0

John Deere Track Tractors 9RX Series Price Specs Features

Hey, Guys Hi!! Hope you all doing well and Most welcome to our site. I am your tractor guide come friend here as usual and Today Here in this article, I am going present the John Deere 9RX Series 9470RX, 9520RX, 9570RX, 9620RX, 9470RX Scraper Special, 9520RX Scraper Special and 9570RX Scraper Special Tractors information like that price List in The USA, Key Facts, Specs, Images and more.

The John deere 9RX Series Tractors are the perfect combination of performance, power, and intelligence all wrapped up in a 4-Track. Its key features such as 470 to 620 engine HP, proven Final Tier 4 engines, integrated technology, and increased hydraulic flow.

Designed to pull large tools through a variety of farming situations, the John deer 9RX series tractors covers more acres in less time, improving yield potential and profitability.


Read Also:

Kubota All Tractors Info.

John Deere 9RT Series Tractors Info.

John Deere 9470RX Tractor

John Deere 9470RX Track Tractor

 

John Deere 9470RX Tractor Price

  • $554,549 USD

John Deere 9470RX Tractor Quick facts

  • John Deere PowerTech 13.5L Engine
  • e18™ PowerShift Transmission
  • New Cab Suspension
  • CommandView™ III cab
  • Horsepower: 470 engine hp
  • PTO Power: 335 hp
  • Hitch Capacity: 9072 kg
  • Drawbar Capacity: 5440 kg

John Deere 9470RX Tractor Technical Specifications

POWER
Rated PTO power (hp SAE) at rated PTO speed (1895 erpm)* 335 hp (250 kW)
Rated Engine power PS (hp ISO) at 2100 engine rpm (97/68EC)† 470 hp (346 kW)
Max Engine power PS (hp ISO) at 1900 engine rpm (97/68EC)† 517 hp (380 kW)
Torque Rise (Nominal Engine) at 1600 rpm 38%
Power Bulge (Nominal Engine) at 1900 rpm 10%
ENGINE (US EPA Tier4/EU Stage IV)
Manufacturer John Deere PowerTech™ PSS 13.5L
Rated Speed 2,100 rpm
Type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Aspiration Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage – air-to-air aftercooling and cooled exhaust gas recirculation
Filter, engine air Dual stage with exhaust aspiration
Displacement 824 cu in. (13.5L)
Bore and stroke 5.2 in. (132 mm) x 6.5 in. (165 mm)
Compression ratio 16:0:1
Lubrication Full-pressure, full-flow filtration with bypass
Filter, oil Replaceable spin-on style oil filter
FUEL SYSTEM
Description Electronically controlled, electronic unit injectors (self priming)
Filter system Two Stage with water separator and service indicator light
Filter, primary 10 micron replaceable cartridge w/water indication sensor and drain
Filter, secondary 2 micron spin-on element
TRANSMISSION
Description e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™
ELECTRICAL SYSTEM
Alternator/Battery 200 amps / 12 Volt – 240 amps / 12 Volt Optional
Batteries – 925 CCA 3
AXLE FINAL DRIVES
Description Bull gear and double idler with floating pinion
AXLES
120 mm flanged Standard
Rear axle supports Available (included with 3 point hitch)
Front axle supports Available (with sprayer tanks or dozer blade)
TRACK BELTS
Description Camoplast® Durabuilt® 3500 Series and Camoplast Durabuilt 6500 Series with Duradrive Technology Track Belts
30-in. (762 mm) wide belt Standard
