear link arms in. (mm) 218.6 (5,552)
Maximum height over cab in. (mm) 141 (3,584)
Approx. shipping weight lbs. (kg) 23,810 (10,800)
Maximum allowable weight lbs. (kg) 33,070 (15,000)
Fuel CAPACITY
Fuel tank capacity US gallon (L) 166 (630)
DEF (AdBlue) usable tank capacity US gallon (L) 15.8 (60)
 

 

                     Massey Ferguson 8735 Tractor

 
massey-ferguson-8735-tractor

 

Massey Ferguson 8735 Tractor Key Features

  • Engine Model: AGCO POWER™ 8.4L
  • Transmission: Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
  • Hydraulic System: Closed center load sensing (CCLS)
  • Maximum Horsepower: 350HP
  • PTO HP: 275HP
  • Rear Lift Capacity @ link ends: 26,455lbs
  • Fuel Tank Capacity: 630Ltr.

 

Massey Ferguson 8735 Tractor Price

The Massey Ferguson 8735 Tractor Price is  $270,000.

 

Massey Ferguson 8735 Tractor Specs

ENGINE PERFORMANCE
Maximum ISO engine HP @ 2,000 engine RPM (kW) 350 (261)
ISO engine HP @ 2,100 rated engine RPM (kW) 320 (239)
PTO HP @ 2,100 rated engine RPM (kW) 275 (205)
Type — standard AGCO POWER™ 8.4L
Number of cylinder 6
Displacement liters (CID) 8.4 (514)
Aspiration Twin Turbo Chargers with eWastegate
Alternator / battery (standard) 240 amps / 12 V (twin 120 amp alternators)
TRANSMISSION SYSTEM
Type Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
Field speed range 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse)
Road speed range 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse)
Road speed range — 40 kph — optional Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse)
Speeds forward Infinite
Cruise control speeds 4
REAR AXLE
4.33 x 118 in. (110 x 2,999 mm) long axle Standard
4.33 x 105 in (110 x 2,550 mm) short axle Optional
Differential lock — full-locking, electrohydraulic Standard
FRONT AXLE
4-wheel drive differential lock Standard – full-locking, electrohydraulic
4-wheel drive maximum steering angle 55º
3 POINT HITCH REAR
Category 3/4N Quick Hitch Standard
Maximum lift capacity — At Link Ends lbs. (kg) 20,345 (9,228)
3-POINT HITCH – FRONT (OPT.)
Category 3 Standard
Maximum lift capacity — At Link Ends lbs. (kg) 10,970 (4,976)
DRAWBAR
Category 3 with drop pin Standard
Category 3 heavy duty with drop pin Optional
Category 4 with drop pin Optional
PTO
Speeds RPM — standard 1,000 / 1,000E
Shaft diameter in. (mm) 1.75 in. (45 mm) shaft, 20 spline
HYDRAULICS
System type Closed Center Load Sensing (CCLS)
Total flow rate US gallon (L) 54 (205)
Maximum pressure PSI (bar) 2,900 (200)
Remote Valves — Standard/Optional Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves
OPERATOR AREA
Cab glass area ft2 (m2) 67.3 (6.22)
Noise level dB(A) 71
OptiRide Plus hydraulic suspended cab Standard
Operator seat — air suspension Standard
Control Center Display (CCD) Standard
TECHNOLOGY
Auto-Guide 3000 Standard
AgCommand AgCommand ready standard, subscription optional
DIMENSION& WEIGHT*
Wheelbase in. (mm) 122 (3,100)
Overall length-front wt. frame to rear link arms in. (mm) 218.6 (5,552)
Maximum height over cab in. (mm) 141 (3,584)
Approx. shipping weight lbs. (kg) 23,810 (10,800)
Maximum allowable weight lbs. (kg) 33,070 (15,000)
Fuel CAPACITY
Fuel tank capacity US gallon (L) 166 (630)
DEF (AdBlue) usable tank capacity US gallon (L) 15.8 (60)
 

 

                       Massey Ferguson 8737 Tractor

 

 
massey-ferguson-8737-tractor

Massey Ferguson 8737 Tractor Key Features

  • Engine Model: AGCO POWER™ 8.4L
  • Transmission: Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
  • Hydraulic System: Closed center load sensing (CCLS)
  • Maximum Horsepower: 370HP
  • PTO HP: 290HP
  • Rear Lift Capacity @ link ends: 26,455lbs
  • Fuel Tank Capacity: 630Ltr.