36-in. (914 mm) wide belt Available
STEERING
Hydraulic power-steering Standard
Active Command Steering (ACS) Available
DIFFERENTIAL LOCK
Full-Locking electrohydraulic, front and rear axle, with AutoMode Standard
Auto disengagement for various selectable turn angles Standard
HYDRAULIC SYSTEM
Description Closed-center, pressure/flow compensated
Selective control valves 4 – 6 factory, up to 8 field installed
Maximum pressure 2,900 psi (20,000 kPa )
Maximum pump flow with Base Hydraulics Standard: 58 U.S. gpm / 220 Lpm
Maximum pump flow: High-Flow Available: 115 U.S. gpm/ 435 Lpm
Available flow at a single SCV – 1 /2 in. coupler 35 U.S. gpm / 132 lpm
Available flow at a single SCV with High-Flow – 3 /4 in. coupler Field Installed Option – 42 U.S. gpm / 159 lpm
3-POINT HITCH
Description Electric-Hydraulic 3-Point Hitch with Draft Sensing
Category 4N/3 with Quik-Coupler Available: 15000 lb (6804 kg)
Category 4N/3 with Quik-Coupler Available: 20000 lb (9072 kg)
Category 4N/4 with Quik-Coupler Available: 15000 lb (6804 kg)
Category 4N/4 with Quik-Coupler Available: 20000 lb (9072 kg)
DRAWBAR
Cat 4 w/ HD Drawbar Support, 4990 kg (11000 lb) Max Vertical Load Standard
Cat 5 w/ HD Drawbar Support 5440 kg (12000 lb) Max Vertical Load Available
Drawbar Support for Long Scraper Drawbars
Drawbar Support for Short Scraper Drawbars
PTO (power take off), Rear, Independent
1-3 /4 in., 20-spline, 1,000-rpm Available
CONNECTIONS
AutoTrac™ Ready Standard
Modular Telematics Gateway (MTG) Available with JDLink™ hardware, activations and Ethernet Harnesses (availability dependent upon destination)
ServiceADVISOR™ Remote Available with JDLink™ hardware and activations
ISOBUS Implement Connection Standard (ISO 11783)
Command Center Video w/ 4100 Processor Single video input (Tyco Connector PN 776536-1) for camera using PAL or NTSC signal. Integrated behind rear cab cover. Camera and extension harness available through parts
Command Center Video w/ 4600 Processor Four video inputs (Tyco Connector PN 776536-1) for camera using PAL or NTSC signal. Integrated behind rear cab cover. Camera and extension harness available through parts
CAPACITIES
Fuel Tank 400 gal (1514 L)
DEF Tank 22 gal (83 L)
Cooling System 14.9 gal (56.5 L)
Crankcase with filter 12.7 gal (48 L)
Hydraulic/transmission/axle oil without 3-point rear hitch and PTO 58 gal ( 220 L)
Hydraulic/transmission/axle oil with 3-point rear hitch and PTO 60 gal (227 L)
 BRAKES
 Hydraulic power, wet disk, self adjusting on front and rear axle  Standard
 Hydraulic trailer brakes  Available
WHEELBASE
Wheelbase length 163.5 in. (4154 mm
Turning Radius*** 21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models
MISCELLANEOUS
Drivers Ear Noise Level per 77/311/EEC TBD
Cab glass area 70.18 sq ft (6.52 sq m)
Cab volume 127 cu ft (3.597 cu. M)
Degrees of Articulation 36° of Articulation on Ag models / 24° on Scraper Special models
Degrees of Oscillation Gudgeon area oscillation is 15°
Degrees of Undercarriage Oscillation ±10°
Estimated Shipping Weight 56,000 lb (25,401 kg) – tractor equipped with standard tracks, no PTO, and no 3-point rear hitch
Max Operating Weight 62,000 lb (28,123 kg)
 

John Deere 9520RX Tractor

John Deere 9520RX Track Tractor

 

John Deere 9520RX Tractor Price

  •  $523,359 USD

John Deere 9520RX Tractor Quick facts

  • John Deere PowerTech 13.5L Engine
  • e18™ PowerShift Transmission
  • New Cab Suspension
  • CommandView™ III cab
  • Horsepower: 520 engine hp
  • PTO Power: 335 hp
  • Hitch Capacity: 9072 kg
  • Drawbar Capacity: 5440 kg

John Deere 9520RX Tractor Technical Specifications

POWER
Rated PTO power (hp SAE) at rated PTO speed (1895 erpm)* 335 hp (250 kW)
Rated Engine power PS (hp ISO) at 2100 engine rpm (97/68EC)† 520 hp (382 kW)
Max Engine power PS (hp ISO) at 1900 engine rpm (97/68EC)† 572 hp (421 kW)
Torque Rise (Nominal Engine) at 1600 rpm 38%
Power Bulge (Nominal Engine) at 1900 rpm 10%
ENGINE (US EPA Tier4/EU Stage IV)
Manufacturer John Deere PowerTech™ PSS 13.5L
Rated Speed 2,100 rpm
Type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Aspiration Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage – air-to-air aftercooling and cooled exhaust gas recirculation
Filter, engine air Dual stage with exhaust aspiration
Displacement 824 cu in. (13.5L)
Bore and stroke 5.2 in. (132 mm) x 6.5 in. (165 mm)
Compression ratio 16:0:1
Lubrication Full-pressure, full-flow filtration with bypass
Filter, oil Replaceable spin-on style oil filter
FUEL SYSTEM
Description Electronically controlled, electronic unit injectors (self priming)
Filter system Two Stage with water separator and service indicator light
Filter, primary 10 micron replaceable cartridge w/water indication sensor and drain
Filter, secondary 2 micron spin-on element
TRANSMISSION
Description e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™
ELECTRICAL SYSTEM
Alternator/Battery 200 amps / 12 Volt – 240 amps / 12 Volt Optional
Batteries – 925 CCA 3
AXLE FINAL DRIVES
Description Bull gear and double idler with floating pinion
AXLES
120 mm flanged Standard
Rear axle supports Available (included with 3 point hitch)
Front axle supports Available (with sprayer tanks or dozer blade)
TRACK BELTS
Description Camoplast® Durabuilt® 3500 Series and Camoplast Durabuilt 6500 Series with Duradrive Technology Track Belts
30-in. (762 mm) wide belt Standard
36-in. (914 mm) wide belt Available
STEERING
Hydraulic power-steering Standard
Active Command Steering (ACS) Available
DIFFERENTIAL LOCK
Full-Locking electrohydraulic, front and rear axle, with AutoMode Standard
Auto disengagement for various selectable turn angles Standard
HYDRAULIC SYSTEM
Description Closed-center, pressure/flow compensated
Selective control valves 4 – 6 factory, up to 8 field installed
Maximum pressure 2,900 psi (20,000 kPa )
Maximum pump flow with Base Hydraulics Standard: 58 U.S. gpm / 220 Lpm
Maximum pump flow: High-Flow Available: 115 U.S. gpm/ 435 Lpm
Available flow at a single SCV – 1 /2 in. coupler 35 U.S. gpm / 132 lpm
Available flow at a single SCV with High-Flow – 3 /4 in. coupler Field Installed Option – 42 U.S. gpm / 159 lpm
3-POINT HITCH
Description Electric-Hydraulic 3-Point Hitch with Draft Sensing
Category 4N/3 with Quik-Coupler
Category 4N/3 with Quik-Coupler
Category 4N/4 with Quik-Coupler Available: 15000 lb (6804 kg)
Category 4N/4 with Quik-Coupler Available: 20000 lb (9072 kg)
DRAWBAR
Cat 4 w/ HD Drawbar Support, 4990 kg (11000 lb) Max Vertical Load
Cat 5 w/ HD Drawbar Support 5440 kg (12000 lb) Max Vertical Load Standard
Drawbar Support for Long Scraper Drawbars
Drawbar Support for Short Scraper Drawbars
PTO (power take off), Rear, Independent
1-3 /4 in., 20-spline, 1,000-rpm Available
CONNECTIONS
AutoTrac™ Ready Standard
Modular Telematics Gateway (MTG) Available with JDLink™ hardware, activations and Ethernet Harnesses (availability dependent upon destination)
ServiceADVISOR™ Remote Available with JDLink™ hardware and activations
ISOBUS Implement Connection Standard (ISO 11783)
Command Center Video w/ 4100 Processor Single video input (Tyco Connector PN 776536-1) for camera using PAL or NTSC signal. Integrated behind rear cab cover. Camera and extension harness available through parts
Command Center Video w/ 4600 Processor Four video inputs (Tyco Connector PN 776536-1) for camera using PAL or NTSC signal. Integrated behind rear cab cover. Camera and extension harness available through parts
CAPACITIES
Fuel Tank 400 gal (1514 L)
DEF Tank 22 gal (83 L)
Cooling System 14.9 gal (56.5 L)
Crankcase with filter 12.7 gal (48 L)
Hydraulic/transmission/axle oil without 3-point rear hitch and PTO 58 gal ( 220 L)
Hydraulic/transmission/axle oil with 3-point rear hitch and PTO 60 gal (227 L)
 BRAKES
 Hydraulic power, wet disk, self adjusting on front and rear axle  Standard
 Hydraulic trailer brakes  Available
WHEELBASE
Wheelbase length 163.5 in. (4154 mm
Turning Radius*** 21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models
MISCELLANEOUS
Drivers Ear Noise Level per 77/311/EEC TBD
Cab glass area 70.18 sq ft (6.52 sq m)
Cab volume 127 cu ft (3.597 cu. M)
Degrees of Articulation 36° of Articulation on Ag models / 24° on Scraper Special models
Degrees of Oscillation Gudgeon area oscillation is 15°
Degrees of Undercarriage Oscillation ±10°
Estimated Shipping Weight 56,000 lb (25,401 kg) – tractor equipped with standard tracks, no PTO, and no 3-point rear hitch
Max Operating Weight 62,000 lb (28,123 kg)
 