 

Massey Ferguson 8737 Tractor Price

The Massey Ferguson 8737 Tractor Price is $296,796.

 

Massey Ferguson 8737 Tractor Specs

ENGINE PERFORMANCE
Maximum ISO engine HP @ 2,000 engine RPM (kW) 370 (276)
ISO engine HP @ 2,100 rated engine RPM (kW) 340 (254)
PTO HP @ 2,100 rated engine RPM (kW) 290 (216)
Type — standard AGCO POWER™ 8.4L
Number of cylinder 6
Displacement liters (CID) 8.4 (514)
Aspiration Twin Turbo Chargers with eWastegate
Alternator / battery (standard) 240 amps / 12 V (twin 120 amp alternators)
TRANSMISSION SYSTEM
Type Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
Field speed range 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse)
Road speed range 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse)
Road speed range — 40 kph — optional Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse)
Speeds forward Infinite
Cruise control speeds 4
REAR AXLE
4.33 x 118 in. (110 x 2,999 mm) long axle Standard
4.33 x 105 in (110 x 2,550 mm) short axle Optional
Differential lock — full-locking, electrohydraulic Standard
FRONT AXLE
4-wheel drive differential lock Standard – full-locking, electrohydraulic
4-wheel drive maximum steering angle 55º
3 POINT HITCH REAR
Category 3/4N Quick Hitch Standard
Maximum lift capacity — At Link Ends lbs. (kg) 20,345 (9,228)
3-POINT HITCH – FRONT (OPT.)
Category 3 Standard
Maximum lift capacity — At Link Ends lbs. (kg) 10,970 (4,976)
DRAWBAR
Category 3 with drop pin Standard
Category 3 heavy duty with drop pin Optional
Category 4 with drop pin Optional
PTO
Speeds RPM — standard 1,000 / 1,000E
Shaft diameter in. (mm) 1.75 in. (45 mm) shaft, 20 spline
HYDRAULICS
System type Closed Center Load Sensing (CCLS)
Total flow rate US gallon (L) 54 (205)
Maximum pressure PSI (bar) 2,900 (200)
Remote Valves — Standard/Optional Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves
OPERATOR AREA
Cab glass area ft2 (m2) 67.3 (6.22)
Noise level dB(A) 71
OptiRide Plus hydraulic suspended cab Standard
Operator seat — air suspension Standard
Control Center Display (CCD) Standard
TECHNOLOGY
Auto-Guide 3000 Standard
AgCommand AgCommand ready standard, subscription optional
DIMENSION& WEIGHT*
Wheelbase in. (mm) 122 (3,100)
Overall length-front wt. frame to rear link arms in. (mm) 218.6 (5,552)
Maximum height over cab in. (mm) 141 (3,584)
Approx. shipping weight lbs. (kg) 23,810 (10,800)
Maximum allowable weight lbs. (kg) 33,070 (15,000)
Fuel CAPACITY
Fuel tank capacity US gallon (L) 166 (630)
DEF (AdBlue) usable tank capacity US gallon (L) 15.8 (60)
 

 

Final Conclusion

The MF 8700 Series is built with pride in Jackson, MN, inthe newly developed plant that assembles all our high horsepower row crop tractors. It’s where our sprayers, track and 4WD tractors have been made for farmers, by farmers, for many years. I hope you like this article, but if you have any query regarding this article, then please comment below in the comment box, I will solve your problem solution as soon.thanks for reading my article and keep smile 😆 .


zala suraj

Leave a Reply

Your email address will not be published. Required fields are marked *