John Deere 9570RX Tractor

John Deere 9570RX Tractor

 


John Deere 9570RX Tractor Price

  •  $549,072 USD

John Deere 9570RX Tractor Quick facts

  • Cummins QSX15 Engine
  • e18™ PowerShift Transmission
  • New Cab Suspension
  • CommandView™ III cab
  • Horsepower: 570 engine hp
  • PTO Power: 335 hp
  • Hitch Capacity: 9072 kg
  • Drawbar Capacity: 5440 kg

John Deere 9570RX Tractor Technical Specifications

POWER
Rated PTO power (hp SAE) at rated PTO speed (1895 erpm)* 335 hp (250 kW)
Rated Engine power PS (hp ISO) at 2100 engine rpm (97/68EC)† 570 hp (419 kW)
Max Engine power PS (hp ISO) at 1900 engine rpm (97/68EC)† 628 hp (461 kW)
Torque Rise (Nominal Engine) at 1600 rpm 38%
Power Bulge (Nominal Engine) at 1900 rpm 10%
ENGINE (US EPA Tier4/EU Stage IV)
Manufacturer Cummins QSX15
Rated Speed 2,100 rpm
Type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Aspiration Single Variable geometry turbocharger air-to-air aftercooling and cooled exhaust gas recirculation
Filter, engine air Dual stage with exhaust aspiration
Displacement 912 cu in. (14.9L)
Bore and stroke 5.39 in (137mm) x 6.65 in (169mm
Compression ratio 17.2:1
Lubrication Full-pressure, full-flow filtration with bypass
Filter, oil Replaceable spin-on style oil filter
FUEL SYSTEM
Description High Pressure Common Rail (self priming)
Filter system Two Stage with water separator and service indicator light
Filter, primary 7 micron spin-on style with water in fuel sensor and drain
Filter, secondary 3 micron spin-on element
TRANSMISSION
Description e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™
ELECTRICAL SYSTEM
Alternator/Battery 200 amps / 12 Volt – 240 amps / 12 Volt Optional
Batteries – 925 CCA 4
AXLE FINAL DRIVES
Description Bull gear and double idler with floating pinion
AXLES
120 mm flanged Standard
Rear axle supports Available (included with 3 point hitch)
Front axle supports Available (with sprayer tanks or dozer blade)
TRACK BELTS
Description Camoplast® Durabuilt® 3500 Series and Camoplast Durabuilt 6500 Series with Duradrive Technology Track Belts
30-in. (762 mm) wide belt Standard
36-in. (914 mm) wide belt Available
STEERING
Hydraulic power-steering Standard
Active Command Steering (ACS) Available
DIFFERENTIAL LOCK
Full-Locking electrohydraulic, front and rear axle, with AutoMode Standard
Auto disengagement for various selectable turn angles Standard
HYDRAULIC SYSTEM
Description Closed-center, pressure/flow compensated
Selective control valves 4 – 6 factory, up to 8 field installed
Maximum pressure 2,900 psi (20,000 kPa )
Maximum pump flow with Base Hydraulics Standard: 58 U.S. gpm / 220 Lpm
Maximum pump flow: High-Flow Available: 115 U.S. gpm/ 435 Lpm
Available flow at a single SCV – 1 /2 in. coupler 35 U.S. gpm / 132 lpm
Available flow at a single SCV with High-Flow – 3 /4 in. coupler Field Installed Option – 42 U.S. gpm / 159 lpm
3-POINT HITCH
Description Electric-Hydraulic 3-Point Hitch with Draft Sensing
Category 4N/3 with Quik-Coupler
Category 4N/3 with Quik-Coupler
Category 4N/4 with Quik-Coupler Available: 15000 lb (6804 kg)
Category 4N/4 with Quik-Coupler Available: 20000 lb (9072 kg)
DRAWBAR
Cat 4 w/ HD Drawbar Support, 4990 kg (11000 lb) Max Vertical Load
Cat 5 w/ HD Drawbar Support 5440 kg (12000 lb) Max Vertical Load Standard
Drawbar Support for Long Scraper Drawbars
Drawbar Support for Short Scraper Drawbars
PTO (power take off), Rear, Independent
1-3 /4 in., 20-spline, 1,000-rpm Available
CONNECTIONS
AutoTrac™ Ready Standard
Modular Telematics Gateway (MTG) Available with JDLink™ hardware, activations and Ethernet Harnesses (availability dependent upon destination)
ServiceADVISOR™ Remote Available with JDLink™ hardware and activations
ISOBUS Implement Connection Standard (ISO 11783)
Command Center Video w/ 4100 Processor Single video input (Tyco Connector PN 776536-1) for camera using PAL or NTSC signal. Integrated behind rear cab cover. Camera and extension harness available through parts
Command Center Video w/ 4600 Processor Four video inputs (Tyco Connector PN 776536-1) for camera using PAL or NTSC signal. Integrated behind rear cab cover. Camera and extension harness available through parts
CAPACITIES
Fuel Tank 400 gal (1514 L)
DEF Tank 22 gal (83 L)
Cooling System 16.3 gal (62 L)
Crankcase with filter 11.5 gal (43.5 L)
Hydraulic/transmission/axle oil without 3-point rear hitch and PTO 58 gal ( 220 L)
Hydraulic/transmission/axle oil with 3-point rear hitch and PTO 60 gal (227 L)
 BRAKES
 Hydraulic power, wet disk, self adjusting on front and rear axle  Standard
 Hydraulic trailer brakes  Available
WHEELBASE
Wheelbase length 163.5 in. (4154 mm
Turning Radius*** 21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models
MISCELLANEOUS
Drivers Ear Noise Level per 77/311/EEC TBD
Cab glass area 70.18 sq ft (6.52 sq m)
Cab volume 127 cu ft (3.597 cu. M)
Degrees of Articulation 36° of Articulation on Ag models / 24° on Scraper Special models
Degrees of Oscillation Gudgeon area oscillation is 15°
Degrees of Undercarriage Oscillation ±10°
Estimated Shipping Weight 56,000 lb (25,401 kg) – tractor equipped with standard tracks, no PTO, and no 3-point rear hitch
Max Operating Weight 62,000 lb (28,123 kg)
 

John Deere 9620RX Tractor

John Deere 9620RX Tractor

 

John Deere 9620RX Tractor Price

  • $574,786 USD

John Deere 9620RX Tractor Quick facts

  • Cummins QSX15 Engine
  • e18™ PowerShift Transmission
  • New Cab Suspension
  • CommandView™ III cab
  • Horsepower: 620 engine hp
  • PTO Power: 335 hp
  • Hitch Capacity: 9072 kg
  • Drawbar Capacity: 5440 kg

John Deere 9620RX Tractor Technical Specifications

POWER
Rated PTO power (hp SAE) at rated PTO speed (1895 erpm)* 335 hp (250 kW)
Rated Engine power PS (hp ISO) at 2100 engine rpm (97/68EC)† 620 hp (456 kW)
Max Engine power PS (hp ISO) at 1900 engine rpm (97/68EC)† 670 hp (492 kW)
Torque Rise (Nominal Engine) at 1600 rpm 36%
Power Bulge (Nominal Engine) at 1900 rpm 8%
ENGINE (US EPA Tier4/EU Stage IV)
Manufacturer Cummins QSX15
Rated Speed 2,100 rpm
Type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Aspiration Single Variable geometry turbocharger air-to-air aftercooling and cooled exhaust gas recirculation
Filter, engine air Dual stage with exhaust aspiration
Displacement 912 cu in. (14.9L)
Bore and stroke 5.39 in (137mm) x 6.65 in (169mm
Compression ratio 17.2:1
Lubrication Full-pressure, full-flow filtration with bypass
Filter, oil Replaceable spin-on style oil filter
FUEL SYSTEM
Description High Pressure Common Rail (self priming)
Filter system Two Stage with water separator and service indicator light
Filter, primary 7 micron spin-on style with water in fuel sensor and drain
Filter, secondary 3 micron spin-on element
TRANSMISSION
Description e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™
ELECTRICAL SYSTEM
Alternator/Battery 200 amps / 12 Volt – 240 amps / 12 Volt Optional
Batteries – 925 CCA 4
AXLE FINAL DRIVES
Description Bull gear and double idler with floating pinion
AXLES
120 mm flanged Standard
Rear axle supports Available (included with 3 point hitch)
Front axle supports Available (with sprayer tanks or dozer blade)
TRACK BELTS
Description Camoplast® Durabuilt® 3500 Series and Camoplast Durabuilt 6500 Series with Duradrive Technology Track Belts
30-in. (762 mm) wide belt Standard
36-in. (914 mm) wide belt Available
STEERING
Hydraulic power-steering Standard
Active Command Steering (ACS) Available
DIFFERENTIAL LOCK
Full-Locking electrohydraulic, front and rear axle, with AutoMode Standard
Auto disengagement for various selectable turn angles Standard
HYDRAULIC SYSTEM
Description Closed-center, pressure/flow compensated
Selective control valves 4 – 6 factory, up to 8 field installed
Maximum pressure 2,900 psi (20,000 kPa )
Maximum pump flow with Base Hydraulics Standard: 58 U.S. gpm / 220 Lpm
Maximum pump flow: High-Flow Available: 115 U.S. gpm/ 435 Lpm
Available flow at a single SCV – 1 /2 in. coupler 35 U.S. gpm / 132 lpm
Available flow at a single SCV with High-Flow – 3 /4 in. coupler Field Installed Option – 42 U.S. gpm / 159 lpm
3-POINT HITCH
Description Electric-Hydraulic 3-Point Hitch with Draft Sensing
Category 4N/3 with Quik-Coupler
Category 4N/3 with Quik-Coupler
Category 4N/4 with Quik-Coupler Available: 15000 lb (6804 kg)
Category 4N/4 with Quik-Coupler Available: 20000 lb (9072 kg)
DRAWBAR
Cat 4 w/ HD Drawbar Support, 4990 kg (11000 lb) Max Vertical Load
Cat 5 w/ HD Drawbar Support 5440 kg (12000 lb) Max Vertical Load Standard
Drawbar Support for Long Scraper Drawbars
Drawbar Support for Short Scraper Drawbars
PTO (power take off), Rear, Independent
1-3 /4 in., 20-spline, 1,000-rpm Available
CONNECTIONS
AutoTrac™ Ready Standard
Modular Telematics Gateway (MTG) Available with JDLink™ hardware, activations and Ethernet Harnesses (availability dependent upon destination)
ServiceADVISOR™ Remote Available with JDLink™ hardware and activations
ISOBUS Implement Connection Standard (ISO 11783)
Command Center Video w/ 4100 Processor Single video input (Tyco Connector PN 776536-1) for camera using PAL or NTSC signal. Integrated behind rear cab cover. Camera and extension harness available through parts
Command Center Video w/ 4600 Processor Four video inputs (Tyco Connector PN 776536-1) for camera using PAL or NTSC signal. Integrated behind rear cab cover. Camera and extension harness available through parts
CAPACITIES
Fuel Tank 400 gal (1514 L)
DEF Tank 22 gal (83 L)
Cooling System 16.3 gal (62 L)
Crankcase with filter  11.5 gal (43.5 L)
Hydraulic/transmission/axle oil without 3-point rear hitch and PTO 58 gal ( 220 L)
Hydraulic/transmission/axle oil with 3-point rear hitch and PTO 60 gal (227 L)
 BRAKES
 Hydraulic power, wet disk, self adjusting on front and rear axle  Standard
 Hydraulic trailer brakes  Available
WHEELBASE
Wheelbase length 163.5 in. (4154 mm
Turning Radius*** 21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models
MISCELLANEOUS
Drivers Ear Noise Level per 77/311/EEC TBD
Cab glass area 70.18 sq ft (6.52 sq m)
Cab volume 127 cu ft (3.597 cu. M)
Degrees of Articulation 36° of Articulation on Ag models / 24° on Scraper Special models
Degrees of Oscillation Gudgeon area oscillation is 15°
Degrees of Undercarriage Oscillation ±10°
Estimated Shipping Weight 56,000 lb (25,401 kg) – tractor equipped with standard tracks, no PTO, and no 3-point rear hitch
Max Operating Weight 62,000 lb (28,123 kg)
 

John Deere 9470RX Scraper Special Tractor

John Deere 9470RX Scraper Special Tractor

 

John Deere 9470RX Scraper Special Tractor Price

  • NA

John Deere 9470RX Scraper Special Tractor Quick facts

  • John Deere PowerTech™ PSS 13.5L Engine
  • e18™ PowerShift Transmission
  • Horsepower: 470 engine hp
  • Displacement: 824 cu in. (13.5L)
  • Bore and stroke: 5.2 in. (132 mm) x 6.5 in. (165 mm)
  • Fuel Tank Capacity: 1514 Liter

John Deere 9470RX Scraper Special Tractor Specifications

POWER
Rated PTO power (hp SAE) at rated PTO speed (1895 erpm)*
Rated Engine power PS (hp ISO) at 2100 engine rpm (97/68EC)† 470 hp (346 kW)
Max Engine power PS (hp ISO) at 1900 engine rpm (97/68EC)† 517 hp (380 kW)
Torque Rise (Nominal Engine) at 1600 rpm 38%
Power Bulge (Nominal Engine) at 1900 rpm 10%
ENGINE (US EPA Tier4/EU Stage IV)
Manufacturer John Deere PowerTech™ PSS 13.5L
Rated Speed 2,100 rpm
Type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Aspiration Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage – air-to-air aftercooling and cooled exhaust gas recirculation
Filter, engine air Dual stage with exhaust aspiration
Displacement 824 cu in. (13.5L)
Bore and stroke 5.2 in. (132 mm) x 6.5 in. (165 mm)
Compression ratio 16:0:1
Lubrication Full-pressure, full-flow filtration with bypass
Filter, oil Replaceable spin-on style oil filter
FUEL SYSTEM
Description Electronically controlled, electronic unit injectors (self priming)
Filter system Two Stage with water separator and service indicator light
Filter, primary 10 micron replaceable cartridge w/water indication sensor and drain
Filter, secondary 2 micron spin-on element
TRANSMISSION
Description e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™
ELECTRICAL SYSTEM
Alternator/Battery 200 amps / 12 Volt – 240 amps / 12 Volt Optional
Batteries – 925 CCA 3
AXLE FINAL DRIVES
Description Bull gear and double idler with floating pinion
AXLES
120 mm flanged Standard
Rear axle supports Standard
Front axle supports Standard
TRACK BELTS
Description Camoplast Durabuilt 6500 Series with Duradrive Technology Track Belts
30-in. (762 mm) wide belt Standard
36-in. (914 mm) wide belt
STEERING
Hydraulic power-steering Standard
Active Command Steering (ACS) Available
DIFFERENTIAL LOCK
Full-Locking electrohydraulic, front and rear axle, with AutoMode Standard
Auto disengagement for various selectable turn angles Standard
HYDRAULIC SYSTEM
Description Closed-center, pressure/flow compensated
Selective control valves 4 Standard, 6 Available
Maximum pressure 2,900 psi (20,000 kPa )
Maximum pump flow with Base Hydraulics Standard: 58 U.S. gpm / 220 Lpm
Maximum pump flow: High-Flow Available: 115 U.S. gpm/ 435 Lpm
Available flow at a single SCV – 1 /2 in. coupler
Available flow at a single SCV with High-Flow – 3 /4 in. coupler 42 U.S. gpm/159 lpm
3-POINT HITCH
Description
Category 4N/3 with Quik-Coupler
Category 4N/3 with Quik-Coupler
Category 4N/4 with Quik-Coupler
Category 4N/4 with Quik-Coupler
DRAWBAR
Cat 4 w/ HD Drawbar Support, 4990 kg (11000 lb) Max Vertical Load
Cat 5 w/ HD Drawbar Support 5440 kg (12000 lb) Max Vertical Load
Drawbar Support for Long Scraper Drawbars
Drawbar Support for Short Scraper Drawbars Standard
PTO (power take off), Rear, Independent
1-3 /4 in., 20-spline, 1,000-rpm
CONNECTIONS
AutoTrac™ Ready Standard
Modular Telematics Gateway (MTG) Available with JDLink™ hardware, activations and Ethernet Harnesses (availability dependent upon destination)
ServiceADVISOR™ Remote Available with JDLink™ hardware and activations
ISOBUS Implement Connection Standard (ISO 11783)
Command Center Video w/ 4100 Processor Single video input (Tyco Connector PN 776536-1) for camera using PAL or NTSC signal. Integrated behind rear cab cover. Camera and extension harness available through parts
Command Center Video w/ 4600 Processor Four video inputs (Tyco Connector PN 776536-1) for camera using PAL or NTSC signal. Integrated behind rear cab cover. Camera and extension harness available through parts
CAPACITIES
Fuel Tank 400 gal (1514 L)
DEF Tank 22 gal (83 L)
Cooling System  14.9 gal (56.5 L)
Crankcase with filter 12.7 gal (48 L)
Hydraulic/transmission/axle oil without 3-point rear hitch and PTO 59 gal (223 L)
Hydraulic/transmission/axle oil with 3-point rear hitch and PTO
 BRAKES
 Hydraulic power, wet disk, self adjusting on front and rear axle  Standard
 Hydraulic trailer brakes  Available
WHEELBASE
Wheelbase length 163.5 in. (4154 mm
Turning Radius*** 21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models
MISCELLANEOUS
Drivers Ear Noise Level per 77/311/EEC TBD
Cab glass area 70.18 sq ft (6.52 sq m)
Cab volume 127 cu ft (3.597 cu. M)
Degrees of Articulation 36° of Articulation on Ag models / 24° on Scraper Special models
Degrees of Oscillation Gudgeon area oscillation is 15°
Degrees of Undercarriage Oscillation ±10°
Estimated Shipping Weight 56,000 lb (25,401 kg) – tractor equipped with standard tracks, no PTO, and no 3-point rear hitch
Max Operating Weight 62,000 lb (28,123 kg)
 

John Deere 9520RX Scraper Special Tractor

John Deere 9520RX Scraper Special Tractor

 

John Deere 9520RX Scraper Special Tractor Price

  • NA

John Deere 9520RX Scraper Special Tractor Quick facts

  • John Deere PowerTech™ PSS 13.5L Engine
  • e18™ PowerShift Transmission
  • Horsepower: 520 engine hp
  • Displacement: 824 cu in. (13.5L)
  • Bore and stroke: 5.2 in. (132 mm) x 6.5 in. (165 mm)
  • Fuel Tank Capacity: 1514 Liter

John Deere 9520RX Scraper Special Tractor Specifications

POWER
Rated PTO power (hp SAE) at rated PTO speed (1895 erpm)*
Rated Engine power PS (hp ISO) at 2100 engine rpm (97/68EC)† 520 hp (382 kW)
Max Engine power PS (hp ISO) at 1900 engine rpm (97/68EC)† 572 hp (421 kW)
Torque Rise (Nominal Engine) at 1600 rpm 38%
Power Bulge (Nominal Engine) at 1900 rpm 10%
ENGINE (US EPA Tier4/EU Stage IV)
Manufacturer John Deere PowerTech™ PSS 13.5L
Rated Speed 2,100 rpm
Type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Aspiration Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage – air-to-air aftercooling and cooled exhaust gas recirculation
Filter, engine air Dual stage with exhaust aspiration
Displacement 824 cu in. (13.5L)
Bore and stroke 5.2 in. (132 mm) x 6.5 in. (165 mm)
Compression ratio 16:0:1
Lubrication Full-pressure, full-flow filtration with bypass
Filter, oil Replaceable spin-on style oil filter
FUEL SYSTEM
Description Electronically controlled, electronic unit injectors (self priming)
Filter system Two Stage with water separator and service indicator light
Filter, primary 10 micron replaceable cartridge w/water indication sensor and drain
Filter, secondary 2 micron spin-on element
TRANSMISSION
Description e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™
ELECTRICAL SYSTEM
Alternator/Battery 200 amps / 12 Volt – 240 amps / 12 Volt Optional
Batteries – 925 CCA 3
AXLE FINAL DRIVES
Description Bull gear and double idler with floating pinion
AXLES
120 mm flanged Standard
Rear axle supports Standard
Front axle supports Standard
TRACK BELTS
Description Camoplast Durabuilt 6500 Series with Duradrive Technology Track Belts
30-in. (762 mm) wide belt Standard
36-in. (914 mm) wide belt
STEERING
Hydraulic power-steering Standard
Active Command Steering (ACS) Available
DIFFERENTIAL LOCK
Full-Locking electrohydraulic, front and rear axle, with AutoMode Standard
Auto disengagement for various selectable turn angles Standard
HYDRAULIC SYSTEM
Description Closed-center, pressure/flow compensated
Selective control valves 4 Standard, 6 Available
Maximum pressure 2,900 psi (20,000 kPa )
Maximum pump flow with Base Hydraulics Standard: 58 U.S. gpm / 220 Lpm
Maximum pump flow: High-Flow Available: 115 U.S. gpm/ 435 Lpm
Available flow at a single SCV – 1 /2 in. coupler
Available flow at a single SCV with High-Flow – 3 /4 in. coupler 42 U.S. gpm/159 lpm
3-POINT HITCH
Description
Category 4N/3 with Quik-Coupler
Category 4N/3 with Quik-Coupler
Category 4N/4 with Quik-Coupler
Category 4N/4 with Quik-Coupler
DRAWBAR
Cat 4 w/ HD Drawbar Support, 4990 kg (11000 lb) Max Vertical Load
Cat 5 w/ HD Drawbar Support 5440 kg (12000 lb) Max Vertical Load
Drawbar Support for Long Scraper Drawbars
Drawbar Support for Short Scraper Drawbars Standard
PTO (power take off), Rear, Independent
1-3 /4 in., 20-spline, 1,000-rpm
CONNECTIONS
AutoTrac™ Ready Standard
Modular Telematics Gateway (MTG) Available with JDLink™ hardware, activations and Ethernet Harnesses (availability dependent upon destination)
ServiceADVISOR™ Remote Available with JDLink™ hardware and activations
ISOBUS Implement Connection Standard (ISO 11783)
Command Center Video w/ 4100 Processor Single video input (Tyco Connector PN 776536-1) for camera using PAL or NTSC signal. Integrated behind rear cab cover. Camera and extension harness available through parts
Command Center Video w/ 4600 Processor Four video inputs (Tyco Connector PN 776536-1) for camera using PAL or NTSC signal. Integrated behind rear cab cover. Camera and extension harness available through parts
CAPACITIES
Fuel Tank 400 gal (1514 L)
DEF Tank 22 gal (83 L)
Cooling System  14.9 gal (56.5 L)
Crankcase with filter 12.7 gal (48 L)
Hydraulic/transmission/axle oil without 3-point rear hitch and PTO 59 gal (223 L)
Hydraulic/transmission/axle oil with 3-point rear hitch and PTO
 BRAKES
 Hydraulic power, wet disk, self adjusting on front and rear axle  Standard
 Hydraulic trailer brakes  Available
WHEELBASE
Wheelbase length 163.5 in. (4154 mm
Turning Radius*** 21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models
MISCELLANEOUS
Drivers Ear Noise Level per 77/311/EEC TBD
Cab glass area 70.18 sq ft (6.52 sq m)
Cab volume 127 cu ft (3.597 cu. M)
Degrees of Articulation 36° of Articulation on Ag models / 24° on Scraper Special models
Degrees of Oscillation Gudgeon area oscillation is 15°
Degrees of Undercarriage Oscillation ±10°
Estimated Shipping Weight 56,000 lb (25,401 kg) – tractor equipped with standard tracks, no PTO, and no 3-point rear hitch
Max Operating Weight 62,000 lb (28,123 kg)
 

John Deere 9570RX Scraper Special Tractor

John Deere 9570RX Scraper Special Tractor

 

John Deere 9570RX Scraper Special Tractor Price

  • NA

John Deere 9570RX Scraper Special Tractor Quick facts

  • Cummins QSX15 Engine
  • e18™ PowerShift Transmission
  • Horsepower: 570 engine hp
  • Displacement: 912 cu in. (14.9L)
  • Bore and stroke: 5.39 in (137mm) x 6.65 in (169mm)
  • Fuel Tank Capacity: 1514 Liter

John Deere 9570RX Scraper Special Tractor Specifications

POWER
Rated PTO power (hp SAE) at rated PTO speed (1895 erpm)*
Rated Engine power PS (hp ISO) at 2100 engine rpm (97/68EC)† 570 hp (419 kW)
Max Engine power PS (hp ISO) at 1900 engine rpm (97/68EC)† 628 hp (461 kW)
Torque Rise (Nominal Engine) at 1600 rpm 38%
Power Bulge (Nominal Engine) at 1900 rpm 10%
ENGINE (US EPA Tier4/EU Stage IV)
Manufacturer Cummins QSX15
Rated Speed 2,100 rpm
Type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Aspiration Single Variable geometry turbocharger air-to-air aftercooling and cooled exhaust gas recirculation
Filter, engine air Dual stage with exhaust aspiration
Displacement 912 cu in. (14.9L)
Bore and stroke 5.39 in (137mm) x 6.65 in (169mm)
Compression ratio 17.2:1
Lubrication Full-pressure, full-flow filtration with bypass
Filter, oil Replaceable spin-on style oil filter
FUEL SYSTEM
Description High Pressure Common Rail (self priming)
Filter system Two Stage with water separator and service indicator light
Filter, primary 7 micron spin-on style with water in fuel sensor and drain
Filter, secondary 3 micron spin-on element
TRANSMISSION
Description e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™
ELECTRICAL SYSTEM
Alternator/Battery 200 amps / 12 Volt – 240 amps / 12 Volt Optional
Batteries – 925 CCA 4
AXLE FINAL DRIVES
Description Bull gear and double idler with floating pinion
AXLES
120 mm flanged Standard
Rear axle supports Standard
Front axle supports Standard
TRACK BELTS
Description Camoplast Durabuilt 6500 Series with Duradrive Technology Track Belts
30-in. (762 mm) wide belt Standard
36-in. (914 mm) wide belt
STEERING
Hydraulic power-steering Standard
Active Command Steering (ACS) Available
DIFFERENTIAL LOCK
Full-Locking electrohydraulic, front and rear axle, with AutoMode Standard
Auto disengagement for various selectable turn angles Standard
HYDRAULIC SYSTEM
Description Closed-center, pressure/flow compensated
Selective control valves 4 Standard, 6 Available
Maximum pressure 2,900 psi (20,000 kPa )
Maximum pump flow with Base Hydraulics Standard: 58 U.S. gpm / 220 Lpm
Maximum pump flow: High-Flow Available: 115 U.S. gpm/ 435 Lpm
Available flow at a single SCV – 1 /2 in. coupler
Available flow at a single SCV with High-Flow – 3 /4 in. coupler 42 U.S. gpm/159 lpm
3-POINT HITCH
Description
Category 4N/3 with Quik-Coupler
Category 4N/3 with Quik-Coupler
Category 4N/4 with Quik-Coupler
Category 4N/4 with Quik-Coupler
DRAWBAR
Cat 4 w/ HD Drawbar Support, 4990 kg (11000 lb) Max Vertical Load
Cat 5 w/ HD Drawbar Support 5440 kg (12000 lb) Max Vertical Load
Drawbar Support for Long Scraper Drawbars
Drawbar Support for Short Scraper Drawbars Standard
PTO (power take off), Rear, Independent
1-3 /4 in., 20-spline, 1,000-rpm
CONNECTIONS
AutoTrac™ Ready Standard
Modular Telematics Gateway (MTG) Available with JDLink™ hardware, activations and Ethernet Harnesses (availability dependent upon destination)
ServiceADVISOR™ Remote Available with JDLink™ hardware and activations
ISOBUS Implement Connection Standard (ISO 11783)
Command Center Video w/ 4100 Processor Single video input (Tyco Connector PN 776536-1) for camera using PAL or NTSC signal. Integrated behind rear cab cover. Camera and extension harness available through parts
Command Center Video w/ 4600 Processor Four video inputs (Tyco Connector PN 776536-1) for camera using PAL or NTSC signal. Integrated behind rear cab cover. Camera and extension harness available through parts
CAPACITIES
Fuel Tank 400 gal (1514 L)
DEF Tank 22 gal (83 L)
Cooling System 16.3 gal (62 L)
Crankcase with filter 11.5 gal (43.5 L)
Hydraulic/transmission/axle oil without 3-point rear hitch and PTO 59 gal (223 L)
Hydraulic/transmission/axle oil with 3-point rear hitch and PTO
 BRAKES
 Hydraulic power, wet disk, self adjusting on front and rear axle  Standard
 Hydraulic trailer brakes  Available
WHEELBASE
Wheelbase length 163.5 in. (4154 mm
Turning Radius*** 21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models
MISCELLANEOUS
Drivers Ear Noise Level per 77/311/EEC TBD
Cab glass area 70.18 sq ft (6.52 sq m)
Cab volume 127 cu ft (3.597 cu. M)
Degrees of Articulation 36° of Articulation on Ag models / 24° on Scraper Special models
Degrees of Oscillation Gudgeon area oscillation is 15°
Degrees of Undercarriage Oscillation ±10°
Estimated Shipping Weight 56,000 lb (25,401 kg) – tractor equipped with standard tracks, no PTO, and no 3-point rear hitch
Max Operating Weight 62,000 lb (28,123 kg)
 

Above all kinds of information is genuine and reliable because I get all sorts of information through the official sites, that is very helpful to you for buy or sell these John Deere 9RX Series Track tractors, But if you have any problem with this post, then please comment in the below comment box, and if you like it so, please share it, my friends. Thanks for visiting our site. 

zala suraj

Leave a Reply

Your email address will not be published. Required fields are marked *